welding helmet

/ welding helmet #1  

sal64

Platinum Member
Joined
Mar 5, 2009
Messages
541
Location
ny orange county
Tractor
jd 2320 jd 990 jd950
hello all I have one of those auto adjust welding helmets is it safe for viewing the eclipse? thanks
 
/ welding helmet #2  
If it adjusts to shade 12 or greater you can use it to view the eclipse
 
/ welding helmet
  • Thread Starter
#3  
thanks for the response it does adjust to 12 im not familiar with this type of helmet if I look at a light it doesn't go dark if I get close to a light and turn it on quick it gets dark so if im looking at the sun will it darken abit? it is a little dark already like torch goggles
 
/ welding helmet #4  
Really you want to trust your eyes to something you know nothing about? What if you don't cut it on quick enough when looking at the sun?
 
/ welding helmet #5  
If it has a sensitivity adjustment turn it all the way down. It should darken just by looking outside if it's working. I think it should still darken looking at the sun either way. Try it without looking directly at the sun first.
 
/ welding helmet #6  
Really you want to trust your eyes to something you know nothing about? What if you don't cut it on quick enough when looking at the sun?

As one who has lost part of my eye sight, do not take a chance with your sight for a few dollars. I will watch the eclipse on TV.

Walt Conner
 
/ welding helmet
  • Thread Starter
#7  
thanks for the replies im not going to trust it I have an old welding helmet that's always dark I will use it .
 
/ welding helmet #8  
As one who has lost part of my eye sight, do not take a chance with your sight for a few dollars. I will watch the eclipse on TV.

Walt Conner

Or simply build a viewing box, which projects an image of the sun through a pinhole. It will take you only a few minutes, and it's 100% safe.
 
/ welding helmet #9  
thanks for the replies im not going to trust it I have an old welding helmet that's always dark I will use it .

I doubt that hood will have a dark enough lens. Most welding is done with a #9 or 10 lens. My auto darkening hood ($300) adjusts up to 13 and I adjusted the sensitivity so it it darkens in just room light. That is the first time it has been above 11.
 
/ welding helmet #10  
There was an ugly post about this a few days back. Lots of info there. read carefully. good luck !!
 

Marketplace Items

2013 CATERPILLAR 299D SKID STEER (A60429)
2013 CATERPILLAR...
2011 CIRCLE M  35 GOOSENECK (A60736)
2011 CIRCLE M 35...
Coats 5040A Tire Changer Machine (A59230)
Coats 5040A Tire...
2017 FORD F-150 XL CREW CAB TRUCK (A59823)
2017 FORD F-150 XL...
TANK MANIFOLD (A58214)
TANK MANIFOLD (A58214)
Pallet of Miscellaneous Duplex Polyester Webbing Slings (A59230)
Pallet of...
 
Top