Stripped lug nut threads

   / Stripped lug nut threads #1  

Dream Farmer

Member
Joined
Mar 19, 2012
Messages
37
Location
Western MN
Tractor
Bobcat CT230
I have some lug bolts that are stripped due to end of bolt damaged. I want to run a tap through to repair any possible damage and get new bolts. Does anyone have the correct thread size for a CT230? I know they are 12mm but not sure if 1.25 or 1.5 threads
 
Last edited:
   / Stripped lug nut threads #2  
Look and see if it will poke through unimpeded. My JD uses a certain length but they were had to get so I just got the next length up and they stuck through the hub a quarter inch. Not a problem. At least I can see if they are backing out at all.
 
   / Stripped lug nut threads #3  
Take a good nut/bolt pair to your local dealer and go from there. I've never put much faith in stripped nut/bolt combo's - especially when dealing with wheel components.
 
   / Stripped lug nut threads #4  
Fronts are 12mmx1.25, rears are 16mmx1.5
 
   / Stripped lug nut threads #5  
   / Stripped lug nut threads
  • Thread Starter
#6  

Tractor & Equipment Auctions

1979 MACK R MODEL WINCH TRUCK (A53843)
1979 MACK R MODEL...
2017 CATERPILLAR 415F2 BACKHOE (A52706)
2017 CATERPILLAR...
2018  FREIGHTLINER M2 26FT NON CDL BOX TRUCK (A52576)
2018 FREIGHTLINER...
2012 TEXAS BRAGG ENTERPRISES 24+6 T/A GOOSENECK TRAILER (A55745)
2012 TEXAS BRAGG...
MINI DUMPER SDLD25 (A55745)
MINI DUMPER SDLD25...
SKIDDED FRAC TANK (A55745)
SKIDDED FRAC TANK...
 
Top