Search results

BY ALL MEANS, AVOID BRENSON!!!!!!!!!!!!!!!!!!!!!!!!!!

This one is easier to use: A tree cutter

You know you are old when you read this thread everyday

Why? to make her squeal, some men love it ;)

A waitress Like this would serve you well.

Ha???

You don't know for what it was sold, the only thing you know is how much it was asked for. Questionable value of information, and i'd say a misleading info. A simple example: XYZ market value is $100. A seller decided to ask $300. It was sitting on the market forever. Than Kennyd being an...

two notes so far 1. shouldn't "sold" be deleted/disappear/archived? 2. There are 30plus pages of items, but looking on the left side it shoes only 1 tractor and zero other items. do i misread something?

No worries, he will be back under different face/nickname

$25-$40 on craigslist ot facebook marketplace will do the same, only better https://www.ibctanks.com/

$17 http://www.sgammo.com/product/30-30-ammo/20-round-box-30-30-win-150-grain-flat-nose-soft-point-sellier-bellot-hunting-ammo https://ammoseek.com/ammo/30-30-winchester

If nicotine doesn't have any negative effects interesting to know the statistics what percentage of smoking ppl live over 80yo vs ones who never smoked. The fact that one lives longer does not make any stat, just exception.

Wow, do you have names ?

i have great experience with those, one pair i installed on my duck boat, another on my pontoon, another on my motorcycle. Cheap and extremely powerful. There are many variations of them on Amazon/ here is the link : LINK I have no affiliations with them, just a happy customer.

For over 15 years I use OOMA. $120 equpement from Costco or anywhere else and about $5 monthly payment. Caller ID, no limits, free calls to many countries. In my woods I have a very bad internet, 15mbps on a good day. Never had any problems with the phone. Even more, up to last year we had...

100% agree,

I think it depends on the area, when I was living in SFBA the CL was the thing and i never heard of FBMP, i even did not have FB account but when i moved to KY, no one heard of CL, everything is FBMP.

For damaged cruser?

1. Don't worry, you paid for this pit. 2. The tractor driver probably was not too happy as well, but who knows 😉

This cop has balls the size of footballs:unsure:

https://www.vevor.com/tractor-bucket-protector-c_10963/vevor-2pcs-tractor-bucket-protector-ski-edge-tamer-protector-snow-removal-orange-p_010882069857

Amazon.com

Waste of product, it goes much better on a slice of sour bread and shot of cold vodka.

Looking at the operator no wander you fell in love... looks really tempting, go for it, forget the backhoe ;)

Sounds interesting, go for it

Guys on this forum might be able to help you with correct dimentions Bolens G274

A boxer would fit your bill. I have experience with them. My last one white was exceptionally good.

Buy a branson or TYM and remove all this bs. Plenty of info how. Too bad I did not know it before.

Tramp's fault

Today my dealer brought his mechanic with an inspection camera. Mechanic looked inside and the leak is well above the 4wd shaft. They want to split the tractor next week. It is going to be the second split of my tractor in less than 300hour total time. Last time it was split at 80 hour mark

OK, I see. Asked because I thought about it for the tractor and my utv, and while making research most ppl recommend an additional battery installed in parallel. looks sharp BTW.

Do you take the power from the tractor battery or you installed additional somewhere?

Yes, I opened it before writing, and I saw the seal holder, but I'm not sure this is the problem because as much as I can see everything in the bell housing is covered with oil. The dealer going to bring his mechanic with a camera. I hope it is this #5&#6.

I think the #5 or #6 or both are the problem, not the front diff seal.

Just found the time too look in to it. Opened the bell /shroud of the coupler closest to the front deferential. Everything is as dry as a bone, so, the leak is not from the front deferential seal. Any thoughts?

Make a counter offer to both of them, 55%+75=130%. ;)

Could a neighbor poison him? If yes, your wife will never find anything because the dog ate everything. Unfortunately some neighbors are very capable. Or probably a poisoned rat. Anyways, if it is poison you won't find it because it is eaten already

Nowadays you never know who makes what. I recently bought a JUKI Serger for my wife. It was supposed to be 100% Japan made machine. So was stared in the living, on the box, insulation ad so on. Only on the bottom of the box was a little peace of paper. Quality control sort signed by Tran...

Since I moved to W KY, it happened every time, now I decided if I can't do it myself lot it rote.... And there is catch 22, the ones who are good or even average, not avaliable till the next century, but if someone is available right away or the next week means they are real bad ones.

I have tubbed tires. Pumped up to 37PSI they hardly can handle the weight of the loader, and when i turn right or left it is pain to watch 🤣 i'd install wheels made for brush cutters if i saw any future in this project. So far for what little needs i have in a front mounted brush cutter, i'm...

No problem, maybe someone from the US can chaim in, tho it says made in Korea and all bolts are metric, i'm sure it made in China with Korean labels because the zikrs they use have somekind of the thread used only in China.

Thanks, while you were typing it i found it on my comp. sorry, i'm too old to remember my name, let alone some manual downloaded 15 times in to my "download" folder Yes, it is an easy one, i'll order the seal and do it. Tired of spotted floor in my barn. BTW, maybe you know the thread of the...

To pull the shaft I need to remove 5he front end, right! Do you have a link to manual?

Wanted to ask, how difficult to replace this front diff seal? Any ideas?

Crain does not drink beer

It is my thought also but I don't have one to try. Anyway, it is useful for some applications, especially when the brush is really thick, I was lifting it high and slowly letting it down, work slow but efficiently. Also cleaned banks of my ponds. Worked well without getting my ZT stuck...

There is no exposure because it completely enclosed by metal skirt on the sides and the back and rubber skirt on the front. not like a regular brush cutter, everything is falling down.

This is the flow with my design, it has only original pneumatic wheels, they are not pivoting and they are on the side, so, they cannot hold the weight of the FEL and they tend to run off the rims when i turn because it sways too much. Another point is, on flat ground it would work well, but if...

I think it is the same approach as i did.

way to go, order one ;)🤣

It rans buy 4 cycle motor, the 3rd function flow is usually not enough to spin the blades tho i read somewhere there is a company makes them for FFL. Maybe this https://www.ironcraftusa.com/x-treme-duty-direct-drive-brush-cutter/

It is a gas engine, you cannot tilt it too much hence deprive it from oil. Remember, it is a poor men's brush cutter, not a reach men front attached flail mower.

I had a swisher brush cutter sitting in my barn. It is a good thing, but it is hard to use in tight places or where the brush is very thick. So, made some improvements. I had a patch 20x50 yards of really thick bushes which i did not had courage to approach. Today i did it!!! This is after...

Not anymore ;)

Here is what I done to my Branson today : 🤣 :mad:

Yes I asked about parts themselves. Too bad it is impossible to buy them online

Were are you guys getting parts besides the dealer?

Great tip, I always struggle with the tank while fueling and completely forgot about this hook. Thanks for the reminder :)

Indeed, at first I thought it was really high, then I spent 2 hours looking for cheaper. The cheapest one I found was $785 plus $35 shipping plus tax. Here was 700 no tax(I have AG exempt), no shipping, just 15 minutes drive each way.

Yes, a two spool kit OEM from Branson/TYM. From my dealer. $700 OTD

Probably, but all those discussions do not prove you are right and the guy is a cheat, it is only personal opinions. besides my experience is exactly the same, only without exact numbers, i tried kioti, kubota and branson side by side and I felt significant difference in performance, BUT THE...

You know exactly which part. The one I left in your comment, the part that you insist the guy is cheating. So, how do you know?

Just curious, how do you know?

He did not ask for experience nor opinions, he asked about the difference, an it was answered already. And if he want to see performance difference, this is a good start. BTW. my experience the same

He actually asked what was the difference between the H and R, not what tractor to buy. I tried both, for me it is a day and night, it is why I have what I have ;)

I just moved here 2 years ago, i have 60 acres of land very far from any civilization, see any human ones a week the most, love it here and i don't care how much they weight since i do not have to lift them. Let them be, free country. I see through them and don't notice, but when i finally see...

See post#4 they use same filters. According to the specs the TG3985 has the best filtration

Installed OEM rear remotes and hydraulic top link. now waiting for the hydraulic side link to arrive.

Not for this guy, he is soon full of it, no amount of compression would hurt him

Interesting if the main was also leaking or they changed it just incase.

So, they changed both crankshaft seals. Interesting why they changed the front one. I guess they know something, otherwise the company would not pay for it. Just a guess.

I have 2 types of ibc totes, one is 275 gallon. My tractor can lift it even with green wood overloaded to the top of the triangle cover. Another is 330 gallon, my tractor hardly can lift it with the green wood filled to the top of the cage. But when it filled to the top of the cover and dries...

I have Branson 2515 with BH150 backhoe. It is a subframe model. The question is, when i attach the backhoe, should i extend the top link so it pushes on the backhoe or should i shorten it, so it pulls the BH towards the tractor. To keep it lose, the BH has too much play and jumps around, feels...

Everything else is dry as a bone, when i opened the weep plate, it was wet inside with oil. Where it came otherwise? I looked around, no other signs of leaking oil. What is more interesting, it was leaking for 3 days, then it stopped for sometime, then started again. Now there is no new spots...

I guess it was discussed and there are many designs, but for some reason i could not find where to put it. Just wanted to share my design with was easy to make and works very well for over 8 month already and countless cords of wood.

I had a couple of trees fallen in the storm. My daughter volunteered to help me to do the most difficult part 🤣

Here is my solution, extremely easy to use. When i need it, i just bring it close to the back door of the house. Some of them i got for free, some for $20 The 275Gallon ones is enough for 3 weeks, the 330 gallon i don't know yet, i just loaded them this summer. They are 2025 stock.

Spent about 20 minutes today and $13 on Fan installation. I know it is a child's game but it is what i was doing before splitting some wood. Connected to the running lights harness (rear running lights went to my "I'll give it to the buyer when i sell it" pile on the next day after delivery)...

Are they connected that it comes out of the bell housing? And i think the gear oil W80 is not red, is it?

I thought 2515 has only motor oil and transmision/gydraulic oils, am i wrong again?

I want 25hp tractor. If I wanted more hp, I'd buy 85hp or more.

Why do you think this is the input shaft and not the camshaft rear seal? BTW, on my tractor they changed everything on 180H mark because the through barring was bad, actually the sleeve of the barring had smaller OD and the bearing made loud rattling/chattering nose when the clutch pedal was...

Just saw your post. Last week I found spots under my tractor. It is a little over 200 hours. Exactly as yours. Coming out of the weep hole. Mine for some reason looks reddish, not black as the motor oil, not transparent as transmission. I haven't spoken with the dealer yet. Letting him get...

CA

Why would I bother if I know Didge Man is in the area. Wink, wink

Yes, I dropped this project for the time being. Next year I'll rent a jackhammer and fix it. Unfortunately in west KY, if you want to get something right or done at all, do it yourself. In 3 years I live here i never met anyone who keeps his promises or knows what he is doing. They are all...

A self inflicted haircut

R u talking about the hair on your back? Just make a ponytail.

When I bought my current place the barns were overrun with rodents. Whater i tried was not enough till I find out abouts soda-flour method. In 3 days there was not a single rat nor mice. Now, 2 years later I get one in a week even if. Before it was 10 each night on 10 traps. 1part soda, one...

Yes, the dealer takes care of everything, but it is still, very frustrating. Yesterday the dealer brought the new cylinder, we replaced it. The issue is still there, the boom jumps on the swing, the TYM say it is supposed to be like this. My dealer organized to see a couple of his customers...

That is right, not a BH150. The dealer is still insisting that it is supposed to work like this. I asked why others don't do this - about 1000 of crickets i heard in the replay. I never had more garbage machine as this Branson 2515. Only 200 hours i already had leaking water pump 20 hours...

two final notes. 1. He gave me all wrong info, his name, his adres, his company name, the do not exists, so no way to find him, besides now i have more important thing to take care of. God will close account with him, such people never get rich not happy. He is going to run all his life. 2. I'm...

The real problem is, i did not want this project, but my wife always wanted it, but i was pushing it off. Two weeks ago she was diagnosed with cancer and i wanted to make something nice to her, to let her enjoy it, she loves to sit around an outdoor fireplace in the evenings. We do it almost...

And the brake lines crooked for drainage as well? :), not it was supposed to be level because i'll put a row of decorative bricks-retaining wall on the edge. I'm already $4K ++, now mini x, a dump track, pay to the dump side, then another God know who contractor, about $10K in a 530Sqft patio...

As it appeared, this creature does not know his but from his head, i showed him pictures, i explained what i want, i asked more than 10 times if he was sure it would be EXACTLY like this. and i told him i need 1-2" pebbles, not 1/4" ones I made it now and i want it now. yes i did, and he told...

Any pictures of the difference? Which one is better looking? I have one. The patio is approximately 530sqft. Will i survive at 95F with 85% humidity? :cry:

Tried it as well, the wire wheel leaves black/gray/silver metal color on the rocks, looks ugly. Here is what i was expecting: Not this:

What tool do I need to grind it? BTW, is it going to be shiny or rough? Do you have any pictures?

I tried 1600, nothing. I can rent up to 4400 PSI, it is $100 a day and 1 hour driving, not an issue if it works., but if not, it is another $100 in additional to all the money this jerk stole from me and acid and other things.

How much PSI would work?

Looking for an advise and TBN collective wisdom. I hired a concrete contractor to make me a patio with exposed aggregate concrete. The guy came, poured the concrete, sprayed the retarder, waited about 2 hours, washed and left. When he was leaving i asked them why there are so many spots covered...

What other forces could brake this in the middle of swing with bucket of gravel on flat ground?

The only thing I needed is a short video to see if others BH behave similar or not.

It broke approximately at 11 o'clock swing to the left. Question is, why the release valve did not open? It should be excessive pressure to do such damage

Thank you guys, you were real help. Next time i know whom to ask should i encounter any problem.

Last update, after 30 minutes of work

I'd expect they would behave similarly

No one has a BH?

I didn't put it in my OP? Stupid me, sorry

Could you guys who has similar tractor with backhoe run a similar test and even better to record how your backhoe is moving.

Both the same , no difference as i can see ILL try it tomorrow, and yes, why it suddenly happened, especially when Branson say it is correct behavior . Why it was not happening before and don't happen to you guys. YES, I tried, no changes. The only change I noticed - if I drug the bucket on...

Hi guys. I was posting on the hydraulic forum about my backhoe BH150 problem with my 2022 2515R On the swing it starts real fast, then slows down, then jumps again slamming the tractor, I recorder it on idle RPM because on the 2000 it is so violent. Here is the forum...

Yes, It was my first thought, and dealer agree that the play in the piston connections is too much, we disassembled it and there is absolutely NO bushing. Just a hole and the pin goes through it. The Branson also confirmed there is no bushing supposed to be. Also, if you look at the second...

Here are better vids.

Another reason i'm thinking about trapped air is the connections to the cylinders not on the top of it, but on the side which theoretically can trap some air above the fitting. But again, it is my theory which is most likely wrong. there are the pictures

To :K5lwq and rScotty - Yes, i understand by the diagram how it is supposed to work but due to my ignorance in tractor hydraulics i cannot see the whole picture where the problem could be, hence the only explanation comes from my experience with the automotive brake system - air in the system or...

It is a simple "T". In my opinion it does as i described. From the front of one cylinder the oil under the pressure escaped directly to the back of another cylinder and does not go to the tank. And as i see it, if there is air trapped inside, it will never escape and be play a role of a cushion...

The dealer just relays what branson told him, "it is supposed to be like this". Can you guy look at the video and compare it to your tractor. IS IT SUPOSED TO move like THIS?

ok, tried some things today: 1. Disconnected the rams from the boom. The BH swings freely by hand. So, no problem here. 2. Ran the rams without connecting them to the boom. Interesting note. The rams are connected between them hydraulically (llok the the diagram on the "Swing Cylinder" part) The...

Great idea, I'll try this. It is what he is going to do. If there no solution it is not going to help I posted the diagram a couple of days ago and will attach it again. Is it what you are looking for? Yes, it uses two rams. And my dealer is a great guy, however, he is not super...

Update, after removing all internals from the control valve and installing new conectors the problem is still there. It seems to me it changes behavior as time passes. Now if I extend the dipper stick and the boom parallel to the ground and start, let's say all the way from the right, and then...

Sorry, my fault, i was not clear. Affected the boom swing and dipper stick when I curl or extend it while the boom almost parallel to the ground, it stops in vertical position then keeps going. The rest of the BH functions well

Ok, here is today's update: 1. Removed the check valve, took out all internals, leaving virtually a hallow pipe, installed it back - no luck. 2. The dealer came with new connectors, we installed them, - no love ether. 3. Per some suggestions tried to pay with the 3pt. Closed the valve, opened...

This is the only hydraulic diagram i have for the BH I agree on this one, I highly doubt it is 3pt because i ALWAYS keep the 3pt all the way up and this problem just started

There are only two hoses, one comes from PB and another goes to the return port. No, i haven't tried the 3point, i'll tomorrow. Yes, you will get a full refund as soon as the BH starts working correctly ;)

Just found the schematics, looks like the hose from the check valve is supposed to be on the return line. So, mine is installed correctly.

As much as i understand the #1 is on the return hose, going back to the gear box. The one which comes from the PB is on the opposite side just below the #2 relief valve No vibration whatsoever. The only noise i hear is when i lower the boom, i hear loud sound of running fluid I hope it works...

No, it is both ways, right or left, starts fast then hiccups amost to the end, same with the curl functions, stops in the middle, hesitates a sec or two and keeps going

OK, so my understanding was wrong. So, what is left? Connectors?

It is just a bold spot, besides if my memory does not betrayed me, bobcats walk with tail curled or slightly up

It is definitely a feline, not a k9, and judging from the long tail it is a ML, cougar, puma

Interesting, meaning there is something wrong with the check valve because it got warmer. In my understanding, if it's función only to prevent backward connection, it should not work at all - get warmer ?

Any rpm

I put a load, noting changed as i could notice, no noise level, no RPM. The only difference was that it started running a little smother because of the increased inertia, it does not stop as abruptly as the empty one. Ran it 1K, 1.5 and 1.8RPM I opened the panel and tried to listen, and put my...

It was installed by the dealer when i purchased the tractor+BH They are different, no way to reverse, only one way to connect, besides, it worked this way before. I attached the pictures of them So far for me it looks like it does affect all the functions, the turn and the curl of the boom are...

I attached the picture how the BH connected to the tractor. I don't see any problem with the loader. it works smooth. The dealer told me to connect and reconnect the CCs, no love here, same issue. The connection is solid, no leaks. Also, i don't see any additional filters besides the one for...

I dont know the difference, it is a line which i make a loop when the backhoe is not connected. It comes from the rear of the gear box. I guess it is a dedicated line but not sure.

Need advise, Yesterday my backhoe started acting up. If i take the boom all the way to one side and then start turning it back, it goes 1/3 of the way, then stops for a second, then keeps going another 1/3, then hesitates again, then goes all the way to the end. Pretty much same thing with the...

1. In 40 years no one was able to find any, so, the fine is $0 vs See above:) 2. Remember about the elbows? When you are in his shoes, you might change your opinion, for us who does not have such problem it is easy to judge from our tall tree. OK, i'm done with this. Not trying to convince...

Kill - it means very high probability of $1,000s of fines in case of bear and potential jail time in addition to very, very steep fines in case of cougar (Most of them have a GPS attached, so SSS is a little problematic there). Leave alone? just seat and watch how they kill your livestock? What...

Imo, still annoying, every time you have to get off the tractor you have to remember to detach it and then to attach it again. I would get nuts after 2 times or forget about it.

Depends on the seat construction, but I gues is easy to do, but useless and annoying thing. You will throw it away after 15 minutes of work.

It is your opinion, and opinions like elbows, most have two. The closest neighbor is at least 10 miles away, so, no problem here. Killing a bear or worse a cugar is a huge problem, can go to a jail time in CA, so either SSS, or do what he does. Also, when one chose his well being ( his...

My friend, who lives in North CA, has black bear and mountain lion problem. To protect his 200 cows he just shoots them in the gut with 22. They never come back and he never had to worry about what to do with the carcass or if someone finds it. With 22 wound they get far enough no one can find...

Oh, OK, makes sense, but the excavator is 5k+ and 200 for green and yellow to impress the neighbors 😉

My tractor. For some reason after buying my 60 acre property I thought I could get around without one. For 2 years I was "getting around " till I thought " enough is enough "

What does it mean?

$200 is some "quick change" whatever it means, the excavator is $5,395 plus shipping

I thought about it and dropped the idea. On my property they would be broken before i can say "Jack".

different parts of US different prices. In Silicon Valley, CA no one is going to look in to your direction for less than $800, just to begin with. I learned to weld, with flux core mig welder it is easy. $200 HF welder, welding mask $25-50 and other things around another $50-100 For $300-400...

I run farm boss 041 1968. Regular 87 with walmatr 2 stroke oil. No issues so far. All my 2 stroke run on 40:1 mix

It is why I chose to buy shuttle shift with 12 gears. Never a problem, full, rocks, roots, what not.

I have 6" Titan BB and have no issues whatsoever.

Yep, there is 3 point skinning pole attachment with a gambrel, works well together with a hay spear.

Not helpful for me in two situation, when the sun is real bright and when i for reverse i don't see the dashboard, Sound alarm is more noticeable, Easy to install, better indication Actually, i was answering MR Orange question about antitheft ;) But this mode is for people who does NOT have...

....forcing the manufacturers to raise price of parts and such to compensate for the loss in revenue and some 300% more , We had it already with the Obamacare, remember prices of health insurance before? They are not stupid, they will keep their profit either way and make even more money.

Just my thought and experience with the antitheft devises. Battery disconnect does not work if the thief has some knowledge and little time. easy to bypass. In my experience which proven by years of experience fuel pump disconnect is much better. You hide a micro switch or a magnet activated...

Good. You have stronger back then i do. For me It is difficult with 60 acres, 20 of which i mow

What about twigs, do you have any in the spring? I actually built it for twigs, leaves are my last concern but a nice bonus is i'm able to collect them. BTW in December it is snow or rain. A little awkward to mow the 2 inch snow ;) I start mulching them in October-November, but majority falls...

I did not want to install it in line with the parking brake indicator because when i off the tractor or working on backhoe it would drive me crazy(like im not already :LOL:...) Here is one more solution, inspired by this thread ;)...

I always, with no failure, forget to disengage my parking brake. It sooooo pisses me off, not because i forget to do so, but because it is one additional reminder of my age :mad: In addition to a visual indicator i thought a loud noise would be helpful. It seemed that installing a buzzer in...

When you are 100% correct about WD40, (WD stands for Water displacement i think), now this company has some other WD40 products for rust prevention, penetrant, lube and such. All of them go under the name WD40.

Update. Last fall after 10 minutes use i was not impressed with how it worked. Then the winter came and i never got a chance to property evaluate it. Now come spring and it was the time to give it a try. After i got a hold how to use it, adjusted the upper arm correctly i was really impressed...

https://www.tractorbynet.com/forums/threads/35-debris-forks.463277/#post-6473748

BTW, some ppl swear by Woolwax. They say it is much better than fluid film. I have no experience with either.

I guess you use mistic jt6 which is grease, jt8 is heavy duty oil, as I remember, but I might be wrong. Actually, imo, any grease works as long as you use it regularly. The moly or lithium gives additional level of protection. On metal parts I use same heavy duty or rad grease, whatever I...

https://media.tractorsupply.com/is/image/TractorSupplyCompany/1028447?wid=456&hei=456&fmt=jpeg&qlt=100,0&resMode=sharp2&op_usm=0.9,1.0,8,0

Branson: I made a comparison table of main tractor brands having dealership in 1 hour driving radius> More lift power No computer on any HP, meaning no DEF, regen and such bull.... More weight Better service than RK (Anything is better than RK service for this matter) Price. For instance: to...

8 month ago I considereRK tractor. Good thing I took another route

I get them from Harbor freight https://www.harborfreight.com/self-adhesive-rubber-safety-step-mat-98858.html

Someone asked already but i could not find an answer, old thread i guess, Are armrests useful on a tractor sit? BTW, i'm very happy with my 2515 adjustable sit, but thinking of adding armrest kit one like this one: https://www.tractorjoe.com/ar22bl-armrest-assembly-rh-lh-bracket-blk-1

I know, I was commenting on the comment about loader hydraulic line cover.

Exactly, it was made on purpose: 1. To keep you busy and out of trouble. 2. To let you brag about on tractor forum :ROFLMAO:

It is original, isn't it?

First i straitaned it. Then cut and riveted 2 little seel pieces . Took about 10 minutes.

Nothing is wrong with having a clean ass vs. dirty one, and I'd prefer living in a society with clean behinds. Just a little sighn of development.

Nope, they print very good looking checks. Your bank takes it, give you cash or deposit money in to your account. Then they mail this check to the issuing institution, they see it is a fake check, send it back to your bank, your bank takes the money fr9m your account. Meanwhile you already...

Here is much easier solution, 10 minutes of work, much faster than driving to the dealer, and costs whooping $0.00 and you will not be able to brake it again

It is why normal ppl converted to metrics long time ago.

It is a known scum, they pri t "cashiers checks" at their home computer. Then 2 weeks later, when this check comes back, your bank comes after you. This scheme was described 1000s of times oil over the internet. I' m actually surprised you never heard of it 😕

I made mine out of the white, but I gues black would work as well as long as you heat it adequately

Mine too, only on the ROPS, but I wanted to have one on the righ side as well, the more the merrier 😄

Don't forget, America is about 50 years behind Europe, so take pity on us.

In my case it is absolutely useless thing. But since I made it mysef, I'm off by roughly $30 and if I need angles for my next project I can cut it and reuse the metal.

It is what actually happens. It cleans very well until it doesn't. every 20 yard or so, depending on the amount of leaves, I had to stop, lift 3pnt, drive a couple of feet back to release accumulated leaves and continue. Then with the brush forks i built, i pick up those smaller piles to a...

Was browsing for some metal at my local metal recycle place. Found some good size angles. for $0.30 per pound it was not a brainer. Ordered some baler teeth online. The Carry all come out much stronger than the store bought but i actually have no use for it besides attaching the rake. I...

Interesting, i'd think it is a new model's thing but my friend's and my neighbor's are at least 5 YO but they have similar design. Go figure

Brought this baby home on Friday. I loved it so much that decided to brush up on my leather tooling skill and made a holster. So far a great gun, wanted something cheap to improve my handgun shooting. The holster came out so-so, my well forgotten skill. I might redo it soon.

For $35? :unsure:

This drink is for picture only, wife friendly so to speak, not to raise any suspisions. ;) The bottom part is just bent portion of same pvc pipe. Heat it and shape it. Exactly like the upper part which is attached to the ROPS.

New 2515s have a cupholder attached to the left side of ROPs. Had some free time and added another one on the left side

On 2515 there is no pin or nothing to securely hold it on. It just snaps on and held by tension of the plastic around the metal rod. You can see it on the picture.

Interesting. Before buying my own tractor i could use my friend's 4820, the plastic part was long gone. My neighbor's also missing one as he says "from the day one". Mine started falling off after the first 10 hours. I was lucky to find it on the ground.

Dont know what it is, never noticed it, i guess mine does not have it at all ;)

Plastic pad of the "Gas"/RPM pedal was constantly falling off. A quick fix - drilled two holes and secured it with a cable tie.

After long reserch a bought 1000 because it has a true gear, not a belt driven trans. I have it for over 2 years now, more than 1,700 miles so far. Since it is a true gear, not a belt driven, it jumps a little till you get used to it. Extremely strong machine, i tow a 14' trailer full of wood...

Tried my welding skills (not so good, haven't been welding for more than 45 years). But eventually it worked, i'm happy with the result. Got it right on the second try. On the first one of the cross bars got bent. Removed them and it seemed to work better.

My data showes: WL7237 Wix51626 Napa gold 107237 TG3985