Stripped lug nut threads

   / Stripped lug nut threads #1  

Dream Farmer

Member
Joined
Mar 19, 2012
Messages
37
Location
Western MN
Tractor
Bobcat CT230
I have some lug bolts that are stripped due to end of bolt damaged. I want to run a tap through to repair any possible damage and get new bolts. Does anyone have the correct thread size for a CT230? I know they are 12mm but not sure if 1.25 or 1.5 threads
 
Last edited:
   / Stripped lug nut threads #2  
Look and see if it will poke through unimpeded. My JD uses a certain length but they were had to get so I just got the next length up and they stuck through the hub a quarter inch. Not a problem. At least I can see if they are backing out at all.
 
   / Stripped lug nut threads #3  
Take a good nut/bolt pair to your local dealer and go from there. I've never put much faith in stripped nut/bolt combo's - especially when dealing with wheel components.
 
   / Stripped lug nut threads #4  
Fronts are 12mmx1.25, rears are 16mmx1.5
 
   / Stripped lug nut threads #5  
   / Stripped lug nut threads
  • Thread Starter
#6  

Tractor & Equipment Auctions

Adams Load Out Conveyor - Stainless Steel Assembly - Baldor Electric Motor (A51039)
Adams Load Out...
IH Cub Lo-Boy 154 (A50514)
IH Cub Lo-Boy 154...
2014 MACK CHU TANDEM AXLE DAY CAB (A51219)
2014 MACK CHU...
CATERPILLAR 308E2 CR EXCAVATOR (A50458)
CATERPILLAR 308E2...
2013 Ver-Mac Solar S/A Towable Trailer Message Board (A49461)
2013 Ver-Mac Solar...
2019 CATERPILLAR 930M WHEEL LOADER (A51242)
2019 CATERPILLAR...
 
Top