OP
KentT
Elite Member
- Joined
- Mar 31, 2005
- Messages
- 2,928
- Location
- Sevierville, TN
- Tractor
- 1993 Power Trac 1430 w/Kubota diesel engine
I really like the way this mod works, especially with the mini-hoe. I found it very helpful to be able to lift/tilt at the same time that I was adjusting the bucket curl.
IMO, it allows more precise movements and placement of the bucket and bucket teeth since you aren't constantly switching from one control to another. As long as you position the QA plate so you can see the bucket underneath it, it's pretty easy to precisely control where it's going with the left hand operating the steering wheel (left-right) and Aux PTO (bucket curl) and the right hand controlling lift and tilt...
This is one attachment that's obviously going to take quite a use to master it, though...
IMO, it allows more precise movements and placement of the bucket and bucket teeth since you aren't constantly switching from one control to another. As long as you position the QA plate so you can see the bucket underneath it, it's pretty easy to precisely control where it's going with the left hand operating the steering wheel (left-right) and Aux PTO (bucket curl) and the right hand controlling lift and tilt...
This is one attachment that's obviously going to take quite a use to master it, though...
