Better Brush Forks?

   / Better Brush Forks? #11  
If your tractor will handel it, start with their wide frame: Construction Attachments, CAL, X-Treme Duty Skid Steer, Skidsteer, Wide Frame Brick Fork 1PFWFBF, Universal Skid Steer Quick Attach



pallet_wide_brick.jpg
 
   / Better Brush Forks? #12  
Yep, and if they are the type that uses a ground rod to attach the pork to the carrier, you can put two on the rod and have 4 forks that way.

Aaron Z
Yep, I have Pin Top Forks that go on a round rod:

P6250003.JPG



And the 2" square Block Forks:

P3250012c.jpg



I could combine them on one carrier, but I have a grapple, so have never needed them for brush.
 
   / Better Brush Forks? #14  
It has been a while, but I'll bet I didn't. I'll go back and check. I would feel pretty stupid if that worked, but it wouldn't be the first time.

I would still love to have something that replaces the whole bucket, but since no one has suggested such a product, my guess is that it doesn't exist.

Might be cheaper just to keep it as you have it and buy another bucket.
 
   / Better Brush Forks? #15  
I bought a cheap set of Titan forks ($251 at the time), and then fabbed up some other tines with some junk angle iron I had laying around. They work great! You could bolt your forks onto this platform.
Titan Forks.jpg

Debris Forls welded.jpg

Debris Forks mounted close.jpg

Debris Forks mounted close.jpg

Debris forks Full.jpg
 
   / Better Brush Forks?
  • Thread Starter
#16  
How hard is it to remove a bucket? Is it an unholy torment like trying to remove things from a three-point hitch?
 
   / Better Brush Forks? #17  
Assuming you have a pin on bucket it’s worse than a 3 point implement. The bucket is a pretty sucky mount for forks. I’d weld 2 pieces of channel iron or tubing across the back and put the pin mounts on that.
 
   / Better Brush Forks? #18  
Easy - SSQA (Skid Steer Quick Attach). Lift 2 levers and it's off.
 
   / Better Brush Forks? #19  
Here are Titan clamp-on debris forks.
 
   / Better Brush Forks?
  • Thread Starter
#20  
I better see if I can work those turnbuckles before I go any further. I really think I failed to loosen the nuts. It was last year, so I can't say for sure.
 
 

Tractor & Equipment Auctions

SANY SY75C EXCAVATOR (A51242)
SANY SY75C...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A50322)
2025 Kivel 48in...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
8 DRILL COLLAR (A50854)
8 DRILL COLLAR...
71057 (A49346)
71057 (A49346)
8 DRILL COLLAR (A50854)
8 DRILL COLLAR...
 
Top