Stripped lug nut threads

   / Stripped lug nut threads #1  

Dream Farmer

Member
Joined
Mar 19, 2012
Messages
37
Location
Western MN
Tractor
Bobcat CT230
I have some lug bolts that are stripped due to end of bolt damaged. I want to run a tap through to repair any possible damage and get new bolts. Does anyone have the correct thread size for a CT230? I know they are 12mm but not sure if 1.25 or 1.5 threads
 
Last edited:
   / Stripped lug nut threads #2  
Look and see if it will poke through unimpeded. My JD uses a certain length but they were had to get so I just got the next length up and they stuck through the hub a quarter inch. Not a problem. At least I can see if they are backing out at all.
 
   / Stripped lug nut threads #3  
Take a good nut/bolt pair to your local dealer and go from there. I've never put much faith in stripped nut/bolt combo's - especially when dealing with wheel components.
 
   / Stripped lug nut threads #4  
Fronts are 12mmx1.25, rears are 16mmx1.5
 
   / Stripped lug nut threads #5  
   / Stripped lug nut threads
  • Thread Starter
#6  

Tractor & Equipment Auctions

Year: 2007 Make: Ford Model: Explorer Vehicle Type: Multipurpose Vehicle (MPV) Mileage: Plate: Body (A55788)
Year: 2007 Make...
2006 INTERNATIONAL 9900I DAYCAB (A55745)
2006 INTERNATIONAL...
New/Unused CFG Industrial Mini Skidsteer Digger (A54865)
New/Unused CFG...
JOHN DEERE CP 770 (A53084)
JOHN DEERE CP 770...
2016 Ford E-450 LP Handicapped Bus (A53422)
2016 Ford E-450 LP...
KENWORTH ROLLBACK TOW TRUCK (A52706)
KENWORTH ROLLBACK...
 
Top