3x20 Wiring Question

[UnclePaul]

Today I was hooking up my woods DS96 8' pull type rotary mower on my 3720 with cab and i saw 2 wiring plugs with caps on them right by my 3rd service fits. My question is are they or 1 of them for some type of trailer plug? I really like the 8' mower but I would like to put some flashing lights on it. For the few times i don't get done before dark.:laughing:

 

[kennyd]

I believe they are for the work lights, they should be powered from the headlight switch...got a voltmeter?

 

[Acolar]

One of them maybe for the Backup Alarm (H2)
check wire colors backup alarm should be be a 2-way connector with orange and black wires.

 

[Rob-D]

I think you're both right, back up alarm and work lights.

Rob

 

[kennyd]

I think you're both right, back up alarm and work lights.

Rob

That's why I asked if he had a voltmeter...

 

[Rob-D]

That's why I asked if he had a voltmeter...

There you go Kenny. That's the way to do it.

 

[UnclePaul]

Thanks guys I have been busy the last two nights and have not had a chance to check them with a test light yet.

 

[Nuru]

Today I was hooking up my woods DS96 8' pull type rotary mower on my 3720 with cab and i saw 2 wiring plugs with caps on them right by my 3rd service fits. My question is are they or 1 of them for some type of trailer plug? I really like the 8' mower but I would like to put some flashing lights on it. For the few times i don't get done before dark.:laughing:

The plug drop for the back-up alarm is on the left side. I think the plug drops you are seeing are for the rear work lights

 

[Rob-D]

If I remember the work lights are one black and one purple wire.

Rob

 

[anojones]

I used these on my 3320 to wire up some front lights attached to my sun shade. I just bought the lights and wire at a hardware store, the drop is wired to the headlight switch, now I have lights that are not blocked by the FEL.