Stripped lug nut threads

   / Stripped lug nut threads #1  

Dream Farmer

Member
Joined
Mar 19, 2012
Messages
37
Location
Western MN
Tractor
Bobcat CT230
I have some lug bolts that are stripped due to end of bolt damaged. I want to run a tap through to repair any possible damage and get new bolts. Does anyone have the correct thread size for a CT230? I know they are 12mm but not sure if 1.25 or 1.5 threads
 
Last edited:
   / Stripped lug nut threads #2  
Look and see if it will poke through unimpeded. My JD uses a certain length but they were had to get so I just got the next length up and they stuck through the hub a quarter inch. Not a problem. At least I can see if they are backing out at all.
 
   / Stripped lug nut threads #3  
Take a good nut/bolt pair to your local dealer and go from there. I've never put much faith in stripped nut/bolt combo's - especially when dealing with wheel components.
 
   / Stripped lug nut threads #4  
Fronts are 12mmx1.25, rears are 16mmx1.5
 
   / Stripped lug nut threads #5  
   / Stripped lug nut threads
  • Thread Starter
#6  

Tractor & Equipment Auctions

(2) UNUSED HAY SPEARS (A52706)
(2) UNUSED HAY...
Mobile Transformer and Power Substation Portable Power Supply (A55302)
Mobile Transformer...
2015 Ford F-350 Utility Flatbed Truck (A51692)
2015 Ford F-350...
2012 HEIL CRUDE TRAILER (A55745)
2012 HEIL CRUDE...
2016 HINO 268 26FT BOX TRUCK (A52141)
2016 HINO 268 26FT...
2019 Caterpillar DP35N 7,000lb Diesel Forklift (A54811)
2019 Caterpillar...
 
Top