buckeyefarmer
Epic Contributor
Very foggy last night. But it was clear when I left for work It was dark out when I took the pic.
Last edited:
Ron, this is what we use around the farm for rodent control. We load up the trap with chunks and set them out in likely places. Works great and available at farm supply placesView attachment 773791
. Mounting is at the 4 corners. The leakage is in the finned area. Was hoping just a loose connection, but not.
That’s a slippery slope. I firmly agree that some books might be inappropriate, but that it should be up to the parents to instill their values on their children.Some books have no place in public school libraries.
I had one of the fittings split on my CK30 oil cooler. When I went to fit the new one it was obvious there was too much strain on one of the solid pipes. I had to reposition the pipe so it sat in the fitting correcly before tightening it. It had about a 1" gap so there had been a lot of strain on it.Good question Drew. Only way I see it could be if it somehow caused some sort of distortion (twisting) while in motion. Mounting is at the 4 corners. The leakage is in the finned area. Was hoping just a loose connection, but not.
View attachment 773797