Rch
Platinum Member
- Joined
- Apr 6, 2000
- Messages
- 648
- Location
- Central Wisconsin
- Tractor
- 1986 Ford 1910 with 770B (FORD) loader, 4 MFWD; 1986 Bolens G214,back hoe,loader,MFWD (Iseki) 21 hp)
Thread won\'t open up
General Forums | Attachments Previous Index Next Flat Threaded
Pages: 1
Pages: 1
Previous Index Next Flat Threaded
I hope this "screen shot" will fully copy. Every 5 to 10th time I'll open a thread and I get two gray bars that say "page 1" with no content. This latest example is from Bigguys post in Attachments about his implement being too wide. If I click on the second post or subsequent posts the thread will open. Also, sometimes I'll open a subject like Attachments or Projects and there is no indication that previous threads have been read- they are all presented as unread. Going back and re-opening the thread doesn't correct this nor the other problem. This has been going on for a couple of years or so. /forums/images/graemlins/confused.gif
General Forums | Attachments Previous Index Next Flat Threaded
Pages: 1
Pages: 1
Previous Index Next Flat Threaded
I hope this "screen shot" will fully copy. Every 5 to 10th time I'll open a thread and I get two gray bars that say "page 1" with no content. This latest example is from Bigguys post in Attachments about his implement being too wide. If I click on the second post or subsequent posts the thread will open. Also, sometimes I'll open a subject like Attachments or Projects and there is no indication that previous threads have been read- they are all presented as unread. Going back and re-opening the thread doesn't correct this nor the other problem. This has been going on for a couple of years or so. /forums/images/graemlins/confused.gif
