mogwild
Silver Member
Plus only one engine to maintain. I love my grasshopper. If the flail was $2500-$3000 I'd be all over it.
Agreed.Plus only one engine to maintain. I love my grasshopper. If the flail was $2500-$3000 I'd be all over it.
Agreed.
To each their own, but I've always preferred mowing with front mount equipment... and preferably without the engine and hood in the way.
I already have a utility tractor... but after mowing with the front mount Toro I bought last year, there's no comparison. Not having to look over my shoulder to trim or other places that require eyes-on mowing, was a real neck saver. I can only imagine the added 20% horsepower of the GH 930, combined with the ZTR mobility and lower CG.
I might miss the 4wd, but most everyone I've talked to says front mount Grasshopers are hill climbing beasts with the right tires.
Check out the PowerTrac 422 and 425. 4wd and excellent on hills as well as very maneuverable articulated tractors.
When it comes to mowing small area's and around any obstacles, those power trac's don't even come close to keeping up with a front deck GH.
SR
Indeed, that is my focus.For a suburban lawn that is undoubtedly true. I was thinking slope cutting and rough cut rather than maneuvering around scrubs. I thought the OP was focused more on that.
Indeed, that is my focus.
However, when it comes to reclaiming property (especially residential), many customers want to keep as many trees as possible. Many of them aren't even concerned with expanding turf area... they just want the undergrowth cleaned up. When maneuverability counts, accept no substitute for a ZTR.
Admittedly, if I could find a comparable flail mower for my small Toro (325D 4wd), I wouldn't have even found this machine.
The Power Tracs are nice, but they're huge compared to the Grasshopper.
They may be slightly more capable on hills... but given the trade-off, I'll take compact maneuverability over excess capability. Aside from the ability to run a boom mower, I really don't have a use for the PT.
Also, I've noticed some people talking about using a rotary cutter, and finishing with a different piece of equipment.
I like the single solution of the GH. I can drive this thing into my step van or straight truck, toss in the trimmer, and head to the worksite. The other suggestions require a trailer, two implements, tractor, and a LOT more time spent trimming.
Unlike most people, I prefer smaller equipment. The lighter weight means I can drive through someone's yard without fear of turf damage. It also means less soil disturbance/compaction in the areas I will be working. If the customer wants to expand their turf area, they won't be bothered with the expense of soil reconditioning (aside from a good broadleaf spray). Otherwise, they might as well have someone come in with ground engaging equipment to both clear and grade.
I've used rotary mowers. I have a bush hog and a finish mower for my Kubota. Even in open areas of tall growth, it usually involves mowing twice over... and I DISPISE doing something twice, when it could've been done right the first time.
I also hate trimming. It has to be done, but the more of it that can be eliminated, the better. Less trimming means higher productivity.
I'll put it to you this way...
My property is a long 26 acres. It lays in a creek valley. Most of it is featured... with ridges, rock outcroppings, creek banks, noles, and drainage ditches. Most of the properties in my area are mountainous and very similar (Blue Ridge Appalachians). Until now, I've been using a tractor/bush hog combo, and my lawnmower for the fencelines. I still use the bush hog for the creek banks. All in all, I spend an entire day just bush hogging the bulk of the open area, another day mowing the features, another day mowing the creek banks, and yet another day on fencelines, around the mill house/dam/etc. .
That's a LOT of time I'm wasting away from family, when I'm only home two days per week (truck driver). This doesn't include the side work I do for others, and any contract work.
For every two day's work outside of my occupation, that's an entire week away from my family... and equipment count is a whole other ordeal of time in maintenance.
The way I see it, this is pretty much a one and done solution for 95% of what I have been doing with five pieces of equipment (not counting the trimmer). Also, it's 100% of the side work I contract away from home... so I just eliminated a trailer (or at least, a lot of trailer size requirement), four pieces of equipment, 1hr of prep work before leaving to the jobsite, and a LOT of maintenance.