Did Kioti...
- Thread starter Garrabo
- Start date
- Views: 3073
sweettractors
Advertiser
Re: Aerator
I dont think there was as big a market for this machine as the Mfgr origanally thought 5-6 years ago?--I suspect 48 and 60 inch models will be lucky to hang on--Ken Sweet
Sweet Farm Equipment Co *New Pickup Truck Accessories*
I dont think there was as big a market for this machine as the Mfgr origanally thought 5-6 years ago?--I suspect 48 and 60 inch models will be lucky to hang on--Ken Sweet
Sweet Farm Equipment Co *New Pickup Truck Accessories*
TresCrows
Elite Member
Re: Aerator
"I dont think there was as big a market for this machine as the Mfgr origanally thought 5-6 years ago?--I suspect 48 and 60 inch models will be lucky to hang on--Ken Sweet"
Nonetheless, most of the small utility tractors such as the NHTC18 etc, the smaller JDs and the smaller Kubotas like the 2410 and 7500 need a 54. The 48 is to small and the 60 is just to large. That is just how it is so again, when they make a 54 inch brush or field cutter I will study on it /forums/images/graemlins/grin.gif. J
"I dont think there was as big a market for this machine as the Mfgr origanally thought 5-6 years ago?--I suspect 48 and 60 inch models will be lucky to hang on--Ken Sweet"
Nonetheless, most of the small utility tractors such as the NHTC18 etc, the smaller JDs and the smaller Kubotas like the 2410 and 7500 need a 54. The 48 is to small and the 60 is just to large. That is just how it is so again, when they make a 54 inch brush or field cutter I will study on it /forums/images/graemlins/grin.gif. J
sweettractors
Advertiser
Re: Aerator
Depending on the brand? Most of companies that Mfg these type cutters that are called 60 inch only cut about 56-57 after blade clearance is allowed--I do sell a line of cutters that measure 76 across the deck and they call it a 6 ft machine because it cuts 72--Kinda need to know if you are watching width, weight, or actual cut?--Ken Sweet
Sweet Farm Equipment Co *New Truck Accesories and Custom Lettering*
Depending on the brand? Most of companies that Mfg these type cutters that are called 60 inch only cut about 56-57 after blade clearance is allowed--I do sell a line of cutters that measure 76 across the deck and they call it a 6 ft machine because it cuts 72--Kinda need to know if you are watching width, weight, or actual cut?--Ken Sweet
Sweet Farm Equipment Co *New Truck Accesories and Custom Lettering*
HayDR
Veteran Member, Approved Advertiser
Re: Aerator
TresCrows,
Midwest Equipment makes just what you want. It available from CCM with free lift gateservice.
It is a 55" transport width and 52" cut and guess what it available from Midwest direct ship or Kioti dealers. Some Kioti dealers like to sell the low end cutters and do not stock the entire line of Kioti products so they do not admit the 52" cutter is available.
TresCrows,
Midwest Equipment makes just what you want. It available from CCM with free lift gateservice.
It is a 55" transport width and 52" cut and guess what it available from Midwest direct ship or Kioti dealers. Some Kioti dealers like to sell the low end cutters and do not stock the entire line of Kioti products so they do not admit the 52" cutter is available.
TresCrows
Elite Member
Re: Aerator
I guess I should go to their website and see what they have, no hurry.
We have 8 inches of snow so right now a snowblower would be handy, just does not quite snow enough here to warrant the purchase of one--drat /forums/images/graemlins/tongue.gif. J
I guess I should go to their website and see what they have, no hurry.
We have 8 inches of snow so right now a snowblower would be handy, just does not quite snow enough here to warrant the purchase of one--drat /forums/images/graemlins/tongue.gif. J
