B2601 design flaws

[Lilguy]

The 2601 is a good rig. The backhoe is great
for the work I do. The frt loader just seems to be a light weight. I listened to much to my wife痴 concern about size. If I had to do over I would go with a minimum 2650. Loved the L2501 but no mmpto/mower like on the 80痴 Ls.

 

[SDT]

With the right front corner of the bucket touching, the left front corner is almost 2 inches off the ground, that give the double "thunk" when lowering on a hard surface. With the bucket off, the arms are within
Millimeters of each other. So the discrepancy would seem to be in the Quick Attach to bucket hookup.

That's a lot.

Talk to your dealer.

SDT

 

[civilian]

I wouldn't worry about 1/4" myself.

The problem with the 1/4" is the wear bars do not wear evenly. My BX2230's loader bucket and the front snow blower don't sit level. But I haven't verified air pressure. Need to before snow blowing starts. Jon