Chainsaw Helmet shopping

[goeduck]

Any opinions on the Oregon brand helmets?

 

[ernemats]

I have had good luck with the hard hat from cutterschoice.com

 

[ericm979]

Looks like the ratchet version is $10 more. No idea on the neck guard, looks like they don't have one. Anyways, enjoy the new helmet!

It doesn't. I just got one of the ratchet models off ebay. I could not find one on Amazon. I did not fit the face shield to my regular slip rachet Husky helmet as I don't use them for chain saw work. But the Stihl helmet that I and my wife use for weed whacking finally got too worn out to use so I got the dial ratchet Husky helmet which can be adjusted easier than the slip ratchet model. The dial one does not come with the neck guard but I don't use that either so no loss. It also comes with what looks like a better head band than the plastic one on the slip model (which I replaced with a terry cloth one so I won't have sweat running in my eyes when it's over 60 degrees).

 

[Ford850]

With Ratchet - Model 592 75 27-01
From Bailey's - Husqvarna Functional Forest Helmet System with Wheel Ratchet

 

[Oldpath05]

I have had good luck with the hard hat from cutterschoice.com

So far this is the first link I never heard of, I had to google it with the right spelling but I tracked it down..............Now I'll check their inventory but still no neck guard on their helmets either, didn't realize that was such a rare item and I had one 20 years ago but I forgot what helmet it came with.
Cutter's Choice Online - Chainsaw Safety Helmet
with 3dB Rated Muffs

 

[wheelbuilder]

I'm happy with my Peltor setup.

 

[ovrszd]

Interesting read. You guys are serious about these. I've never, ever, ever considered wearing a helmet while running a chainsaw.

Sounds like there are plenty of good choices. That must indicate the profit margin is high.

 

[TractorGuy]

I just use my adjustable HF face shield with 3M ear muffs. If it's hot I might throw a wet hand towel over my head before I put the other two pieces on.

 

[goeduck]

Sounds like there are plenty of good choices. That must indicate the profit margin is high.

I do not know, I am amazed most of these places can manufacture and sell them for around $30. There cannot be a lot of profit in that :confused3:

 

[two_bit_score]

I think this is the one I have but mine was all assembled when I bought it.

https://www.amazon.com/7010-888-080...insaw+helmet&qid=1555647788&s=gateway&sr=8-29


TBS

 

[ovrszd]

I do not know, I am amazed most of these places can manufacture and sell them for around $30. There cannot be a lot of profit in that :confused3:

Missouri has helmet law for motorcycles. 40 years ago I was trying on helmets at the local store. Had just removed a cheap one and was looking it over when an elderly man walked by. As he passed he softly said "cheap helmet for a xheap head". I bought the better more expensive helmet.

 

[John_Mc]

Interesting read. You guys are serious about these. I've never, ever, ever considered wearing a helmet while running a chainsaw.

Having seen the unpleasant aftermath of some significant head injuries and how they affect the survivors life and personality, I will never consider operating a chainsaw where overhead hazards are present without a helmet.

No one plans to have an accident. In a lot of cases, having a fatal accident would be better than surviving a serious head injury and being that much of a burden on your family.

 

[atsah]

One branch smashing you're head is all it takes. I was cutting limbs one time and one under pressure snapped off and if my face guard wasn't attached to my helmet I could have lost at least one eye.

 

[Wagtail]

When I bought my first (and only) chainsaw, at my local Stihl shop, I went 'all in' on the safety gear to go with it = chaps, gloves and helmet.

Perhaps it was just 'luck of the draw' but the only Stihl helmet that they had available (it's a little town shop) had the attached face-shield, ear-defenders and the ratchet adjustment. Very comfortable to wear with the ear-defenders down.

I wear it when I'm using my branch chipper too... that's saved me from an injury or two.

 

[Oldpath05]

I'm not that big of a safety guru but when I started cutting wood 45 years it wasn't long before I had to many close calls and now I cant imagine cutting wood without a helmet and I definitely need eye protection!!!! Just this past winter I had some dead limbs coming down on my head, one if I didn't have my helmet on would've really hurt, maybe over the yeas I developed a phobia.

Just 9 days ago I ordered my helmet and tonight it showed up when I showed up, that seems fast to me coming from the UK. Anyway I do have is couple issues on this $40.00 helmet, the earmuffs dont like to stay in all the way on the last click or is that the first click, and I see no adjustment unless I go redneck, 2nd thing is there is a small spot of glue or maybe screen deformity of some sort. Maybe I should've looked for a helmet with earmuff compression adjustment, my first Husqvarna helmet had that 40 years ago, just turn a screw, I think that was the best helmet I ever had.

I took some pictures for reference in case someone else is looking for a helmet...

 

[atsah]

Hmm, my Jonsered helmet has a lot good things about it, the Labonville $40 helmet is even better. That spot of whatever it is on the face shield would drive me crazy..

 

[ovrszd]

I ran my first chainsaw when I was 16. That was 51 years ago. I've never ran a saw with a helmet on. Not bickering. Just clarifying my position.

 

[LD48750]

I do wear ear muffs & gloves....

Most of the time.

 

[goeduck]

I do wear ear muffs & gloves....

Most of the time.

I wear ear protection all the time and my hearing is still less than it was. Not bad, just less. Head injury is more binary.

 

[stuckmotor]

When I saw you wanted a neck flap I immediately looked to see if you were in a cool climate and sure enough you're in Maine. Down here in SC I wear an water saturated neck cooler on hot days. Would you soak the neck flap?