Good morning!!!!

   / Good morning!!!! #167,181  
Popgadget, hope the skies were gentle.

Didn’t go anywhere today. This was yesterday in SC. Had a headwind in both directions :(.


70188222898__FA0B5F09-854B-4B70-A83E-7B90AEC09433.fullsizerender.jpg


IMG_1410.jpg
 
   / Good morning!!!! #167,182  
   / Good morning!!!! #167,183  
Good (Saturday) morning. Overnight Low of 4.7C and it's presently 17.1C, clear, sunny with a bit of an occasional breeze. A late, yesterday, evening burst of heavy rain put 4.7mm into the gauge.

I gave the house a good vacuuming and then gave myself a haircut, beard trim and, finally, got those pesky ear hairs 'mowed'. Naturally, now that I've 'cleaned up my act', the temperature will turn cold. :rolleyes:

Well, it's the first of April so I've gone around and advanced all of my calendars. Later on I'll have to go around and adjust (fall back) all of my clocks as it's our turn to do so.

That's about it, take care all.
 
   / Good morning!!!! #167,184  
this morning's sunset over the ocean was beautiful.
Things must have changed since I have been back East.....

Doesn't the sun SET in the west? ...and in the evening?----- Where have I been?

....Or, Drew, you have been driving in that traffic too long!
;):ROFLMAO::ROFLMAO::ROFLMAO:
Couldn't resist.....
 
   / Good morning!!!! #167,185  
Things must have changed since I have been back East.....

Doesn't the sun SET in the west? Where have I been?

....Or, Drew, you have been driving in that traffic too long!
;):ROFLMAO::ROFLMAO::ROFLMAO:

And typically I was thinking that the sunset usually occurs in the evening ... but hey my schedule and personal clock is all messed up ... so I wouldn't discount anything as a possibility ...
 
   / Good morning!!!! #167,187  
Good evening all. 67ºF for the start, overcast breezy. Strong and gusty wind today, sky clear up late morning, and high temp was 82ºF. Cold front has come through(dry), low for day forecast to be 57ºF at midnight. Slow start to morning, bike ride early to avoid worst of the wind, wind penalty over 1 mile. After lunch started on firewood piles and downed limbs. Hauled 2 pickup loads to cleanup dumpsters available only this weekend. Then took nap but did not sleep as well. probably because of gusty winds.
Buppies hope you get more rain. Batteries came today. Hope you can nap today. Sorry about new skin cancer. prayers sent.
Bird kind of an abrupt change in temps. Hope you can take advantage of Farmers Market.
Ron we don't get that much rain most weeks. Glad shopping went well, hope hose cleaning is successful. At least on of your guests struck a good post.
Billy glad you met another goal on the AT. Sorry about your encounter with black flies.
Drew sorry about the beeping, now you won't have to listen to that beep all day again. Glad no bad weather yet. Hope you can hook up with Buppies.
Mike Fields are looking good. Good to hear milk house progressing. Nice pic
Bill hope shopping was successful. How long has it been since anything new introduced at startup meetings. Hope weather not as bad as predicted
Ken good to got some cleanup done. Good luck with view blocking.
James sorry about the burn restriction, anytime I had burn restriction it was to daylight hours. Nice pics
Paul glad flight had no issues. Hope Costco run was good.
Frits glad dirt moved, hope haircut better result than RS. nice pic
Chris hope you got branches cleaned up.
RNG hope you can get some outside work done during the dryer weather. Sorry about neither house panning out, Good luck finding new realtor. Glad pizza was good
Frits neat pic, not sure how far I would go out.
Ted glad hunt for boots and shoes successful. Sorry wind messing with plans.
David hope shopping went well. Hope new chicken cacciatore is good.
Drew sorry about I95 in SC. Glad no beeping and fewer ants. Meatloaf sounds good. hop you meant sunrise :)
Frits nice pic of mill.
Drew interesting AstroTurf.
Drew hop you can make meetup.
Thomas glad i kitty want brushing, hope not too much blood drawn by other kitty. Bet you are ready for winter to be over.
Paul sorry about headwind both ways, at least you had good seat :)
Randy(wag) nice temps and rain. Glad house and you are bot cleaned up.
Ted I think it's the traffic :(
prayer for all, especially Jay/Peg, Kyle /Daughter, /mom's breathing, /learning new job, /friends upcoming new baby, /son's migraines, Bird /aging issues, Ron /heart, Billy /mom hypertension & congestive heart failure, David(moss) /remodel, /divorce, Buppies /new skin cancer spot and treatment, /elbow healing, /wife knee healing, Thomas /gout, Phil /reflux, Frits /veteran son with mental issues, /granddaughter with Evans Syndrome, Ken /dad possible dementia, Steppenwolfe /son-auto immune disorder, Grev /wife's eye, Ted /knee recovery, /retirement & disability red tape, /family issues, Lou /eye issues, /loss of brother, /heart issues, Doug and wife/health issues, / hand nerve and surgery, /fall and recovery, / wife headaches and heart eval, / David(sadamo)/Sophie's and David's new eye surgery recovery, Chris /neighbor's granddaughter and Covid issues, Scaredy/shoulder dislocation, /marriage dissolving, / friend stop drinking, Paul/ wife's healing from back surgery, Dennis /retirement, /neighbor issues, /land development, / brother "alligallyitus" and back in hospital, Drew /foot heel issues, /friend's wife cancer diagnosis and recovery, mike /wife's healing from surgery, Scotty /back pain, Helogabals /second opinion, /wife's friend situation, Fatjay /father broken hip, Ukraine war, and Country.
 
   / Good morning!!!! #167,188  
53F and cloudy @ 22:00, heading up to 54F for the overnight low ... :oops:

:LOL:

Hearing rumbles of thunder currently, we are marginal risk of severe thunderstorms overnight.

Fairly productive day yesterday ... but did not get any feeders filled ... :(

Was up in the shop all night, went to bed around noon today.

Made the run up to Menards in the Falls and picked up electrical supplies yesterday. They were supposedly out of one item (4-prong 20A twist-lock receptacle)

I went back in up front after getting loaded and found it one shelf down a little ways over from where it was supposed to be, in the wrong box. So no trip back to pick up something they "were out of" ... (y)

However, I did order the incorrect cover plate for that receptacle for the box. Will return the incorrect one to Menards in Massillon for the correct one tomorrow when I'm down that way.

Guy finally got back to me on the metal enclosures - not exactly pristine, but looks like he has something that is serviceable and could work ... and the price is right:

IMG_4812 copy.jpg


IMG_4813 copy.jpg


IMG_4814 copy.jpg


IMG_4815 copy.jpg

Supposed to meet up with him tomorrow.

Trimmed out cabinet to something approaching a square hole:

IMG_2395 copy.jpg

Still searching for the "right" sheetmetal to cover it, have stuff that is too thin (16 gauge) or too thick (10 gauge) ... anything that I have that is close to the right thickness isn't big enough to cover the hole.

Unfortunate that it isn't exactly centered on the seam between the cabinet halves as it offends my sense of symmetry ... but I don't think I'm going to trim it out further.

One last application of silicone remover applied to the area on the base where they had the piece of wood glued on and that stripped. That doesn't mean I won't find more it elsewhere, where I haven't looked closely.

Cleaned up the worm gears and all the small parts related to them and the shafts they ride on, including the roll pins, stop collars, brass bullets that form part of the locking mechanism, and the locking screws.

Chased the threads on the locking screws with a die to clean off the crud and did the same with a tap for the holes in the shafts they screw into.

Drove out the tapered pin that retains the shaft that the motor bracket rides and pivots on in the yoke.

Cleaned tapered pin, shaft and motor mount up, including removing all the contact cement that was on the mount and washed it off in the parts washer.

That leaves the front and rear trunnions and the yoke that connects them together as far as cleaning goes. Those are bolted and roll-pinned together and I really don't see any need to disassemble them. Just give them a bath, clean out the bores, where the shaft for the motor goes and call it good.

A couple of the cleaned up castings:

IMG_2393 copy.jpg

Also got the laminate and t-strip edging removed from the Biesemeyer fence, and got 99% of the contact cement stripped off the underlying Baltic Birch plywood (pic just before I had completed contact cement removal):

IMG_2396 copy.jpg

Plan is face that board with a UHMW sheet. Would prefer to glue it on ... probably with contact cement but sure how well it will adhere. More research needed.

The other aspect of that, is whether I'll be able to zero-out the position indicator on the fence adding that much thickness. Will probably wait to do anything on it until I have the saw all back together.

Did a little better on temperature management last night, kept it down to 80F for the high.

Did remember to move some wood inside before I called it quits so I should be able to get a fire doing fairly easily tonight.

Hope everyone had a great Friday ... (y)
 
   / Good morning!!!! #167,189  
Nasty tornadoes in Midwest. One did lot of damage in AR town where we always stopped to get BBQ when taking the boys for college.

I’ll probably pass drew on I81 tomorrow. His camping spot tomorrow is just north of our lot, which I hope to stop at tomorrow. Son heads back to TN, we are going half way. Going to be windy they say.
 
   / Good morning!!!! #167,190  
The only event on the northbound North Bay trip was a clown that passed me when I had the cruise set at 72 mph. (Roads were dry.) About 5 miles farther up the road I was right on his a$$ so I went out to go around him. He sped up, kept me in the passing lane, but not for long. The V6 3.7 L VVT in the Dodge is pretty peppy, by the time I got off the throttle I was doing 100. Left the clown in my dust.
Got everything done AND my usual full rack of ribs with sweet potato fries and coleslaw. Coming back out of town there were two cops and a meat wagon just south of the Hwy 17 overpass, a pickup decided that the way south was to go up a pile of rocks that hold up the North bound side of the highway. No injuries, the meat wagon left empty. The roads by that time were wet with slushy sections. Didn't stop me from doing 72 most of the way back. No cruise control coming back. I wont use it on wet or snow covered roads.
Emailed my manager this morning and told him about the freezing rain forecasted for this weekend and my thoughts about going down there in it. He replied to do the best I can to get there. Always.
Sunday is looking sunny and 34, Monday in the 40s. I will plow tomorrow about 2 P.M., that will take me until 5 then supper and bed. Early to bed, early to rise makes Billy healthy, wealthy and a prude. :LOL:I will most likely be on the road by about 3 A.M. Sunday morning and in Mississauga (where I get my medical) by 8 A.M.
Medical will take about an hour and then back up to Markham to meet with an old friend, jump into my motel room (without the friend) and off to the first of the two meetings Monday.
I had tried out the ELD (electronic logging device) last year and it put me into violation when I wasn't so I had shut it off and went back to paper. This year I MUST use it (became law on Jan. 1, 2023) so I need to get trained on it.
The only time we can use paper logs (and we must prove the past 14 days) is when the ELD breaks down. I can accommodate that. Just chuck it out the window then drag my trailers over it. Oops it fell. :eek:
This might be my last year of driving big truck, I haven't made up my mind yet. I have been threatening that since I turned 65, but I like it too much. I will definitely be done when I turn 80. DoT/MTO or whatever you want to call those useless butt holes insist on a medical AND a road test in the class of license/vehicle you are applying for (Class A) and that is EVERY year. Screw that.
 
   / Good morning!!!! #167,193  
Coffee is cooling in cup. 46° with clear skies this morning. Heading to 54° with rain off and on during the day. April showers came a day early. Got 1.5" of rain yesterday. House is clean. Son came for his dog. It's back Sassy and me again. Neighbor gave me a motorcycle lift. I works. Just needed a cleaning and handle for moving it around. Got handle made. Need to paint yet. Have to check with neighbor to see if he is available to help change out water pressure tank today.
Still no way to get at bird feeders.
i8Vowa2.jpg


Everyone stay well and safe.

Good Morning All.
 
   / Good morning!!!! #167,194  
good morning all
65 in Columbia sc
this should be an interesting day, driving up through center of SC, NC and then into VA, all on byways with a million turns shown by the gps, and crummy weather to boot. Will simply follow the gps. The main road out of Columbia rt 77 is totally closed due to bridge work, so I have to work my way around the city. Have visions of getting seriously lost. Trying to get out early this morning before rain starts. Might have bit off more than I can chew today, will see if I make it to Roanoke on time for lunch with Buppies. After an 8 hour day yesterday, getting a little worn down.

ok, for sure, sunrise, not sunset. Just checking to see if anyone would notice... ;)
 
   / Good morning!!!! #167,195  
Good Morning!

God has given us another chance to get it right (or at least not screw up too badly).
61.2G and T-storms rolling through for the next hour.

After reviewing the subject for one week, our dog Bailey has an opinion:

E5EE44F1-5392-4573-9366-2C10CFBAC3D6.jpeg


puppy is doing much better, no shots for several days, one small rattle yesterday morning, full of energy (I can only imagine how much energy he would have if he was NOT on the cough syrup with “the good stuff” in it!) and quite adventurous. He is perfectly fine driving in the car, and right now (so far) he is ignoring the thunder (which has not been closer than three miles - we will see what happens in a few minutes).

gotta start on the day, May go in for OT, May not, we will see how we feel after breakfast.

I hope everyone has a happy healthy safe blessed day!
 
Last edited:
   / Good morning!!!! #167,197  
Took over a week for my sons dog and Sassy to decide they could play together. Then Allie went home. Sassy is in major rest time mode.
Bailey started playing a bit yesterday outside with Harry, it will be fine - it was just too good a scene not to photograph and meme 😂🤣😂
 
   / Good morning!!!! #167,198  
Morning all!
36 here going to our first over 60 day this year! Unfortunately it will be raining most of the day.
Got 5 loads of sticks and leaves pulled off of a small area so far! Looks like it will be quite the job this year.
Good news on the wife's endoscopy! No issues found other than the acid reflux we already new about! She was told to continue the meds for 2 more months to check on improvement and we will go from there. Yay!
Working on getting my meds flipped over to our new medicare provider. What a giant pain in the butt switching over this has been!
One of our smoke detectors decided to go crazy yesterday! All this loud beeping can sure make you jump! Looked at the date as we just got them! April 2003. Oops. New ones ordered and due in today. Will change them all tomorrow.
Think I will hang out in the wood shop today.
Hope everyone stays safe and healthy!
 
   / Good morning!!!! #167,199  
57 this morning high in 60s .67 inches of rain yesterday high winds today up to 60mph

two but score thanks and I do over 60 so far. Drew and I seem to have good skin for growing them

cyst on back took 57 minutes installed tube back very sore today

prayers for all silent or spoken our Country
 
   / Good morning!!!! #167,200  
57 this morning high in 60s .67 inches of rain yesterday high winds today up to 60mph

two but score thanks and I do over 60 so far. Drew and I seem to have good skin for growing them

cyst on back took 57 minutes installed tube back very sore today

prayers for all silent or spoken our Country
Feel better - hoping the cleaned it all out!
 

Tractor & Equipment Auctions

2013 ISUZU NPR STAKE BODY TRUCK (A59904)
2013 ISUZU NPR...
2016 MACK CXU613 MID-ROOF SLEEPER (A58214)
2016 MACK CXU613...
2844 (A58376)
2844 (A58376)
RAKE ATTACHMENT FOR MINI EXCAVATOR (A58214)
RAKE ATTACHMENT...
2021 CATERPILLAR 299D3 SKID STEER (A60429)
2021 CATERPILLAR...
UNUSED FUTURE MINI EXCAVATOR WOOD GRAPPLE (A60432)
UNUSED FUTURE MINI...
 
Top