Door opener problem

[RayIN]

New unit will fix the issue.

 

[henrich45]

I have a Chamberlain garage door opener, about 15 years old. The problem is getting it to go down with a remote. I have one remote and one car both programmed for it.

It always goes up and down with the button in the garage. It always goes up with the remotes. It will sometimes go down with either the remote or the car but it’s less than 50% of the time. If I try and lower it with a remote and it doesn’t work it will go down with the button in the garage so I do think it’s the safety eyes.

Getting closer with the remote doesn’t help. I reprogrammed the remote and car, that helped for a day. I also read a CFL or LED can interfere with the signal. I have a regular rough service light bulb in it and taking it out doesn’t help.

Any thoughts? dövüş oyunları apk indir

It sounds like an issue with the safety sensors, which can sometimes be misaligned or dirty, causing intermittent operation. Try cleaning the sensor lenses and ensuring they’re properly aligned. Also, check for any obstructions in the sensor’s line of sight. If the problem persists, the sensors may need replacing.

 

[dodge man]

It sounds like an issue with the safety sensors, which can sometimes be misaligned or dirty, causing intermittent operation. Try cleaning the sensor lenses and ensuring they’re properly aligned. Also, check for any obstructions in the sensor’s line of sight. If the problem persists, the sensors may need replacing.

No that’s not the problem. The problem was diagnosed and the opener replaced.