heviduty
Silver Member
- Joined
- Apr 18, 2012
- Messages
- 193
- Location
- central NC
- Tractor
- Kubota L3400HST/LA463 loader JD 318 / 3ph(cat. 0)
It wasn't bad, Slow & easy, I was just hoping that it was long enough to allow me some slack in the chain once I got it lifted up on the trailer to remove the chain (if it were to long loader might not lift the 900 lb tank) fortunately all worked well. I could have done some calc's to know for sure but it all looked right and besides it was just sitting in my scrap pile. I didn't want to make a bigger job out of it by building something like this. -->View attachment 568784
I got a little one.
View attachment 568906
I built something Similar to this with 4 X 4 X 3/16 5ft. long Outer Tube Steel and 3 1/2 X 3 1/2 X 3/16 6 ft. long inner Tube Steel for my MX5800 telescopes out the 10 ft from my quick connect front end. I also added a nice Swivel Hook with a shackle that can be moved between the 4 in and the and the 3 1/2 tube or removed all together.
Works great just have to be conscientious and careful when using it.
You should have gone bigger on the grapple^^
First timer. Would you be able to send me pictures of your creation (Jib Crane) "just have to be conscientious and careful when using it" one has to always be aware when using any equipt as things can go wrong fast. Thanks Bill
I will try and take some pic,s this afternoon and if I can figure out how to post them I will.