Search results

Do your work in comfort year round! 2007 Kubota L5030 HSTC 4X4 Only 1048.5 Hours! 50 H.P. - Pre-Tier IV Emissions No REGEN, No DEF Filters Hydrostatic Transmission-3 Range Cab with Heat/Air/Stereo LA 853 Quick Attach Loader Quick Attach Bucket with/grab hooks Front and Rear work lights...

Went with a cab with heat and AC this time. Will be nice for the cold weather. And it fits through an 8’ high door nicely.

This is one of Kubota’s Tractor Loader Backhoe (TLB) Series machines. They are built for construction duty work with stronger frames, stronger hydraulics systems, higher lift capacity loaders and stronger digging and lifting backhoes than their same size agricultural counterparts. 2012 Kubota...

My new to me 2012 L45. She is going to need a little T.L.C. But this one has a hydraulic thumb on the backhoe, auxiliary hydraulics up front (controlled at the loader), and three auxiliary hydraulics at the back for three point hitch operation! I have never had that before. Also came with the...

My new to me 401C got a little work done today. I hope to continue some winter work with it. But apparently more snow is on the way. We have had two storms. One dropped over two feet on us just before Christmas. But each storms snow melted away. We currently have about 4” of a mix on the ground...

4X4 Kubota Tractor w/Loader, BH90 Backhoe. Low hour, Pre Tier 4 Emissions! NO REGEN, NO EXTRA FILTERS-NO DEF NEEDED. Year 2004 Manufacturer-Kubota Model L5030 HST - Hydrostatic Trans Serial Number 34278 Only 889 hours now, hours going up a little as I use it. Front Tire Size - 10-16.5 Rear...

My new to me 2004 Kubota L5030 HST. It’s in nice shape for the year with only 785 hours when bought. I’m at about 808 now. I’ve been mowing with rotary cutter and now moving a bunch of sandy loam type topsoil. Great to be back to hydrostatic! Anyone own one of these? And how has yours been for you?

2305 Hours on working meter. Starts good. Runs good. Operates good. Everything works. Plug in in-line heater. Battery shut off switch. Includes Ford sickle bar mower. Completely degreased, stripped with various size wire wheels, including the underside, to remove all surface rust and loose...

Hey guys. I bought a Ford 2120 that I will be fixing up. Was wondering if you could confirm year for me. Serial number is UV21865. I believe it to be a 1988, but want to be sure I have it correct. Thank you.

I’m sure this is probably something simple. But today my mower is cutting out and 3-point hitch is not going down. Yesterday everything worked fine. Any ideas?

Well I decided to get a Kubota M59. Traded in my last tractor. Nough said. I thought I had better start talking with some other M59 owners on TBN and see what I can learn. It’s also time to read the manual. LOL As part of the purchase deal I had them install auxiliary hydraulics up front and...

Tractor is on snow duty now. That’s it. We have received about 6” so far and looks like we will get another 2-4 anyway. Then a few more on Christmas Day. For everyone in this area who wanted a White Christmas, they got it. Merry Christmas and Happy New Year to all of you!

Wishing all of you a very Happy Thanksgiving with your family and/or friends!

Wondering if any Mahindra owners could offer up suggestions on contacting Mahindra representatives and getting problems resolved. I was really excited about my Mahindra when I got it. My 3550 can do some serious work, when it's working. The combination of power and the hydrostatic transmission...

Using my new Mahindra 3550 4X4 HST for snow removal. Wondering what you folks who use hydrastatuc tractors generally run your RPMs at. I have been adjusting and getting use to the HST. Recently settled on about 1500 RPMs in Medium gear range. Any other snow practice or tips with just using a...

Hello all. I have ordered my new Mahindra 3550 HST. I have been reading here about Mahindra Tractors, looks like happy owners and some unhappy owners. I am wondering if any of you would suggest a checklist, or something else, for me to go through with my dealer. I know some of the problems I...

Hello all. I have been buying used, low hour machines in the past. Working them for 1-2 years and then selling them. Get a lot of work done with them and then get most of my money back out of them. This time I have decided to go new. Get a warranty and have a local dealer to service it. I've...

Okay. I'm back again. LOL Different piece of equipment now and the same problem. Would like chains on rear tires. LOL Can I put tire chains on the rear tires of my Kubota L35? I have seen in a couple different places where people say there is a space issue. ? Has anyone put chains on the rears...

I bought a one year old Woods Brushbull-60". The driveline has a locking ring you are suppose to slide forward /backward when taking on/off. The three steel balls inside will not let the shaft from mower go on past those three balls. I sprayed them with some liquid wrench and cleaned PTO shaft...

Hello guys. I am looking at a Cockshutt 1365. 4wd with a cab. Seems to be in nice shape. Can you still get parts for these tractors? Anyone own one? Can you tell me what you think of them? Thanks for your time.

Hey guys. Been a while since I have been on this site. I have purchased some property and a Ford 851 Powermaster. I just built a wood box on top of a carry all frame I bought at Tractor Supply that was rated at 1000 lbs for the frame. I don't plan on loading it that much but some have advised me...

Well folks I bought my next Tractor/Loader/Backhoe. I found an 05 Bobcat B300 with a cab with heat! All I have had time to do with it was park it. Then had to go away for several days and then back to work. It is driving me crazy not being able to use it. I will have some time over the next few...

Hello everyone. I am looking at a 2004 Bobcat B300 TLB. Will be using whatever machine I decide on my property for digging some drainage ditches, pulling some stumps and rocks, moving material with bucket, moving material with forks, adding a grapple in the future for moving brush, stumps, snow...

Quick question for you. Anyone have experience with a collar shift transmission? If you do, could you tell me how you liked it? Is it necessary to "double clutch" each time you change gears with this transmission? If so, is that a P.I.A. when doing loader work? I am looking at a John Deere 5200...

I am at a toss up of getting chains for my rear tires or adding some pallet forks to my bucket up front. I could really use some pallet forks. My bucket is not quick attach. I noticed on my bucket it looks like there may have been a bar on it prior to me buying it. I don't know if that was used...

Hey guys. I am thinking of buying some tire chains for my tractor. What can you give me for advice. Thinking of Duo-ladder Combination from Tirechains.com. Like these. Duo Ladder Tractor Tire Chains Well. Tried to load a picture from my computer but that didn't seem to work for some reason...

Should both front wheels be driving when I have the four wheel drive engaged on my L3710? While plowing snow I spin often with the industrial tires when things get slippery. Tread is in good shape. Only 1200 hours on tractor. I am going to get a set of tire chains for the rear wheels when I have...

Hey guys. I own a L3710 with Kubota loader and Woods backhoe. About 1200 hours on the machine now. Works great. I have a slight fluid leak at the right side of tractor(if sitting on the tractor) on the front axle. Right where the axle ends there are four bolts that connect it up to the wheel...

I am looking for best practice advice when using a backhoe. I have done a bit of work with different loader/backhoes over the years. (Large and small.)But I certainly am no expert. I currently own and operate a Kubota L3710 with loader and backhoe. I am in the process of some landscape work to...

While working in the woods I somehow managed to break the negative lead to the battery. I think a small Ash sapling found it's way up through the underneath and hit the lead. The soft metal, not sure if it alluminum?, broke. I had to wrap the negative wire to the post with a piece of copper...

Well I finally bought a tractor. Wife not happy. Hardly ever is. What are ya goin to do? Anywho, it is a 2001 Kubota 3710HST with industrial tires, a kubota loader with 66" bucket, and a frame mounted backhoe with a 16" hoe bucket w/thumb. I have had enough time to move a few things around in...

Hello all. I am looking around at tractors and thought this would be a good place to learn. New York state area. Have some experience with an old 9N. Have run JD loader/backhoes, a couple of Kamatsu track hoes or excavators, Gehl skid steer, dump truck, etc. over the years. Am looking for a used...

Hello. First time on this site. I am looking at a 1982 Long 460DT with a loader and was wondering if anyone had any experience with them. I need a reliable tractor. The tractor has 3700 hours and looks to be in good shape. The price is in my range and I want a tractor that can do some heavier...