cab

Hello, I have a TN55s (cab) model. The ROPS have at least a couple of these connectors. Mine is a 99 or 2000 (first year - can't remember which it is). FWIW. I want to use my aux connections (in this case, for a 12v diesel pump/tank). The load is rated at 22 amps. The operators manual...

Thinking of buying a John Deere 4052 R with a cab. I’ve always had open station tractors but I’m getting tired of fighting the cold when moving snow in the winter and fighting the heat of summer when mowing. Anyone have any insight? Pros and cons? Storage is no problem as I have three 10 foot...

Just thought you all should know, www.Covermytractor.com is having sales: Copied from their Facebook page: SPOOKY SALES!! (For us, NOT you) Save by ordering your soft cab TODAY!! Current lead time is 2 - 3 weeks. If you wait too long, you won't have a cab for winter. John Deere, Kubota, Kioti...

2660 tractor built by TYM with a Mahandra engine with auto shuttle control , originally I didn’t like the auto shuttle but have always liked the shuttle trans but as I have 75 hrs use on the tractor now and getting used to the auto shuttle I’m liking it now also loving the tractor comfort and...

I'm old enough to remember trucks without AC, quarter panel windows, and floor board vents. It was hot, and loud, but there was a ton of air flow. Fans where a thing then too. You could aim them at the windshield for defrosting or on your face to cool you. My Kioti CK3510 cab has AC. But...

Though yall might find this interesting

Anyone know what this recessed "Notch" is for in the L6060 cab headliner? Just decorative or does it serve a purpose?

I'm struggling to find the part number for the rear wiper kit for a NS6010 Cab. Can someone help me with a part number and link to where I can buy the kit?

Any aftermarket sources for cab glass? 3550. I don't think that cab is the same as anything else other than the 3540. And I don't think Mahindra made this tractor under any other name. Right door shattered. Not my fault. Was having it tinted. Just wondering if there are any options other...

Had a run-in with sapling on my 2665. Mashed the ft left signal. Got a new one. Rather than a simple plug at the back of the lamp assy, I get a 3 foot longish cord with bullet connectors. looks like it comes across that front frame piece that separates the upper and lower front glass. It's...

I’m looking for a ‘not too big not too expensive’ broadcast seeder which can be run from inside a cab. I’m torn between ‘going bigger’ for fertilizer as well vs staying small and just using it for over seeding. I also have a Kubota UTV and I’ve thought about just sticking with it and getting...

Decide to go with a new M5-091 for mowing my horse pastures. snow blowing, hay making. Keeping my L6060 for loader work, roto tilling ect. Looked over red, green, and blue tractors but liked the orange the best and getting a good deal. Added air ride seat, 3 remotes, Goodyear radials, buddy...

Comments? Thanks

Was doing some flail mowing today and the tractor acted like it bogged down and almost shut off, thought I may have the mower too low so raised it a little and the tractor caught back up. Started back to mowing and about 20 minutes later it bogged down again and completely shut off. It almost...

SOLD SOLD SOLD Kubota 4wd L3560LE Cab Tractor Kubota LA805 Loader with Kubota bucket Deluxe 3pt arms Shed kept A/C works great, heat does too Loaded R4 tires (no paved roads) 3rd function valve Expanded steel over grill guard SSQA front loader *Cruise control *Side mirrors *Front cab lights...

I went to Dixie Horse and Mule close to Dothan, Al he had a new 2025 Cab model for $37,000 with Hydrostat $36,000 shuttle I wanted to add hydraulic top link add $350 and 3rd function $1000 no sales tax as I am not in Alabama says it has lifetime warranty on drivetrain and standard factory...

I went to the dealership and sat in a new 4075 with a snow cab. It is a beautiful tractor but I felt cramped and uncomfortable. The pedals were to close and the seat would not go back any farther. I'm only 5'8 tall and not overweight. don't see how a large person could fit.

After selling my Typhon Mark X (1-ton gas powered) mini Ex 3 weeks ago I ordered in a new 2-ton rated XVII with the Kubota diesel D902 in it from Ebay Seller MachineryUSA. I offered $11,599 and it was accepted. The total price with tax was $12,435.93 (includes my bank wire fee of $25). The deal...

Afternoon everyone, Working to diagnose an AC issue, does anyone have the system specs for the HVAC pressures/temps? Thank you!

Giving serious thought to replacing my JD 4110 (2005, owned since new) with a CX2510. I'm looking for better ergonomics, better comfort, etc. More power/performance is not a consideration. I was leaning towards the JD 2025R until I found out that the CX2510 cab has AC (2025R cab only has...

Over the years, it seemed like it was getting harder and harder to get a clean (no soot or engine clanging sounds) when starting my tractor when engine was cold. I was running 2 glow plug time sessions which helped, but lately that wasnt enough. I finally got off my lasy butt and traced down...

Thanks to all the help since 2016 when I began here. Please help me make a 30 year decision between these two. The Kubota dealer I’m working with is a bit of a dick salesman which led me to look at Kioti and the dealer owner I’m working with is great- gave me his personal cell. Such a hard...

Hey everyone — I’m in the final stages of choosing a new compact utility tractor and seriously considering the Kioti NS6010 HST Cab over the Kubota MX5400 HSTC. I’ve test-driven both, gathered quotes, and dug deep into specs and ownership costs — but would really appreciate real-world feedback...

hey guys Can someone share the process to remove the cab off the frame on a 2004 TV145? I would like to swap out all the hydraulic hoses underneath the cab

Does anyone have experience with Curtis tractor cabs? I've been 3pth hitch snow blowing with my Mahindra 5155 for a couple years now and love my tractor but it get's very cold and wet moving snow and I am in my 70ies and plan to be moving snow for many more years..hopefully! I know I could have...

I’m closing in on a decision between the Kubota MX5400HSTC and MX6000HSTC—both cab models with loaders—and I’d really appreciate some feedback from those who’ve owned or operated either one. My Use Case Property: 30+ acres with a mix of field, yard, and some woods Jobs: grading 1,000’ gravel...

$67,500 YEAR: 2023 Hours: 117 (not even broken in yet) 62 HP 4WD HST-Plus Hydrostatic Trans. Deluxe Cab w/ Heat & Air with AM/FM Bluetooth Stereo Located in Somerville, TX 77879 Comes with: Kubota LA1055-H.D. Front Loader w/skid steer quick attach bucket, Grill Guard Land Pride...

I am looking to purchase a new MX6000 Cab, and my dealer seems to be doing ok on price, but not very helpful in optioning out or just general assistance in options. So I have a few questions. I need the third function for a grapple, but I am not completely sure on what rear remotes to get. He...

Looking for a roof for a Mahindra 2665. The 6010 model also uses the same part number, 14527072204MR

1999 New Holland TN55S 4X4 Cab Tractor w/Super Steer Working Heat and Air Conditioning Iveco 8035 diesel (Pre-emission) 3-cylinder liquid-cooled engine [53 Horse Power Gross-50 Net] Only 2260 hours. 8x8 Transmission W/ LH Power Reverser(No clutching required for F to R changes.) New Holland...

I've been bush hogging with a 2440 for 25 years. I always wear high quality ear muffs, but the tractor is still loud as hell. To avoid any further hearing damage, I would like to find an 80-100 hp (at pto), JD tractor with a really quiet cab, with regard to engine and transmission noise. My...

Hey all, I've been using these forms for a while, but I'm a new member, checking to see if anybody has a New Holland TC45DA, for or a t2320 for sale that they would be looking to part with, I haven't had much luck being around when they come up for sale at auction, seems like they go for sale...

Adjusting shuttle response not on top dial rabbit and tortoise but the 3 adjustment knobs below, i cant get the response i want with the top adjustment knob and wanted to see if anyone knows the procedure to decrease the slamming into gear as you move from reverse to forward Top knob all the way...

Im struggling to find aftermarket cab for my mf1533 up in canada. Local place (tektite) makes cabs for 1734e and I'm wondering how much difference there is between both tractors. Wondering if I could make the 1734e cab work on the my 1533. I do have ability to do some modifications.

I have a Bobcat CT450 tractor which is re-badged Kioti DK45SE and need to replace the outside mirrors which are de-laminating and becoming somewhat useless. When I attempt to find the part (see attached photo) I keep getting the infamous "no longer available" note. Not surprising since I had a...

Am I crazy for thinking I'll be fine wearing a motorcycle helmet while using this on the front of my mx 5200? We have the 6' wide version and a pto hydraulic pump and typically I use it with a cab tractor... But motorcycle helmet and maybe a heavy chest rig set up and I feel like this would be...

I have a 2008 CK35HST with a rear mount 72" snowblower. Has anyone installed one of those aftermarket vinyl cabs? They seem to be quite pricey for what they are, but staying out of the manufactured blizzard while snowblowing would be nice. Also wondering how much of a PIA it is to install and...

Green guy potentially switching. Stopped by a local kioti dealer yesterday and looked at the DK and NS. Deciding on the NS due to size. Anyone with an NS care to chime in on things to either add right away down the road? Also researching I didn't really find much on the NS I'm guessing cause...

Save $8000 and build your own tractor cab. I built this for about $500.00. I have a new L2502 Kubota. Here in Canada the cab is $8000 so I built my own for $500. It is a very function strong cab if I do say so myself. DIY tractor cab.

I haven't been on this forum in years. My last tractor was one of those grey import Vietnamese used Yanmar units. I loved that thing and used it well on my one acre dirt property in Mesa AZ. I had sold it 10 years ago for a bobcat MT85 skid steer since I mainly used it for trenching and...

I couldn't be happy with my new/used 3010 tractor as it is. I had a cab on my IH 706 and loved having the protection from rain, cold and wind. I found a used factory cab off of a 3930 in Anderson Ohio and had it shipped to St Louis. The tractor had a shuttle shift ( I think ) and I have a...

Hey I have a 7 year old Kubota L3301 tractor that we had a mobile mechanic come out to replace the clutch. Long story short, they have now billed my credit card for $10k and the tractor is still grinding like it was when we called them for the repair. This is a repair that Kubota quoted us $3200...

Anyone mount a round baler control box in an M7060 cab? Been looking at either door post clamps or magnetic mounts, looking to see what others have done. Also planning to power it with the 25 AMP plug in the cab versus running direct from the battery. Had the control box on open tractors...

Hi all, I have a 2011 BobCat CT-450 with cab (the patched over Kioti DK50 that BobCat sold from 2008-2013). Can't get a response form the fan to get cab heat even though there is power to the heater/AC console on the ceiling of the tractor. The AC light comes on but that's it. I want to go...

The interior cab light in my 2008 S185 skid steer quit working for the first time since I have owned the machine. Using a flashlight to take the covering off the light and remove the bulb (Here at almost 60 degrees N. everything requires a light right now no matter the time of day unless it's...

It's been a great tractor for 7 years, Suddenly it kept falling out of forward, also if I touched the brakes it would die and lose all power for 30 minutes to hours and suddenly all power would come back on, If I turned on the headlights it instantly dies and loses all power for hours to days...

I am close to purchase of the DK5320 model. Use will be pulling a 6 ft bushhog, moving dirt and gravel with FEL and work on gravel driveway with ABI TR3 rake. I was interested in the NS and NX kioti models but it seems the NX is being discontinued and I heard it has some trans. issues. The NS...

I have a 2022 Mahindra 2660 built by TYM with one rear remote and i would like to add another to have two remotes anyone have any idea where i could try to find the factory type remotes for a cab tractor. Wondering if maybe TYM might fit. I have tried on google nothing so far in stock.

Hello, Does anyone know where I can get a cab to fit my 2810? Thanks

I decided to upgrade my overhead work lights for the winter snow plowing season. I installed the rears and they work great. When I hooked up the fronts and tested I herd a pop sound then they went out. To trouble shoot I swapped the switches to be sure the front switch didn't go bad. The...

Looking for led lighting options for my nx6010. will use for snowbowing and want to upgrade to LED front and rear. Any help would be greatly appreciated. Thanks

Is the air seat worth the extra cost on M7060 cab model? I know the price difference (few hundred) and I understand the actual seat is the same and just the suspension is switched out. Mainly haying use (4-8 MPH travel speed) and road work.

I want to add LED work lights to back of the top of my 7320 cab, but last year when I opened the top of the cab, it looked like there was a large plastic piece that covered the whole space and didn't allow me access to get to the bolts of the OEM lights. To me, it looked like I would have to...

Got to put my new larger tractor to work this weekend. Thanks to hurricane Helene we had around 50 trees of various sizes down. Got about 30 of them cleared which opened up our roads, but still have the remaining ones to go. Many of them are larger and will require sawing, but I’m not wasting...

I have a 2018 CK3510 SE with factory cab. I'm searching online, and everything that comes up is a different style. I am having no luck finding it in the manual either. Is there a resource on the internet, or does someone have a part number I can use to look up/buy?

Is it just the 4 visible bolts holding the roof on the 2600 series models? I want to upgrade the work lights on my 2665 to LEDs, and the connectors are inside the headliner in the cab. Roof removal seems the easiest. I see 2 up front and 2 more in the middle of the cab, just forward of the cab...

Everything I have has a cab. This is just one of the many reasons. Are you a cab, or open station type?

New member, but I can see how a forum like this can be super helpful to everyone! So here is my question: My Mahindra 6110 cab tractor has an electric fuel pump just a short distance from the fuel tank that pushes fuel up to the higher filter assembly. I just had to replace it and when I turn...

Hello! Ford New Holland 6810 (should be similar to 7210). Pictured: The fuel line is the small one the left. My fuel return line is dripping and I want to replace it. It is located at the top of the tank under the cab. I can barely get a single hand in there, so I am not confident that if I was...

Hey folks, it's been a long time since I posted anything here. 4 years ago, we moved to the coast and sold our house on 37 acres about 100 miles inland. We are now considering moving back and looking at acreage. Most of the places we're looking at seem to be setup for horses, so lots of open...

As I get deeper into this farming thing, I’m adding more powered equipment in the cab. I have a nav system, camera system, bail thrower controller, and now a hay preservative system. Everything takes power, and I don’t want a rats nest of power leads coming from the battery into the cab. How...

Bought my 2538 HST CAB new in Dec. 2016 - on our weekend ranch (garaged) so gets very little use, so only have 110 hours I noted the other day. While changing the battery last Dec (2023) l noticed the A/C belt was shredded/gone, which explains why the A/C was not working. Since its not an easy...

22 Kioti CK 2610se HST cab 650hrs Pedals have been sticking forward and reverse for several months. I’ve been under there looking for any issue but couldn’t find anything. Yesterday both pedals dropped to the floor and I noticed the linkage was off. One of the pins appeared to shear off so I...

We're looking at getting the LX3520HSDC Deluxe Cab machine. I am curious if anyone here has any field experience with one, or owns one themselves? Something I am curious on is the "suspension seat". It is not listed as "air ride", but is "adjustable". Can anyone offer any thoughts on how it...

Hello, Doing some shopping for a 5M series and found a 5100M standard and 5115M premium cab pair of tractors - I haven't seen them in person yet and have been unable to find good documentation online about the differences. It looks like the buddy seat can be added to the standard cab, and there...

So outside temps are rising. Hopped into my T474 shuttle shift cab and turned on the AC. AC light didn't light and no blower. No power to any controls or radio. WTF! 2yrs old and 83hrs. Checked fuses under the hood and dash fuses-all ok and have power to them. Waited for Monday to roll around...

I have a 2565 that I purchased in 2018. The ac has stopped blowing cold and it is absolutely miserable in the cab in this heat. I went to add some freon to it, but my gauge won't fit the ports. There are no threads on the outside of the fittings, just a radiused groove. From what I have been...

I think I’ve narrowed it down to two tractors that I’m pretty set on. I have 7 acres of land that we are clearing a large portion of and developing and going to be building two homes, a shop and a pond. Possibly some paid bush hogging services on the side for extra cash. I live in south...

Looking for something in the 40 to 50 horsepower range, four wheel drive with a cab and preferably a shuttle shift not a hydro and under 10,000 lb with fluid in the rears. Had a tractor for many years and traded it for a skid steer 6 years ago but due to health issues I have a hard time getting...

I’m curious. Has anyone here put a GMRS RADIO in your tractor cab? We are fairly mountainous. And cell coverage is not so good… so I’ve considered it… Thanks.

I have a New Holland Workmaster 55 with cab. I periodically blow out the cab pleated air filters with compressed air after knocking them on one the tires. Are there other tricks I can use to extend the effectiveness of these filters. The damn things are expensive! Thanks!

I have a 471 with cab that has the cab air filter on the outside of the cab on the RH side. I hit a low hanging tree branch and broke the top of the cover. Called my local MF dealer she could not find the part #, she said I will get back to you. When she did call back it was all bad news for me...

Asked by a guy who definitely did not just shatter the left door of his New Holland PowerStar by flexing it too hard backwards against the hinges. 🙄 I think I've learned the hard way that I don't like any design that bolts the hinges directly onto unsupported glass, especially when it's the...

Last fall, with a snow storm looming I figured I'd swap out the work lights on the top of the cab to LED's, but upon opening up the top of the cab, I noticed there was a 2nd skin that didn't allow me access to the bolts that the light brackets attach to the tractor with. Not having a barn or...

Nice tractor upgraded to a 95hp for farming Well maintained 900 hrs hydrostat, aftermarket led lights, AC, heat, blue tooth with Kioti backhoe 18" and 12" buckets 2 remotes 3rd function WR long kit for grapple etc loaded ag tires Titan tires great shape stance is set wide 82.5"

Hello, I have a 2012 DK45 CHSE (CAB Tractor). I am trying to get a 2nd set of remotes for the rear. I currently have one set of detent remotes. Kioti has discontinued there remote kit for my tractor. A kioti dealer said they could order most of the parts individually, adding up to over...

My pto spring broke and I’m pretty sure the only way to access it is to remove the entire ride side console that covers everything. Is there an easier way ? Is it as big of a PITA as it looks? Assuming all the plastic caps are going to need to be replaced afterwards. Right now I have a big...

Is Summit coming out with a cab version?

Going to post this thread here and in the Massey Ferguson section to see if anyone had compared these MF 2850M/2860M Deluxe Cab vs Yanmar YT347/359 Cab in their search for a new compact tractor? I went and sat/test drove the MF 2850M and I really liked it. I have read and heard good things about...

Going to post this thread here and in the Yanmar section to see if anyone had compared these MF 2850M/2860M Deluxe Cab vs Yanmar YT347/359 Cab in their search for a new compact tractor? I went and sat/test drove the MF 2850M and I really liked it. I have read and heard good things about the...

So, after years of research and test driving tractors, I finally pulled the trigger on a new tractor. This was a tough decision for me and and I went through a lot of stress and shopping to get to this purchase. There is not a lot of information out there for the Massey 2860M and I want to share...

I made a cab, grill, push plow and weight box for my Summit tractor. I have 43 hours on the tractor.

I love my cab - mostly when it is hot/cold/dusty/raining or snowing - but I am getting tired of having to frequently stop, open the door, lean out to realign my side mirrors, which are constantly knocked out of skew by limbs and brush. Has anyone here had success in mounting a rear view video...

Has anyone tried putting a cab from an rtv1100 on an rtv900 both being the same 2007 years? I know the hoods are different but can’t tell if any other measurements are similar or what mods it might take. I have a chance to buy an rtv1100 factory cab off a salvage one for under $1000. Thanks...

When comparing same model tractors except one with a cab, will the cab hurt performance on HP or will it help with added weight?

Did kubota make an MX5100 with a cab? I haven't come across any in my searches.... Thanks!

Im looking at a 2008 Case IH Farmall 31 tractor with loader cab and belly mower, owner says it has around 400 hours and runs fine. Its been sitting for sometime outside and currently the battery is dead and owner claims he hasn’t had time to use it and is looking to sell. Wondering if anyone has...

Kioti 2022 CK3510HSE Cab. Perfect condition. 53 hours. KL4030C Loader, 3rd Function Valve installed. Air Conditioned Cab. Hydrostat with 3 ranges, 4x4. 5 foot Titan Brush Cutter included. Priced to sell. $28,000

Does anyone on here own one of these? Do you like the shuttle shift on the left by the seat? I dont find many reviews on this type of tractor.

I am needing to re-create this decal for someone, Does any one have a good photo of the missing bits? Thanks, Bill

I was a kubota guy my whole life. I currently own a septic business and we use my U-35 mini excavator a lot and love it. I just purchased a 50-acre farm on a foreclosure. Never thought I would be going Kioti but more bang for the $, more features and more power. I am paying cash for my new...

The manual says: KUBOTA SUPER UDT-2 SAE 80-SAE 90 gear oil Why specify 2 options? From what I've read it ships with UDT. Recommendations? I'm looking at buying the AMSOIL SEVERE GEAR® 80W-90 100% Synthetic Gear Lube for it.

Hello again, As I get closer to purchasing a new tractor, I am still struggling with getting a Cab. I have always been in an open station and feel a little enclosed when testing tractors with a Cab. I am 46 and not getting any younger (starting to feel it more). I want this next tractor...

Hi All, I’ve lurked around on this forum for quite some time, but the realistic possibility of being a tractor owner within the month prompted me to join and get some insight, and hopefully reinforce my thought process. We moved onto 26 acres nearly three years ago now, but officially bought...

I'm looking to add a backhoe attachment to my 2655,and have found a couple 65B units nearby. I'm told the 65B will fit my tractor, but the Mahindra site doesn't list my model anywhere in reference to compatible backhoes. Does anyone know if this unit will fit? Also, where would I go to find the...

Probably not the most apples to apples comparison but I have been looking at new tractors for a couple of years now and getting closer to pulling that trigger. I have looked at and drove most fo the current brands out there. LS was far from my list of tractors when this started. However, there...

L3560HSTC Limited Edition. I had the dealer install the light kit and a third function valve (and they installed the radio even though I didn't ask for it). I noticed this little guy sticking out of the plastic above my left rear wheel (My Left if I'm sitting in the seat). What's it for? I know...

Hey all - I recently bought an L3560 with a cab. I've got a pretty hilly property and I've been using the tractor with a Brush Hog to clear out some of the overgrown sections. It's my first cabbed tractor and I'm struggling with figuring out if I'm within the "danger zone" in some sections or if...

Good morning- I recently purchased a used JoDale Perry cab for my 2305. I’m wondering if anyone has the install/owners manual for this specific model? I found the JDP general operators manual, but specific to the 2305. Thank you in advance, Brian

Hello everyone I'm sort of a tractor newbie. I purchased a Ford 5000 about 3 years ago. I love the tractor but if I knew now I would have searched for a cab tractor. I have been searching with no luck for a cab either oem or aftermarket for this tractor. I'm looking to the knowledge here for any...

Bliss! If anyone else is sick of their crappy OEM Kubota seats with no suspension I've found a relatively painless upgrade that will work for your M59/M62 I took the plunge and ordered the Kubota "L6026" air suspension seat made for the L6060 cab tractor and found that it fits with very little...

Happy New year everybody! I got to spend the second day of the new year on my tractor moving snow while it was around 0 degrees Fahrenheit IN A CAB! I bought this cab before Original Tractor cab released their dedicated BX23s cab design so I had to improvise on a couple of steps to make it...

I just picked up my L3560 Grand L cab unit yesterday and it has the speakers and the blank cover over the hole for the stereo. I would like to add a Pioneer head unit to it, and the question is what do I need to buy besides just the head unit? I assume that I need a wire harness kit to tie into...

The right side axle bearing failed allowing the pinion to ring gear mesh to change and wipe a couple teeth from the ring/bull gear on the 2018 B2650. So while the dealer has it under warranty getting a newcomplete set of right side parts loaded, I decided to take trade value (always leans...

I have an 1835MHC that I bought this past spring. It is used 80% of the time for mowing. I generally leave the loader off for easier trimming next to objects and only attach it when I need it. I have noticed that with the loader installed that my power steering loses quite a bit of power...