Do you think it is possible???

   / Do you think it is possible??? #1  

horticattleman

Silver Member
Joined
Mar 28, 2009
Messages
114
Location
South Central Louisiana
Tractor
CT335
I have a tiller for a 425 but have never really used it. Do you think it is possible to convert it to a ditch filler????
 
   / Do you think it is possible??? #2  
Sure. Just replace the tines with left & right hand augers.
 
   / Do you think it is possible??? #3  
Why not just make a V shaped pusher blade and weld it to a QA plate. Shape the blade so it leaves a small mound over the trench. or leave the back of the V open for the hill effect. Could also have a wheel behind the V to compress the dirt into the trench
 
   / Do you think it is possible???
  • Thread Starter
#4  
Why not just make a V shaped pusher blade and weld it to a QA plate. Shape the blade so it leaves a small mound over the trench. or leave the back of the V open for the hill effect. Could also have a wheel behind the V to compress the dirt into the trench

4 steps ahead of you. I have made that already as well as a flat angles one with a shoe and they work pretty well, except in S. Louisiana we have some soils that are very clay type and once the spoil sits exposed for more than a few hours it becomes hard. We use small cultivators to break it up buty its time consuming.

Can I buy just the auger spindles? Guess thats a Kieth question huh?
 
   / Do you think it is possible??? #6  
4 steps ahead of you. I have made that already as well as a flat angles one with a shoe and they work pretty well, except in S. Louisiana we have some soils that are very clay type and once the spoil sits exposed for more than a few hours it becomes hard. We use small cultivators to break it up buty its time consuming.

Can I buy just the auger spindles? Guess thats a Kieth question huh?

I don't know if Keith will be the best resource for that question. He knows his PT parts, but this is a little off the wall.

I've seen such augers in both agricultural and industrial settings. I'd start looking at agri-supply.com and mcmaster.com
 

Tractor & Equipment Auctions

Payment Terms (MUST READ) (A50774)
Payment Terms...
2011 MACK GU713 DAYCAB (INOPERABLE) (A50854)
2011 MACK GU713...
Kenco PH9000 Self-Leveling Pipe Hook - 9,000 LB Capacity, 8FT Max Pipe Length (A51039)
Kenco PH9000...
John Deere 6410 Loader Tractor (A50514)
John Deere 6410...
1998 FONTAINE TRAILER CO. 48X96 FLATBED (A50854)
1998 FONTAINE...
2019 VOLVO VNL760 TANDEM AXLE SLEEPER (A51219)
2019 VOLVO VNL760...
 
Top