Case 1845c hydraulic pump

[damato333]

I have a case 1845c skid steer. I want to know what size pump it has. They came standard with a 16 gpm pump but I know there was an option to put a 30 gpm pump on. I called a case dealer and basically cause the computer didn' tell him pump sizes he didn't look into it any further. The pump is made by danfoss. So I talked to a danfoss dealer. The guy told me there are numbers on the side of the pump that he needs, so he can tell me a size. There are no numbers on the side. Hopefully someone has the same pump and knows the gpms. I'll post a picture of the tag on the pump.

 

[DT86]

Those weren't the numbers he needed?

 

[damato333]

I guess not. On case's part diagrams I can find the pump but they give no gpm. It makes no sense why it is so hard to figure out something so simple.

 

[oldnslo]

My guess is those numbers are OEM specific for Case and as such they are not allowed to provide any details to anyone other than Case.

A flow meter in the line would be a simple check. Is there a hydraulic house in your area that could run a quick check for you?

 

[J_J]

I have a case 1845c skid steer. I want to know what size pump it has. They came standard with a 16 gpm pump but I know there was an option to put a 30 gpm pump on. I called a case dealer and basically cause the computer didn' tell him pump sizes he didn't look into it any further. The pump is made by danfoss. So I talked to a danfoss dealer. The guy told me there are numbers on the side of the pump that he needs, so he can tell me a size. There are no numbers on the side. Hopefully someone has the same pump and knows the gpms. I'll post a picture of the tag on the pump.View attachment 427466

Standard pump is a 16 GPM pump with a 30 GPM pump option.

Measure the flow into a 5 gal bucket.

16 GPM

1 GAL = 3.75 sec

10 sec of flow = 1.6 gal

You say it is a Danfoss pump. May be a after market replacement pump.