Search results

This would not be a case of delayed construction due to parts but Companies deciding on what and how many would sell and stockpiling a limited number at a central location. This stock would be replaced as deleted. It would keep a lot less inventory on the shelves.

Anyone note the water issues between two states that has contracts going back over a hundred years. Can’t offhand recall the States but I think the Platte River is involved.

Don’t think you’d even get close. No one owns the water under their land Or that falls on their land.

Sorry, the rights to the water Under your land will belong to others.

patience: As the forest matures ground level growth diminishes.

Be aware large inventory stocks are a thing of the past. Inventories cost money!

It may be the water rights have long ago been claimed. It will go as far as roof runoff water usage. It’ll date back to the start of major irrigation. It also covers much more area tha one realizes. Like all of the Us and Canada.

It’s for real.

Dropping the bucket just may slow you down! let’s not forget the effect of the operator leaning into the hill or planing-cross hillside paths utilizing the effect of engine torque!

And then there is the backflip if it’s not done properly!

There will be codes regulating the type of chimney.

Free firewood is an illusion!

The stability of a tractor is related to the layout dimensions and weight distribution. Ie; how the force vectors fit into the layout dimensions. A low centre of gravity is independent of stability. Loaders are usually the best downhill braking system.

When the towed load gets out sideways to the tractor two or four wheel drive don’t matter.

Muhammad started this site in his teens. I do believe his father added a lot of advice in the early years but don’t think he had any hands on help. Muhammad definitely deserves allocates for his accomplishment.

Bought 96 cumins 2500 extended cab 4x4 new. It’s now got 250K kilometres on it. It spent most of its life with a 2500 lb. Camper on it towing a fully loaded 10 K trailer mostly over some rough roads. All suspension parts have been replaced with heavy duty after market parts. The transmission ...

Might be best to follow your plan to run as is and then sell If it’s possible to keep it running. If you do touch the pump make sure you can get a replacement pump that will fit Before any work is done.

4200 JD: Thermistor behind fuse panel buried inside of a bundle of wires. Took me a few years to find it.

Best old used truck = 12 valve doge cumins with inline injector pump.

As said. Weld on new cutting edge!

Should have lots of choices in market garden equipment.

Chances are the pasture will not have enough desirable hay grass in it. Cultivate the land , clear the rocks and reseed with grass of choice and a cover crop. Hay land may have a loss of desirable grasses over the years and will have to be rotated To a different crop or reseeded. This is a...

Be aware that garage pits are probably illegal due to safety issues.

One of these may fit your pocket. For consideration maybe a nice leather belt tool pouch that keeps your pockets empty and comfortable.

Is that yield bulk product or nutritional value of the product. Is the base seed self substaining? How do the products compare in adverse growing Conditions?

Think about a road grader. It can dig up the gravel, mix it well and then lay it back down. The operator will be able to separate the larger rock and lay it in the bottom.

I found the thermistor in my 4200 right in the middle of a wire bundle. Had to spread out the wire bundle to see it.

Stuff a pillow case with sweet grass and lavender. Add or subtract as required.

Egon grew up on a farm in the land of Alberta. This was at a time that a large tractor was maybe forty or so horsepower. Many farms of 320 acres were worked with two wheel drive 30 HP or less tractor with no three point attachments. There would be a pro and belt drive. Things have changed since...

In my personal experience most tractor maintenance is related to operator error. Most tractor owners follow a pretty precise maintenance schedule Not errors. Commercial concerns will keep track of all time and hours when a piece of equipment is serviced and parts replaced. They also keep in...

You will also have to Know the drainage rate to the leach field. There has to be a sufficient slope for the drainage water to keep the solids moving. You are probably best to hire a competent engineering firm. Horizontal bores can also be used to minimize surface disturbance.

Bandwidth may have a lot to do with rock pulling experience!

Maybe look at the full face masks.

There are lots of wood stoves available. Shop around and pick one that fits your space with the proper chimney. Check out your local code requirements for installation. For make up air for the cabin there will be commercial products available. ( At one time a downcomer terminated in a five...

A site with information on milling lumber. Long read but can be skipped through to find pertinent information. There is a very good index. http://images.mofcom.gov.cn/gy/201310/2013102504430546.pdf

Commercial sawmills will only accept logs at a certain moisture content. This ensures the milled lumber will meet standard specs when dried.

It’s actually a very good reply based on original information given.

Maybe calcite deposited in the limestone.

Link for log booms??

If you want four walls shroud the engine so the cooling fan brings in outside air that gets exhausted outside. For the exhaust use flexible metal exhaust pipe with a proper wall fitting. Run the exhaust pipe into two 45 barrels connected via the large bungs and make a larger hole in the last...

Plane the boards just before using. Planing wet and stickered stacking usually means you will plane again before use

Looks like it could climb terraced fields.

That is a good plan. Enough leverage and regulated force will make for a nice looking job. Should add that when straightened cool the heated parts down slowly.

Outside bench that holds a portable planer. Treated lumber construction supported by two three legged saw horses.

Maybe have a look at the cruise control.

Lot’s of heat, cherry red, and a ten pound sledge may do it. Might want to have it blocked up when hammering

mercaptan may be an alternative???

What was the forestry mulching?

Sand is a generic tern for small sizes of rock. Grading depends on how well the particulate sizes are distributed. It’s use will help keep the tackcote from tracking. Over time the tackcote will get hard and dry and the sand just blends into the topcoat.

Just weld a new nipple on top of the present one. For neatness grind off the present nipple and then weld on a new one. Best done in a shop.

Spray on some real tackcote ( not the hardware type ) and then use a vibrating roller to pack it. Keep the roller wet. When finished cover it with sand and pack again. It will turn black after a year or so.

I surely did read the post. With the given information and not knowing local codes it is not possible to advise the OP on the installation specifics. You ever fill and carry a bucket of propane?

Sharpen the tooth so it is more perpendicular to the bar. Don't completely eliminate a point, but don't make the point do the whole lead. Sounds like a rip chain?

Since the op has drilled into the lead ball threading in a coarse lag screw should give a point to pull from. If excitement is wanted a little gasoline or propane down the ignition hole with a long fuse may be considered!!

https://www.researchgate.net/publication/41698529_Composition_distribution_and_supposed_origin_of_mineral_inclusions_in_sessile_oak_wood_-_Consequences_for_microdensitometrical_analysis

There will be technical data backing up your thoughts.

Your present tractor will work fine. The same sized tractors have been used to convert many a pasture into seeded crop land. ( pastures like over 50 acres ) Plough the area. Weight your disk down and work the ploughed area in different directions till the sod is broke up. Then use a drag about...

I’ve had that. Only we stirred up the yolk.

It’s the mercaptan added to the propane that stinks.

The propane supplier can figure out the volumes and line size required. The installation will also have to meet their specifications before they will fill your tank. Note: the generator may need a special kit to use propane. More to it than just switching the fuel lines.

Use vinegar, coke or anther fluid containing phosphoric acid and completely fill the barrel and let and let sit for a few days. Then drain and scrub out the bore with wire brush or Sandpaper or whatever. Then proceed as you have been Using water pressure.

No need to be sorry. In the ensuing years I have learned that the hoe will dig quite well but I’ll never develop the skill of the good hoe operator’s I have watched for countless hours in another life!

https://www.google.ca/aclk?sa=l&ai=DChcSEwjFvK7Oxqr4AhUUhMgKHYp-CUoYABAhGgJxdQ&ae=2&sig=AOD64_2BdwW_5DpIkAyYqQ7XU9dc3cVEog&adurl&ctype=5&ved=2ahUKEwjy-KDOxqr4AhX4sHIEHQfpBmcQ8w56BQgBEPMC Does that sickle bar have this type of bushing. If so a torch may be in order as the bushing will probably...

That hole looks like it was cut out to access the bolt. It’s not An original hole.

With water heaters the problem may be a heater that does not shut off and creates steam.

N No problems.

Using the description “boiler drain” is generic for the type/design of the valve. They are usually a globe type valve so a specified drain value can be maintained. Any pressure tank should have a preset pressure relief valve set at recommended pressure by vessel manufacturer.

There are hydraulic wedges used in felling so the jack works the same as a wedge. Should work well.

Good plan.

Gotta see how it’s laying on the berm and what kind of clearance that you can make. Then make a cut location and method. Probably cut near the base where the tree trunk is closest to the ground. Might consider cutting out wedges from the topside of the trunk to avoid pinching the blade...

https://www.weingartz.com/illustrated-diagram/john-deere-parts-lookup/model-755-compact-utility-tractor-pc2054/4275-35257 Some diagrams here. Clumsy wording but positive connection was meat to be a driveline connection. There will be pictures as well as parts listing in the above site.

Is their a positive between the engine and transmission? Should say positive connection like a drive shaft.

Check the hydraulic fluid levels.

You got ruts in well grassed ground? Cultivate the area and then a drag to level it. You got lots of tractor.

https://en.wikipedia.org/wiki/2021_Texas_power_crisis Some information on the situation.

Just recently did not Texas have a very cold period the caused power outages? It seems the conventional power sources failed whereas solar and wind kept functioning. Keep in mind that oil fields have surface areas around well heads, surface area for transportation systems, surface area for...

@Egon: No offense, but you did not answer my question and came with a value-free opinion. That is laudable, of course, but hardly a contribution to any discussion. Your question was answered. All that is required is a fluid that works within the parameters of the max/min heat available. The...

Put some gauge wheels on your back blade, rip up the surface and then work a windrow back and forth across the road.

Ottawa storm 2022: Manotick man powers neighbourhood with 'microgrid' house Home power system helps neighbourhood out after storm damaged electrical supply.

Working fluid and heat differential is all that is required.

As time progresses thing do change.

https://www.thenationalnews.com/business/road-to-net-zero/2022/05/22/japanese-start-up-electrifies-farms-using-solar-power-to-grow-crops-and-profits/

Any implement dealer should have the dimensions and type of tine available and be able to order them for you.

The reality is you eat the products grown under the solar panels!

Energy is not restricted to heating only; that is only a small part of the world's and nation's energy packet. In the whole it is electricity that is required for the big major part, and water of 80C (175F) does not make any of that. Heat is energy. It can be converted to other forms like...

Nothing odd about moving. People do it all the time. Usually more than once.

Nice information.

A bit off topic but related to ploughs. https://download.kvernelandgroup.com/content/download/96770/868716/file/Ploughing

The coming change in energy sources is inevitable! Solar viability and storage? Take a look at Drakes Landing. Solar based community with ground storage system For heat. It’s been in operation for a few years. It works. https://www.dlsc.ca/

consider laying out the cutting sequence so the flat sawn are thinner and the quarter/rift sawn contain some four inch nominal sizes and some deeper two inch boards.

There be a lot of material items in todays society that do require education to manufacture. It would also seem many professions like, Medical Field, require a lot of education plus work(personal time) to achieve a professional status. I’m quite sure I could manage to pull a tooth but the...

We actually do not “Own” land. It is all rented By way of Taxes. We actually purchase the right to use.

Scarifiers only loosen up the material. They do not move it to the top.

Dead weight and live weight. One increases the axle load. The other has no effect. Loaded tires do not put weight on the axles.

The original plan should work well. Might want to consider putting in a concrete footing to replace the brick. Budget decision.

Tire weight has less negative effect on the tractor than three point weight from a wear prospective.

That type of terminology might be variable as to the type of occupation you are in!

https://en.wikipedia.org/wiki/La_Tomatina Tomato festival in Spain.

And how much arable farmable land is covered in concrete and asphalt?

Moved to the other side of the country.

No TV so didn’t get to watch as a kid. In fact TV was not available till my mid teens.

Loader will work fine removing the top soil. Just spread the new gravel with the loader. It will blend in nicely with the existing driveway. A back blade with gauge wheels might be the best choice for maintenance. It can pull the edges up. Windrow back and forth will mix the fines and coarser...

Phosphoric acid does a great job on rust. It gets into the interstitial granular rust that can’t be seen and neutralizes it.

The equipment you have should work. Maybe build a log drag to help in the levelling. Soil test and amendments and check with the district Agriculturist for seed type. Add a cover crop when seeding to help protect the new grass. Let it grow taller before mowing and keep subsequent mowings at...

It may be a JD commercial unit??

Rear blade with gauge wheels. If moving material is a priority the bucket will do it much better than a box blade.

proper rated compression fittings. There are different types but you will not find them at the local hardware. A proper fittings shop can help. https://products.swagelok.com/fittings/c/100?clp=true

Proper rated tubing and compression fittings!

Be aware that the oil companies major profit comes from the sale of crude oil. The refined crude and ensuing sales outlets may be mostly franchised operations!

Can’t recall saying the electric car industry did not receive subsidies. Did mention that fossil fuel industry received subsidies!

https://e360.yale.edu/digest/fossil-fuels-received-5-9-trillion-in-subsidies-in-2020-report-finds

Your saying horses and wagons, bicycles etc. would be allowed on all highways?

Bettcha there were subsidies and other perks available.

European power sources: https://www.forbes.com/sites/davidrvetter/2021/01/25/its-official-in-2020-renewable-energy-beat-fossil-fuels-across-europe/ I was just thinking, hard, I know, that there was a time when gasoline filling stations were hard to find. Horse stables would have been more...

Do the paddles move with the handle? Otherwise it looks just like a cylinder piston pump. Can’t tell which direction it pumps in. It also very similar to a bilge pump. For some reason it would look like a pump set in a tank and the paddles are for mixing whatever is pumped in??

Knee pads keep slipping for me. I’ve been thinking of getting a pocket sewn over my pant knees that a piece of foam would slip in.

The jobs you require the tractor for.

Low bidder!

Perhaps think about the resources required for building a nuclear/coal fired power plant. Then add in the requirements for “after the event“ pollution mitigation. Things like acid rain or the destruction of the Appalachian Streams. ( water quality )

In other words it does not agree with your ideas?

Bird kills: https://www.fws.gov/library/collections/threats-birds

This would sound like the way to go. Just make sure the pipe inlet is below grade and ported from erosion.

For the job at hand a Tiller would be an ideal implement. It works well in uncultivated ground and probably goes deeper than a disk. For the first & second year you plots may not be as productive as you wish But as the soil gets conditioned growth increases. Culti pack after seeding.

Heavy soil, lots of rocks, 25 HP. ?? It’s gonna be hard to pull a disk that will do any good. Plow with trips or a chisel type cultivator would probably be better choices. A rock picker would surely help.

Garrison Dam: https://en.wikipedia.org/wiki/Garrison_Dam I was about 12 years behind this operation when I entered the construction industry. My employer was the same one whose yellow/black service rig was shown.

Perhaps sunspots?

It looks like that outside screw will be what’s holding the plug in. easiest way to handle the fuel is to drain the tank.

On the original if the on/off handle has a screw in the middle try tightening it. If that screw can be removed the valve handle and plug may be removable.

Consider keeping both right side gangs on the disk. Run the front straight to cut and the back angled to pull dirt onto the road. Lots of weight on the front gang to cut deeper and keep the implement from going sideways. A plow might also be able to throw dirt sideways. Many years ago many...

D6 sized cat or bigger with a root rake. It would be advantageous to the operator if there was a proper cage on the cat to protect the operator from tree material that comes back. The dozer can also windrow/pile the debris. Follow up with a dozer pulled breaking disk. There have been many...

Jd 2010: TractorData.com John Deere 2010 tractor information There are some who are inquisitive.

Mole plow, Mole ripper.

Need parts? Buy new or use worn out salvaged parts?

Disk’s are a common primary tillage tool In agriculture. All it takes is the proper sized equipment. Tillage equipment: https://www.farm-equipment.com/articles/13905-a-tillage-tool-primer-for-equipment-dealers

Kinda vague question. Park the tractor outside!

Don’t forget the sodies, rock houses or snow houses.

We too live in a house constructed from full sized lumber. Our previous house was logs. we Also have a parcel of land with lots of sawmill quality trees. Plywood a OSB definitely have an important place in construction materials.

There was a time there was no plywood or Osb. Things got built with just lumber.

Figure out what needs to be done and then go shopping for the equipment that meets your needs! And do have patience.

Make a cut through the welds. See what penetration is like.

Pick axe/ mattock all the same Just plain hard work.

Knowing how to use a mattock may be a skill best ignored. It’s just plain hard work!

Three cauls, each end and middle should do it. For the clamps they should be spaced evenly with half on the top the other half on the bottom. The number depends on how many are available. check out YouTube; you’ll get some good information with pictures.

If’n the head slides down the Mattock hasn’t been used for a time and the handle is dry. I can also go back three generations of mattock use. Got one in the shed that only goes back a verifiable two generations.

Top two boards; glue and clamps with several cauls to keep it flat. The glue edge is strong and doesn’t require biscuits, dowels or tongue and groove. The cauls make for easy alignment. Saran Wrap on the cauls keeps them from being glued on. The other questions are a matter of personal...

It does not have to be a full swing. Any portion of an arc will do.

The qualities of rebar might change depending on how it is used.

All the swing has to do is form an arc.

Inertia keeps the head in place. Prying forces will not slip the head off of the handle.

Hay Tedder might work.

3/4 in. pipe clamp with stands and a homemade clamp That stands on it’s own.

https://en.wikipedia.org/wiki/Wrench

The cauls you will have to make yourself.

Spanner!

Used to be a very common practice.

Replace with a bolt and nylon lock nut.

Use cauls. They work!

If the OP is new to woodwork he should go to the internet. Lots of descriptions on glueing jigs and building your own clamps. Building your own is quite easy and you can make them stiffer than a pipe Clamp. Also much cheaper and can be sized to fit. Keep in mind cauls for flat board glue ups...

As others have said: Report Suspected activities to the proper authorities and then just ignore it. Don’t get personally involved. Commercial Hemp is a very useful product and it’s use should be expanded!

Use the schedule 40 and build an A frame

It would be easy to make some clamps like those shown and use a ratchet strap. The picture shown has an incorrect orientation.

I would think you are right.

There should be welding rods available for hardsurfacing. You should also be able to find a pattern that suits your needs.

Some of this should do for a phosphate replacement.I have used a product that dairies used to clean their milk lines. It contained phosphoric acid and was reasonably priced. I can’t get it anymore.

What is the trailer load rating?

If you are looking at new routers keep in mind the physical size and location of the on/off switch. Ergonomics that suit your hands. This changes when the router is mounted to a table. The regular inexpensive carbide tipped router bits of today could be considered heaven to some of the steel...

Power wash everything you can get to including the interiors of the frame. Get the rocker panels and wheel wells too. Then spray it with a rust inhibitor. ( tremclad ?? ) Finish off by spraying on an under coating. If you make your own undercoating it can be quite economical. ( roofing tar...

That is the best option. Follow up with a breaking disk and the land should be cultivatable. A larger Cat would be preferred. There really is no light duty equipment option for removing large stumps and levelling the land. Get the proper equipment and clean it up. In the long run that is the...

Can more weight be added to the bucket? At the rear can you get more down force by altering the hitching configuration slightly?

You gotta keep in mind that the top section of the pipe has to be restrained in some fashion when the coupling is broken. many different ways of lifting the pipe in shorter steps.

It can be done and has been done many times. You have to design a derick ( numerous methods) , select the winch cable and attachment tools, figure out how you lay the pipe down, figure out how to hold the Down hole string in place when couplings are broken out, and lastly devise a safety cable...

Smooth drum is much different than a sheep foot type. Vibratory with smooth drum works well.

Beginner routing: For bits just start with an inexpensive hardware store set. Practice lots on scrap wood. When the time comes for real work get specific quality bits for the job at hand. Might look at a better router also. practice and watching you tube videos will be of great help.

John Deere, another version. https://www.deere.com/en/our-company/history/john-deere/

Plate tamper will require Best be checking on what kind of materials a Sheep Foot packer will work on!,

Just get the one that gives proper vibes when you sit on it.

All the levers in the proper position?

As mentioned, a cupola. Or, a fan set up with an inductor. Fan blows ambient temperature air. Instead of the air starved fire pit build up a platform for the fire to sit on. Makes for better air flow and ambiance. Somewhere, in the deep recesses of the mind, I recall something about “coreolis...

Get the ones that suit your purpose.

A couple of 2x6 and a come along work nicely!

Not really. It just morphed into a type of High Pay Grade ( self defined ) misrepresentation of science.

Really, travelling in waves on the mystical ether? ? The point was radiant energy does travel from the point sources it was emitted from. The emissions may be of variable intensity and frequency. Just simple bottom pay grade observations.

Radiant heat: energy particlues striking a solid object and transfering energy to that object. Conduction: transfer of energy between objects in contact with each other. Always high to low. Convection: energy being transported to other locations. THE LOW PAY GRADE version

This thread has well exceeded my pay grade!

Got dry Hard Clay?? Lots of horse power and a spiked tooth type cultivator attachment. More than a few passes as deep as can be done. Follow by discing, plowing, or a tiller. On hard dry clay a rototiller will take a bad beating. If the soil is wet you end up pulling a rotating tube of clay...

Be aware that if the tank installation is not up to the local codes the Propane supplier will not fill your tank.

Corrosion on the electrical cord where it plugs into the heater might be the problem. Failure at this point is not uncommon.

Ahh yes, the rusted up heat riser valve. The regulator should be sized to the flow rate. A needle valve and propane at pressure allows one to fill a metal bucket with propane Liquid.

On a 500 gallon tank a light bulb under the metal dome on the regulator is usually enough to keep propane flowing. If the flow rate is really high addition heat in this area may be required. There have been instances where fires have been lit under the tank at temperature below -40 F/C. For...

The sizzling is quite normal. The coolant has to be heated to circulate in the block.

Probably if you have the exact dimensions. Diameter and depth into block.

Soil test and then add proper ingredients plus seed. Then go over it a few times with a lawnmower that has detaching springs on the blades that scratch up and loosen the surface to spread everything more evenly.

Just curious, how many have actually seen treed land converted to farm land? There have been many acres converted by axe, saw, horses and an at least four horse breaking plow. My predecessors used this method. Later they made use of caterpillar tractors with a cutting plow up front followed by...

If it requires more than a crescent and three pound sledge I have a tendency to have it done!

what is the Railway blast you are talking about?

Ahh, but they do!

The best would be a road grader. Next comes a rear blade with gage wheels.

Perhaps the piston rings did not seat properly. Does the oil level drop?

The dipstick heater is worthless at -35C

Is the heater orientated the way the instructions show? Yes, there is a proper way.