Studio/garage

   / Studio/garage #1  

theboman

Veteran Member
Joined
Jun 26, 2001
Messages
1,588
Location
Grayson, KY
Tractor
Kubota B7500 HST
I'm looking at getting a prebuilt 10X20 metal building to relocate my studio and giving Momma the 8X12 I currently use.

I'll insulate the walls and ceiling and need some type of cheap wallboard, etc to cover the insulation. Any suggestions?
I'm thinking signboard but haven't checked on the price yet but I'm guessing it's about $6 a sheet.
 
   / Studio/garage
  • Thread Starter
#2  
I'm looking at getting a prebuilt 10X20 metal building to relocate my studio and giving Momma the 8X12 I currently use.

I'll insulate the walls and ceiling and need some type of cheap wallboard, etc to cover the insulation. Any suggestions?
I'm thinking signboard but haven't checked on the price yet but I'm guessing it's about $6 a sheet.
 
   / Studio/garage #3  
At $6 a sheet, your not saving much money over sheetrock.

What type of studio is it? If light is an issue, I'd want something that paints well. If other art forms, you might want something on the walls that cleans quickly and easily.

If wordworking, than I prefer OSB.

For a small area like yours, the cost difference isn't gonna be very significant, even if your paying twice as much.

Eddie
 
   / Studio/garage #4  
At $6 a sheet, your not saving much money over sheetrock.

What type of studio is it? If light is an issue, I'd want something that paints well. If other art forms, you might want something on the walls that cleans quickly and easily.

If wordworking, than I prefer OSB.

For a small area like yours, the cost difference isn't gonna be very significant, even if your paying twice as much.

Eddie
 
   / Studio/garage
  • Thread Starter
#5  
With sheetrock you still have to finish it up and time is not something I have a lot of on this project. However, if it can save $200 I'll consider it, $400 I'll do it.

OSB, it's a little rougher than I'd want. I don't need finished walls, I just need flat and slinterless... I can see a spilter and get one in my finger.

We have a closeout place in town and I'm checking there for paneling etc they have on hand too.
 
   / Studio/garage
  • Thread Starter
#6  
With sheetrock you still have to finish it up and time is not something I have a lot of on this project. However, if it can save $200 I'll consider it, $400 I'll do it.

OSB, it's a little rougher than I'd want. I don't need finished walls, I just need flat and slinterless... I can see a spilter and get one in my finger.

We have a closeout place in town and I'm checking there for paneling etc they have on hand too.
 
   / Studio/garage
  • Thread Starter
#7  
Found what I was looking for, exactly! A surplus building products place has some whiteish panelling with some water damage, mostly stains or broke corner at $5 a sheet. They have enough to do what needs to be done.
 
   / Studio/garage
  • Thread Starter
#8  
Found what I was looking for, exactly! A surplus building products place has some whiteish panelling with some water damage, mostly stains or broke corner at $5 a sheet. They have enough to do what needs to be done.
 
   / Studio/garage #9  
Bo,
I was thinking a 10' x 20' is a pretty good trade for a 8' x 12'....regardless what you use for insulation and wallboard. /forums/images/graemlins/grin.gif
 
   / Studio/garage #10  
Bo,
I was thinking a 10' x 20' is a pretty good trade for a 8' x 12'....regardless what you use for insulation and wallboard. /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

2019 Allmand Light tower (A49461)
2019 Allmand Light...
2017 POLARIS RANGER 570 4X4 PROSTAR UTV (A51406)
2017 POLARIS...
2008 Ford F-250 Ext. Cab Pickup Truck (A49461)
2008 Ford F-250...
John Deere Gator XUV835M 4x4 Utility Cart (A48082)
John Deere Gator...
2013 VERMEER RTX1250 RIDE ON TRACTOR (A51242)
2013 VERMEER...
WITTIG VACUUM PUMP (A50854)
WITTIG VACUUM PUMP...
 
Top