Stuck lever

camillieri · Aug 4, 2025

I bought a Kubota B6100 and have a few questions. The high low shift lever won’t move. I don’t want to break anything so any ideas on this? It also is very noisy in one gear. The others are quiet.
Thanks

dodge man · Aug 4, 2025

Sometimes moving the tractor a little bit helps.

camillieri · Aug 4, 2025

Already tried that. Letting it soak with WD40 to see if that works.

old and tired · Aug 4, 2025

Do you have a loader to lift the front axle off the ground? Or a jack, if you don't!

What tires are on the tractor vs. what should be on there???

TractorData.com Kubota B6100 tractor dimensions information

www.tractordata.com

camillieri · Aug 5, 2025

I replaced the wheels and tires with the same size that were on it.

old and tired · Aug 5, 2025

camillieri said:
I replaced the wheels and tires with the same size that were on it.

So the transmission is not bound up? It drives fine just in the one gear that it is stuck in...

Is the 4x4 shifter working fine? Or have you tried taking it in/out and seeing if the hi/lo does anything different?

Lifting the tires off the ground and rocking them back and forth - just to see if things are bound up (or not)...