Good Morning! 47F @ 6:10 AM. Abundant sunshine. High 69F. Winds NNW at 10 to 15 mph.
Today the water softener tech visits for the third time to try to fix the brine barrel problem. They've rebuilt the valve head, then replaced it, now they think there's an air leak in the siphon tube that pulls brine out of the barrel. The theory is that if the vacuum is only partial because of the leak, less water will be pulled out of the barrel than the controller thinks should be coming out, and that leads to the barrel eventually filling up, tripping the overflow switch, at which point the regeneration process is prevented until the water is bailed out of the brine barrel by hand. Until that happens I no longer have softened water, and the plumbing fixtures and dishes turn into a frosty mess. Again. Fortunately the revisits have not cost me anything, except for the first "repair", and the time tied up waiting for the repair tech to show up.
Got the winch mount bracket fabbed yesterday, and will get the winch mounted to the receiver today. It won't work until I can bring home some heavy cable to get battery power to the winch, but that just means a trip to the welding distributor later in the week, or maybe some Amazon shopping. Since this winch will move from vehicle to vehicle, and I'm not really keen on using alligator type clips to make the battery attachment, I'm looking around for a safer and weather tight alternative. Anyone using something they like? Maybe something like
this?