Do you think it is possible???

   / Do you think it is possible??? #1  

horticattleman

Silver Member
Joined
Mar 28, 2009
Messages
114
Location
South Central Louisiana
Tractor
CT335
I have a tiller for a 425 but have never really used it. Do you think it is possible to convert it to a ditch filler????
 
   / Do you think it is possible??? #2  
Sure. Just replace the tines with left & right hand augers.
 
   / Do you think it is possible??? #3  
Why not just make a V shaped pusher blade and weld it to a QA plate. Shape the blade so it leaves a small mound over the trench. or leave the back of the V open for the hill effect. Could also have a wheel behind the V to compress the dirt into the trench
 
   / Do you think it is possible???
  • Thread Starter
#4  
Why not just make a V shaped pusher blade and weld it to a QA plate. Shape the blade so it leaves a small mound over the trench. or leave the back of the V open for the hill effect. Could also have a wheel behind the V to compress the dirt into the trench

4 steps ahead of you. I have made that already as well as a flat angles one with a shoe and they work pretty well, except in S. Louisiana we have some soils that are very clay type and once the spoil sits exposed for more than a few hours it becomes hard. We use small cultivators to break it up buty its time consuming.

Can I buy just the auger spindles? Guess thats a Kieth question huh?
 
   / Do you think it is possible??? #6  
4 steps ahead of you. I have made that already as well as a flat angles one with a shoe and they work pretty well, except in S. Louisiana we have some soils that are very clay type and once the spoil sits exposed for more than a few hours it becomes hard. We use small cultivators to break it up buty its time consuming.

Can I buy just the auger spindles? Guess thats a Kieth question huh?

I don't know if Keith will be the best resource for that question. He knows his PT parts, but this is a little off the wall.

I've seen such augers in both agricultural and industrial settings. I'd start looking at agri-supply.com and mcmaster.com
 

Tractor & Equipment Auctions

Ford 641 Workmaster (A50514)
Ford 641...
2004 MACK GRANITE CV713 DUMP TRUCK (A51406)
2004 MACK GRANITE...
S Houle WD-10B Pull-Behind Hydraulic Turf Aerator Tractor Attachment (A49461)
S Houle WD-10B...
2020 Kubota Z723KH 48in. Zero Turn Commercial Mower (A50324)
2020 Kubota Z723KH...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
 
Top