Yanmar 2310

[rorygeorge]

I have a Yanmar 4x4 tractor and first the 4x4 quit working then the three pt hitch quit working. What's up? I check the screen and it was clean, reservoir level correct. What else could be happening. Thanks Rory

 

[HoyeTractor]

There is almost no way the 2 could be linked. I think you are looking at 2 completely different problems that you need to troubleshoot independently. Are there any other symptoms? Do you have a loader on it?


Aaron
Parts@HoyeTractor.com
(940)592-0181

 

[rorygeorge]

Aaron, yes it has a loader and it is working fine. ?

 

[LMTC]

The only "link", if there is one, would not likely be mechanical, but rather the source of the tractor; otherwise it is a random coincidence. Is this a recent purchase? Does the seller claim to be a "dealer"?

 

[rorygeorge]

I bought the tractor from and individual who bought several to make some money. He was selling out and moved back to Texas so there is no local dealer to question. I purchased it a year ago with all new implements etc and everything worked fine.

 

[lens12]

First check the control valve/3 point sensing linkage. Next would be trouble shooting the control valve & lift cylinder. It would be helpful to know how the loader is plumbed. 2 hose or power beyond?

 

[EFC]

Is this a YM2310? In your other posts it says you have a YM2210. Big difference between the two.

Does your 4wd lever move without resistance?

Buck

 

[rorygeorge]

The tractor is a YM2210BD sorry for the confusion. It has two hoses to the bucket for lifting and two for tilting. 4x4 lever move freely. Thanks

 

[MJPetersen]

What he meant when he said that the he needed to know how the loader was plumbed is number of lines beyond the 4 to the loader. Are there 2 (6 lines total) or 3 (7 lines total).

Tackle the problems one at a time--you have a good tractor and if it ran for a year without problems then it can probably be fixed to run many more. You have several very good dealers helping you in this thread.

Mike

 

[rorygeorge]

The tractor has 6 hoses coming off the pump. Does that help?

 

[HoyeTractor]

Does the loader appear to be plumbed in like this -->

Koyker loader install on a Yanmar

Or is there a third hose going back to the tractor?


Aaron
Parts@HoyeTractor.com
(940)592-0181

 

[rorygeorge]

Aaron, I'll have to get back to you next week. I'm not where I can look at it closer until then. Do you know of a mechanic in AZ if I can't solve the mystery?

 

[rorygeorge]

I'll post some pics. Email sent to Aaron.

 

[rorygeorge]

I'm still have 3pt problems. Anyone out there have a suggestion? Thanks!

 

[runningbird]

sent you a pm
mark

 

[rorygeorge]

IT looks like the 2210 is on the mend. Ujoint problem was the 4x4 culprit, control valve for the 3pt. Thanks for the help.

 

[greatrandini]

Say if you look at your last picture it shows a backwards hook that sticks up from the back of the tractor behind the seat. What is that used for? I always thought maybe it was to hold the toplink but it is backwards? Are we missing something?

 

[California]

Say if you look at your last picture it shows a backwards hook.

It's the transmission's vent to the outside atmosphere. Don't hook to it, it will break off.

 

[greatrandini]

Thanks California but how does it work? I don't see how it can vent?
Is that hook hollow? I never noticed.. I will check mine out....