Recently bought a 1710 4x4 with FEL (Ford 770A). Everything works but the rear hydraulics are very weak. The arms will raise and lower but if you put any weight on them (even my 230lbs. Dad) the...

Hello, I'm kind of new to my old tractor and started having an ignition problem today. At problem start glow looked to be working but all that happened when attempt to start was a solenoid...

Here's a quick look at the rear valve I added to my 1710. New Holland parts shows that the remote kit for this model is no longer available so I had to come up with a custom solution. I see a...

Hi Everyone, A while back I posted some pics of the rear remote valve I made for my 1710. See the last pic below, and here's a link to the original post...

I figured I would start a new thread since it is a different topic. JC sent me a picture of where to change the oil in the injector pump. Mine is not the same. I have the fill plug, but the...

Just picked up this Ford 1710 and the WSM will be delivered this week. I've read a lot on this forum and I have a lot of respect for all of you. Tractor: Early 80's Ford 1710 Cause: Previous...

Greetings folks, Hope I posted my issue in the correct forum. I own a 4x4 Ford 1710 tractor. UL06201 Unit #4J13B. I have never has any issues with any part of the tractor (except water pump)...

My BIL is looking at a Ford 1710. 27 HP, 4WD. It has a FEL, brushhog, boxblade and post hole digger with at least 1 auger. It has 700 hours on it and the paint and body appear to be in good...

My ford1710 pto does not turn when engaged but when it does turn you can easily stop it with your shoe. If the tractor is on an incline it will turn. Any ideas?

Hello, I'm in Maryland right now and we have quite a bit of snow on the ground with more on the way. I'm house sitting for my parents and the only way I can get out of here is with my fathers...

Does anyone know of a replacement brand or have a model # of one they bought for theirs? I'd love to be able to order one from napa or get one from an auto parts store vs having to drive 90 miles...

I picked up a 86 Ford 1710 4x4 with 770a FEL and a 758a backhoe . Mechanicaly everything Is good. Plans are to change all the fluids and filters, has around 2000 hrs on it. I paid 8k for it with...

Hey guys I have the opportunity to buy a nice Ford 1710 tractor with only 520 hours on it from my boss who's selling his house. He'll sell it to me for 2k, this will be my first tractor. It has a...

Looking at buying a Ford 1710 4WD with FEL all 4 new ag tires and 1500 engine hours,the price is $8500 My concerns on this model are as follows: 1. hydralic speed in cold weather (for FEL) 2...

Hello Guys, I will be the first to admit I only know the basics about Hydraulics. So I am looking at installing a 7108 loader and control valve on my Ford 1710. Where I am a bit confused is that...

Hi im a new member, just got time to work on my 1710 3 cylinder diesel, water pump was leaking and tons of play in the water pump shaft. Soaked all the bolts for a few days with penetrating oil...

Guys - I bought this tractor in December and love it. I offered to use my backhoe to help out my 80 year old neighbor and dig a drainage ditch for him. Well - of course something goes wrong mid...

Hi, I had asked a previous question about a starting problem with my Ford 1710 tractor. At that time the tractor was cranking but not starting. I used the helpful advise I got on here to fix the...

I have googled/youtube'd just about every where. I need to know where the actual switch is located, internal or external. I have traced the two white wires to the switch and tested in neutral...

Hi, Looking for a little help with my old tractor, a Ford 1710. Haven't started it in a year and it needs a new battery. Hard part is it has an old aftermarket bucket on the front that doesn't...

I have a new to me Ford 1710 and I just changed the hydraulic fluid/filter. My FO-44 manual says that the final drive is lubed by Hyd fluid but no fluid was present. Should there be hyd fluid in...

Hi, I have a 1986 Ford 1710 with the Shubaura H843 engine. The crankshaft has broken near the 3rd (rear most) connecting rod. I have already bought the new crank, bearings, etc. Does anyone know...

I have a 1983 ford 1710 4wd and there a mystery piece welded on the 4wd lever as pictured. Doesn’t let it go fully down. Could there have been a problem before I got it? Is it bad? Thanks...

I've been trying to decide which of these to buy, you have to be flexible sometimes when you set your sights for a tractor. Is either of these tractors preferable to the other?Dollar for dollar...

I have a ford 1710 that i used today for about 10 minutes. I backed it in to where i usually park it and now it wont move at all. I have tried every gear and it doesnt do anything. I can...

I have a 1710 Ford with only 550 hrs on it and I noticed green coolant leaking out at a pretty good rate today. I ran it for about 3 hrs and hopefully caught the leak in time before it caused any...

Well, we needed a second tractor in the same hp class as the Kubota L3200 to help with various tasks around the farm so we didn't always have to swap 3pt implements as well as for manure...

I have a Ford compact tractor model 1710. It has high hours but works well with one exception. It has a twelve speed transmission, with two shifters side by side: The right shifter is of the...

Hi, I own a Ford 1710. Had it for a few years now. Has an aftermarket loader and backhoe, 4wd. Excellent little machine in general. Not pretty but does a great job and pretty much unbreakable. I...

I intend to install r4 tires and wheels on my 1710 4wd tractor. In order to accomplish this, I need to know the actual height of the factory installed turf tires, both front and rear. Could...

I have the 1710, with the 3 cylinder, 1.4L Shibaura H843 engine, with a spun rod bearing, and a cracked cylinder head. Engine has new injector pump and timing gears. I am not finding parts to...

I'm looking at this Ford 1710. I'd welcome info and comments on it. What would be a fair price? The bucket has holes rusted through in places and the tires are weathered and cracked, but have...

I keep forgetting to turn off the key when I shut off my diesel. I want to add a 'buzzer' when the engine shuts off and the idiot lights come on. Probably an LED light but would a 12v buzzer go...

Prior Planning Prevents Piss Poor Performance (PPPPPP). Marine expression I got from the kids, 2 were in the Crotch. So, last night, in preparation for the ongoing storm, checked fuel level...

Hi, i have a ford 1710 that had a old temp gauge stuck on hot so I replaced the temp sensor and installed a new temp gauge that stays on hot as well right out of the box. I am new to this site and...

Hey everyone. So I have a bit of an issue. I finally got to putting my 1984 for 1710 tractor project back together after rebuilding most of it. It starts and runs great now, but the voltage...

Hi all, I've been reading the forums for the past couple on months and am close to buying my first tractor. I'm looking at a well cared for Ford 1710 and need some advice... I've looked at a...

I recently purchased a 1710 that replaced a broken in half Ford 1600 with FEL & BH. I am now in planning stages of modifying and installing a sub-frame from the 1600 to beef it up and make it...

Just wanted to say hello to all,and have a great day.

My cold weather start assist stopped working. I checked the glow plugs with an ohm meter, and they test good. Voltage at the glow plugs is only 2 volts. Voltage to the glowing resister wire on the...

Hello, all. First post as a new member, but i have been lurking here for a couple of years. I have learned a lot from this forum and you all have helped me to make decisions regarding my...

Recently while running the rotary cutter on my 1710 the 3pt dropped and would not lift. I noticed the hydraulic fluid was milky so I drained and replaced fluid and filter. 3pt still wouldn't lift...

Just bought a 1710 today for 3k. I think I got a good deal, what ya think? 1600 hours 4 wheel drive, tires fair, fronts a little cracked Front end loader 50 inch tiller....he said a tad small box...

My 4x4 diesel 1710 (acquired with the house I bought, history unknown, but definately not well maintained) is having a fuel injection pump problem. I've got fuel to the pump and over to the pump...

I have a ford 1710 4x4 with power steering that I just recently bought and I have been fixing it up. The final problem that I have been having is that the clutch will not disengage to all the...

When replacing the headgasket, I noticed a small hole in one of the cylinders. See uploaded picture. Anyone knows how I can get such a nice little hole in one cylinder? Is it supposed to be...

Where can I get a rim for a rear tire on a Ford 1710?

Hey guys I have the opportunity to buy a nice Ford 1710 tractor with only 520 hours on it from my boss who's selling his house. This will be my first tractor. It has a front end loader and 4 or...

Hello all I just purchased a Ford 1710 and according to the coolant temp gauge it is overheating. I used a temperature probe and the coolant was at 210 degrees at the radiator. I do not have...

Hello all. My name is Paul and I have just acquired a 1986 ford 1710. I bought this as a project knowing the tractor had been sitting for awhile (I was told 1 year, but anybody's guess how long)...

Hello, I have a Ford 1710 and I just finished rebuilding the engine. The tractor is back together and it won’t move while in neutral and I can’t shift all the gears. This is the first time I’ve...

I recently purchased an '84 Ford 1710 4X4 (1600 hours) which appears, at the least, to need a clutch, i.e., it barely pulls itself forward or backward. My question is whether this tractor has a...

Good morning all. Thanks for all the useful information in the years past. I finally decided to "join up". I just bought a rough but very good running 2,900 hour 2wd Ford 1710 loader backhoe...

I bought this 1710 with the cab heater in it. The location of the heater is in a BAD spot. If I hit a large bump or stop suddenly I smash my head into the corner of the heater. I want to remount...

I am considering buying a Ford 1710 4x4 with FEL, finish mower, and extra set of turf tires for $7500. It has 1309 hours and looks good. Very minimal rust, no leaks, etc. Currently there are ag...

Will the 770b loader only operate with the 3 point in the raised position? Is this correct? New to a tractor with a loader.

I have the opportunity to pick up this tractor for 5800.00. Everything works as it should and it has 1100 hours on it. Is it worth it?. 12 speed with live pto.

In trying to avoid the big bucks on a new tractor I have come across a 4wd 850 that looks pretty good. Can't seem to find out much about the series and tractordata.com shows only 22 pto hp which...

My 1986 Ford 1710 has been having an intermittent problem in its' final drive. From time to time, the left wheel locks-up. Generally, it will reverse with no problem, but it will only go...

Does anyopne know what the rpm's are on the front PTO on a 1710. I am thinking of changing my front mount 715A snowblower to a rear mount. I have read posts stating that it turns much faster...

I bought a Ford 1710 with the Shibaura 3 cyl diesel. Changed the oil yesterday using the crankcase capacity in an owner manual I bought, i.e. 5.6 qt with filter change. After I changed the oil and...

Can anyone tell the valve clearance adjustment and which order to adjust on a ford 1710?

I fear my injection pump has gone south. I have good fuel flow to the banjo fitting inlet, but with all injector lines off, it barely spits fuel from the outlet ports. I've tried to remove the...

I noticed when I was putzing around with my 23 year old "new" tractor that the seat was pretty wobbly (Never noticed this driving around the smooth lot at the dealer) I looked under it thinking...

I have a 1985 Ford 1710 that has spun a rod bearing! :mad: Upon disassembly I have also determined that the head is pretty bad shape also :eek: I need to locate either another engine, a...

Hello, New to the forum and tractors, nice site. I have married into a 1710 that is beat up pretty badly but still runs like a champ so I am trying to keep it working. Three weeks ago I started...

I want to install a block heater, but not sure of the size or which freeze plug to pull. Any information on size and location is greatly appreciated. Bob

I thought I'd post this and see if anyone else had a similar failure. The MFWD quit working a few months ago and I finally got to fixing it. On the 1710, the front drive shaft is splined on...

buying a ford 1710 I'm looking at a Ford 1710 with a Shibaura engine. I dont know anything about these engines. Can anyone tell me good or bad points to look for in these.

Good evening friends. I have an issue with my Ford 1710 tractor. I started my tractor this afternoon after a long cold spell here in upstate NY without issue. Plenty of battery and only 30...

Dang. Tried to do some grading yesterday and the 4wd won't engage. It was working until I left it in 2wd while doing some fork work. I recently drove 10 highway miles, but in 2wd. There is a...

Sometimes it starts, sometimes not while shifted into neutral. Did a search, checked the manual and even Youtube. Where is the rascal, gonna troubleshoot it and fix it, not bypass it.

Hello all, Could use some help diagnosing my beloved little 1710. It starting running funky a few months back. For a while, it was very intermittent, and I assumed a bad tank of diesel. But...

Thanks to JC and everyone else that has responded to my previous posts during my purchase of a 1710. Now I have it home and have been using it for about 3 days now. I have several concerns and...

I recently bought a Ford 1710. I found an owners manual for sale for around $30.00 plus shipping would be around $35. Would the operators manual be worth getting? Or does anybody know where I...

I took a few pictures of the areas where I have questions. I will integrate the questions with the pictures eventually. 1. broken "L" bracket on right hand side holding hydraulic line against...

Looked on T-House and the price seems to be pretty reasonable but I would like to hear from actual owners how well these tractors run and hold up. Guy has a Ford 1710, mid '80's, 2000hrs...

Hey all, A neighbor of mine has an oil pressure problem with his 800 hour 1710, Low pressure when it warms up. This tractor is in pristine condition, Any known issues out there on these? I did a...

Where can one find a crush washer for ford 1710 fuel injector?

looks like the water pump on my tractor gave it up. it seized. heres hoping a replacement is readily available.

I need to replace the front dr. shaft, input housing on front differential and the driveshaft cover tube, any help appreciated, looks like I need to remove the piece that it coneects to at the...

Looking for some information for adjusting the valves for the 3 cly Dsl engine. My tractor blows a little oil, blow back. will adjust the valves and check the injectors. will change the oil and...

Hello, I have no tractor experience. I bought this tractor to mow 6 acres and groom 34 acres of wooded trails it is 4wd and has a front-end loader, it has 480 hours on it. original paint and it...

I have a 1710 Ford Tractor. I want to know, can I add a remote Hydraulics for the rear of this tractor? It has already a front end loader on it now.. Thanks

Hey guy's hope I can get a few quick response's, my 1985 1710 diesel had waterpump start leaking yesterday, dealer want's $120. for his aftermarket pump, can get 1 on ebay for 65-80. has anyone...

The PTO on my 1710 does not disconnect when the clutch is depressed. I got the tractor used and don't know if it has a dual action clutch, but no matter the adjustments I can not get the PTO to...

My 1710 Ford front loader lift has no power. Actually it won't even lift without red lining the tach unless I fully raise the 3 point hitch. Then when the 3 point hitch is raised the front...

I have an '85 Ford 1710 and the rear wheel broke off. Does anyone know where I can get a replacement rim and hub? Thanks.

Hello fellow tractor lovers, My name is Troy, I live in PNW (Washington state) and recently purchased a 1710 Ford with a front loader, front snowplow, disc set-up anda 3 piece harrow for $4500...

Im looking at buying a Ford 1710, tractor seems to be in good cond, runs good, 4wd, has a loader, 1390 hrs, the only issue I see is the pto grinds when trying to turn it on,,, , I can turn the...

Hi I hope I am posting this in the right spot, I am new to this site and will bring my experiences to any of you in any way I can I have owned many machines and trucks and been through it all I...

Hi, New guy here. I bought a 1710 Ford with a FEL and 4 wheel drive a couple years ago. It was rough with a torn up transmission and various other issues. I broke it in 3 sections, rebuilt the...

Getting ready to do an over-all fluid change on the 1710. The manual mentions adding "oil to the injection pump" every 100 hours. It says add 5 ounces of engine oil to injection pump!! Is this...

I have an integrated New Holland backhoe, model 757B installed on my 1710. The backhoe uses the tractor hydraulics. The leaks started all of a sudden. With all of the valves centered (not being...

I am looking for a compact tractor for small horse farm maintenance and snow removal. I saw a 1986 Ford 1710 with a loader and 4x4 for $5850. It looks used and is for sale by an excavation...

How does this device work? The control is located on the instrument panel but there is no knob or switch extending it out. It looks like there should be something else. What is missing? I...

I have have a decently big problem on my hands. I checked my front axle oil and there wasn’t a drop of oil in it. That has probably been running like that for a while. For the people who know...

I have a ford 1710 diesel 2WD and it started losing power as the tractor started getting up to operating temp. I did the fuel filter and fresh fuel with no help. I drained fuel ,removed tank valve...

I live in South West Florida between Sarasota and Fort Myers. I recently purchased a Ford 1710 tractor with blade and loader. The first thing I did was purchase the (genuine) Ford shop manual as...

Does anyone know if any Ford 1710 tractor engine parts are interchangeable with a John Deere or even a Kubota, and if so what models of John Deere or Kubota tractor are compatible with a Ford 1710...

Does anyone know of problems with the Ford 1710 diesel engine? I have the opportunity to buy a 1710 with the farm I am buying. As I was doing some research I ask a friend who is a garden...

i think i have the number right, 1984 model, 4wd, fel, 1800 hours: went for about $6000 at an auction this morning. probably a good buy but more than i want to pay for one with that many hours on...

Hello, Before I hear about how unsafe this could potentially be, I know. That doesn't change my interest in making it happen. I have a 1986 Ford 1710, 4WD, ROPS, 770B Loader, 60" bucket. I...

I’m looking for advice on repairing a hydraulic leak on a Ford New Holland 1710 tractor. I’m pretty sure the leaks are originating from the controls for the bucket. I replaced the hoses thinking...

Can anyone assist with advice on how to wire up the standard fit temperature gauge to my Ford 1710 ? I suspect the thing has been incorrectly wired by a previous owner so I have removed to check...

I just got done rebuilding my motor: new pistons, rings, and bearings. Reason for rebuild was a spun rod bearing. Other than that, the engine was running good. I didn’t do anything with the...

Need to locate a replacement head or complete engine to repair or replace my Shibuara 3 cylinder diesel. I have been searching for quite some time, almost a year, with no luck. :confused: So...

Hey, I have a 84 Ford 1710 and recently have been having issues with the three point settling once the tractor is shut down. Seems to be specific to the three point as the loader stays up just...

So yesterday I was getting a new front tire installed on my 1710 front rim at the local Kubota dealer (the nearest New Holland dealer is 60mins away). So the guy mounting the tire is asking what...

Background: >Trying to help replace a clutch on an approx. 1984 Ford 1710 4x4. >Planning on splitting the tractor in the next weekend or so. >Have the Ford service manual >Have general...

Hello I have a Ford 1710 tractor. What is the proper engine oil for this tractor? Best Regards

I just purchased a Ford 1710 (model AL3136). The bucket is extremely slow to raise/lower. The former owner said he had tried to pull a stump out and the hydraulics have not been the same since. I...

I've noticed that my oil appears to be "coffee with creamer color". I believe it is water. When I drain the oil I'll put some in a clear jar and let it sit to see if it separates into oil and...

Hi, I have an old Ford 1710 4x4 tractor with an after market front end loader and backhoe I bought about 10 years ago. Tractor still runs great after almost 40 years and fortunately has needed...

I would like to know if someone can tell me how to adjust the breaks on my 1710 tractor?

I currently have Turf tires and want to change to AG. Are there any aftermarket/compatible wheel centers that can be re-drilled to put on the 1710 rear wheel ?

Have a Ford 1710 with 1500 hrs .When my new KK Finish mower is attached to the PTO, the PTO makes a Heck of a grinding noise when you try to engage it. With no mower attached there is no grinding...

Hello ! What is a fair price for a Ford 1710 4wd, 1982 ? Can someone give me help with this ? Br Tomas

Why does the 770 loader start to raise up when the downward float is engadged ? It only does that when the 3 point lever is in ful raised position .

I am borrowing a Ford 1710 tractor, and the hydraulic lift operates backwards. When the control lever is pushed down, the arms raise, and when pushed up, the arms lower. What would cause this?

A few weeks after buying my 1710, the pilot bearing gave out. Great timing by the seller... I thought I'd attach a few pictures of the bearing. Sorry for the blurry one.

First timer! I am looking to purchase a 1983 ford 1710,4wd,loader, I have been able to find all specs on the tractor except the ones on the loader. Load limit?, bucket height? If there is anyone...

Note...I did not see a means to attach a pic so I posted it online and here's the link. I took the top 15a and bottom 3a fuses out for this picture. The two middle ones don't seem to have any...

I haven't been able to locate a cylinder head for my ford1710 . I have a local shop that can do a proper repair but the crack is between valves and I can't find either seats or a rebuilt head for...

I need a little advice here. I am looking to buy my first tractor and I found a ford 1710 w/FEL and 1300hrs on it and a farmtrac 300dtc with 850hrs on it that fit in my budget and and my...

How do, I have a Ford 1710. The problem I am having is that the three point hitch lift arms will not go up when you move the lever. All of the settings are where they should be and yet it...

Did a full fluid and filter change 10 hours ago when I replaced the clutch. Today I was moving some dirt and decided to work my gravel driveway. Our driveway is pretty steep, I went to the top and...

I need help! I bought this 1710 with a loader a few months ago. The first time I used it the hydraulics quit after a couple hours. The fluid had a lot of water in it. I changed fluid and filter...

My dad has a 1985 ford 1710 that he has been wanting to get a bucket for. The tractor did not come with the front loader attachment when he bought it years back. Now hes wanting to get one. The...

Bought a new toy day before yesterday and got it running yesterday, its a Ford 1710 and it runs good, I have noticed a low rpm knock or rattle anywhere below 1200 rpm, once I increase the rpm's...

Getting read for fire abatement here in Southern California. Finally getting around to putting a new seal on the 3 point piston. If I dropped the throttle to idle or shut the engine off, the...

Does anyone know if any Ford 1710 tractor engine parts are interchangeable with a John Deere or even a Kubota, and if so what models of John Deere or Kubota tractor are compatible with a Ford 1710...

Need to know if a tie-rod and tie-rod ends off a 1910 ford will fit on a 1710. Thank's . bud ford.

Need help I have a ford 1710 with a bad motor will a 1910 fit or will parts from the 1910 fit the 1710. They look close might be only be the cylinder bores difference thanke

Good day every one. I am wanting to buy a ford 1710 standard. However I would like to make it a high crop. I know I and buy the offset model I however would rather have the normal tractor but the...

I have a Ford 1710 and a 2110 compact. Need to replace steering wheel on 1710 and have extra 2110 steering wheel. Any one know if the 2110 wheel will fit right on the 1710? At my age it's a lot of...

Does any one know where I can get the decals for my 1710 I need the main one on the hood w/ the 1710 logo Thanks Bartman

My brakes are going out (and can't be adjusted anymore), but I only have the users manual. What will I find when I open up the nicely covered area that hides the brake pads? And once I open it...

I am loking at purchasing a CUT. I went to look at a 1630 FWA yestrday but it had been sold. I dealer has a 1710 FWA coming in next week with less than 1000 hours a loader and a 5 ft bushhog for...

I feel dumb asking this but I'm 40 miles away from the farm. Can anyone tell me the type of quick connects used on the 770B FEL to the 1710? Thanks.

I have a 1983 Ford 1710. I am replacing the exhaust pipe. I purchased the exhaust pipe/exhaust manifold gasket, its stainless steel. Do I need to put any kind of gasket sealer on the gasket before...

Did a full fluid and filter change 10 hours ago when I replaced the clutch. Today I was moving some dirt and decided to work my gravel driveway. Our driveway is pretty steep, I went to the top and...

I'm looking for either a 1987 or 1988 Ford 1710 Offset tractor... does anyone out there know where I can find one? I currently own 3 1710 offsets.. an 85', 86' and 87'.... I've been on...

The dealer sold me engine oil filter #87415600, but New Holland's website says #86546618 or 86546618DS (not sure of the difference, or what DS means). So I was thinking the new number replaces the...

3 point hitch seals, o rings 3 point hitch hops

Just bought 1710. With motor off, PTO engaged, shaft will turn clockwise but not to the left. On my 1920 and 2110 Fords, PTO engaged and motor off, the PTO will not move at all. I know the 1920...

I figured I should start this over in the Owning forum now rather than the buying forum. JC, hope you get this, but here's a new one. I am reading the FO-44 for tranny filter and oil change on...

I need a freeze plug heater for a Ford 1710 Tactor the bore is 1-5/8". I have bought 3 different ones to no avail I need help.

My 1710 has about 1000hrs and the hydraulic system seems weak. It has since I got it with about 800 hours on it. I use a 5' Rhino SE5 rotary mower and have a Ford loader on the front. Although the...

I am changing the fuel filter on a ford 1710. It came with a spring where does this go? I did not see this spring when I took filter off!!

I've recently been working on getting an old 1710 running that I intend to purchase from a family member. One thing I've noticed is that the PTO when engaged does not stop turning even with the...

Am trying to help my dad's neighbor figure out where to find some new rocker assembly hold down bolt/studs. As I understand it there are 4 studs holding the rocker arm assembly to the head and 3...

Hello Ya'll, I started doing a little sand blasting today and started on the swing arm's, and can see the ball joint's in the end of each arm (lower) are worn out, can't really tell by looking how...

Hi i have a 1710 that is not delivering fuel to one of my cylinders. I traced it back to the pump. I disconnected the high pressure line and ran the starter. Nothing came out. I did the same with...

I will post this even though I feel a little foolish. I had a guy run my 1710 out of fuel. I had done this before and because I knew what was happening I had shut it off very quick and got it...

I just purchased an old used Curtis universal cab with side curtains. I am trying to see if anyone has ever installed one of these before and maybe give me some tips? Thanks John

I have a 1710 that is running rough and I suspect it is a timing problem. I have not been able to identify the number one cylinder. Can anyone help, front or back? Thanks

Hello, new to site. I have an 86 Ford 1710 without draft control, with a 770 loader. I have a Fisher power angle plow mounted in the bucket and the Fisher valve body mounted to control the power...

Hi, I was out brush hogging today and notice my ford 1710 was building pressure in my gear case and was bubbling out at the seams. So I unscrewed the filler plug and it had a lot of pressure. What...

I recently bought a 1984 Ford 1710 with 4 wheel drive and a loader. The loader works fine. The PTO does not work. I can engage it with the clutch not engaged. The PTO will barely turn but you can...

any one got one laying arond clecting dust

Hello, I have a Ford 1710, Shibaura H843 Engine Tractor and I need Fuel Injectors for it. Does anybody know where to buy these parts? Thank you for your help.

Wondering if anyone else has had this failure on their 1710: You can see from the picture that the cracks propagated from the spline roots. I mostly use the tractor with the loader so there's a...

Hello all, I need to change the head gasket on my Ford 1710, 3cyl diesel. I am looking for a good source to purchase the head gasket set from. Does anyone have a source? Also, do I have to...

Cleaned up a bunch of grime and slime. Used foamy engine wash, scrub brushes, floor stripper detergent. After it was mostly cleaned up, I turned on the engine for just 1 minute. The leak squirted...

Any advice on Brand or type

I have a 1710 Ford tractor. I am getting ready to change the Hydraulic Oil tomorrow or the next day. Does it hurt to use an off brand oil, or should I stay with what Ford Dealer has to offer?? I'm...

I have a 1985 1710. The loader has worn out spool linkage. Does anyone know of a Ford parts dealer near my local area? I live in Tioga County, PA

Does anyone know the difference?

I am looking for some front rims (2 wd) for my 1710. Have turf tires and am wanting ag rims. These are 6 bolt, and look like about 3 1/8" center and about 4 1/2" from center of 1 bolt to center...

Hello! I was using the tractor to move some gravel and it overheated. It smoked and barely moved. We replaced the battery because that was no good. Tightend the fan belt, replaced the coolant...

Hi All- I am stumped by an electrical issue on my 1710. I have verified that the battery, solenoid, fuses and starter all work. When I turn the ignition switch to start, I hear the click of the...

I recently purchased a 1988 Ford 1710. The previous owner disclosed to me that when he wants to use the PTO he turns the tractor off, engages the PTO with the lever, starts the tractor up and the...

I have a ford 1710 with a 2240QT bushhog loader that works fine with empty bucket.When i get bucket load full of dirt it curls up fine when dumping it seems to stick right before load is fully...

I have a ford 1710 that over heated and is leaking antifreeze behind the fuel injection pump. Is there a freeze out plug behind the pump? It is also knocking. Changed the oil and filter and found...

I have a 1710 without loader. Rear hydraulics will not lift! I blew air down the rubber hose low-pressure tube to clear debris and it would work great for a few minutes. I drained hyd fluid and...

I am looking for the following parts for my 1986 Ford 1710 4WD. The front housing weld broke and the front wheel drive was damaged. The parts are no longer supported by Ford. SBA322010170 Sump...

Does anyone know where I might be able to purchase a used transmission dipstick for my Ford 1710 four wheel drive? Attached is an image of what I'm dealing with. I've had the tractor for a few...

My 1710 has about 1000hrs and the hydraulic system seems weak. It has since I got it with about 800 hours on it. I use a 5' Rhino SE5 rotary mower and have a Ford loader on the front. Although the...

I have called around and so far no luck. I am looking for a set of used turf rims for my 1710 4wd. Does anyone have any they are looking to sell OR know of a set somewhere? Front tire size...

What's a good price range for a 1710 in good shape with 950 hours? No power steering. Any reason I would'nt want this tractor? Thanks, Fred

I have a 1710 with fel. All I want is to operate log splitter. Can I run a hose from loader valve to back of tractor with quick connect on end. Then run return another hose back to tractor? I...

I have an opporunity to purchase a ford 1710 with snowblower but the front pro is bad. whee can I get a replacement front pto?

I just picked up this this skiploader and noticed that depressing the clutch does not stop the PTO , and yet it wants to disengage under any load (snow blower). Any ideas as to where I might...

Can anyone tell me the speed of 1st gear of the Ford 1710 tractor. I want to use it with a rear end tiller and want to be sure it travels slow enough to do a good job. Thanks for any information...

how do I pass the mower deck belt to the rear pulley on a ford 1710

Looking to buy adapter plate and spool valve for 1710 ford

Just got a ford 1710 4x4 tractor with 965 hours on it. has a 770 loader and a bradco hoe. Hoe was bolted to the rops with some bad engineering, worked for years until the bolts got loose and broke...

Hello ... looking for a drive shaft for the 4wd to the front wheels ... Ford 1710, 3 cylinder, compact tractor, diesel (made in Japan) Part # SBA322511210 Can anyone help???

Long story short, thought my fuel intake at the injection pump was leaking because the fitting was loose, come to find out it was cracked in the threads, went to tighten it us totally broke it...

How do I access the dash wiring on my Ford 1710 tractor?

Hello, I have a ford 1710hc and the machine was recently run in the rain. After pulling it into a shed, I shut it down, but may have left the ignition on. The next morning, our guys couldn't...

Hello to all. I have a Ford 1710 tractor and I lent it to a neighbor:eek:, I now have a tractor that has water coming out of cylinder number 3 Hence I found this forum. I still love my tractor it...

I need a front grille for my 1720, but all I can find listed on line are grilles for a 1710...will that work? Many Thanks!

I've got a ford 1710 that is leaking antifreeze behind the fuel injection pump and knocking. Is there a freeze out plug in that location? There is a knocking also. Changed the oil, no metal...

will a ford / new holland 914 A mid mount 60" mower fit on a ford 1710

Does anyone know what size the elbow adapter is on the bottom of the power steering valve on a 1710 tractor? I had a leak from the compression fitting and took it off to fix it... and then lost...

Does anyone know where I might be able to purchase a used/salvaged transmission dipstick for my Ford 1710 four wheel drive?

I am going to need to replace clutch on my Ford 1710 4wd. I think I can do this my self ( with help ) and save a ton of money. My question , is there anything else ( seals on front drive shaft...

I am thinking putting a 1986 1710 4X4 frt axle in another tractor and need to know what ratio it is ? How many turns of the pinion shaft for one rotation of the wheel ?

Need an injector pump shaft seal and fuel line that runs from the fuel filter to the injection pump + the return fuel lines. for my 1710 Ford Tractor. Anyone know where I might find these parts...

moved to ford forum

So, I have been driving this tractor around for a few years, when it is warm, I see bubbles forming from under the 4 wheel drive shift lever. Blown gasket? Take the cover off, and see that the...

Hello All, I have posted in another forum about my issue, so if I get in trouble for posting someone let me know, I originally posted in general repair. My Ford 1710 has a tph that will not...

I need a used grill for a Ford 1710. If anyone has one please contact me at 859 588 4275 thanks lester

where can I get a replacement front pto for this tractor?

I have a friend who had the steering shaft break on his. A new shaft is $730 from Messicks. I found a used one online for $750 (I asked why he was higher then new and he said the part is...

will a 914 A mid mount mower 60" attach to a 1710 ford THE DEALER TOLD ME YES BUT I CAN'T FIND ANY REAL INFO EXCEPT THAT 915 WILL FIT THANKS MIKE

I have a 1986 1710 Ford 4X4 tractor. It has recently developed a hydraulic leak. It appears to be coming from a seam in front of where the range/gear selector shifts are at. When im driving the...

Hello I have a question on my tractor, maybe someone can help. Its a Ford 1710 model # AL3136. Can anyone tell me what options my tractor had by the model number? Live PTO, dual clutch etc..? Thanks