SSQA - is there a standard/conventional width?

[FlyFishn]

Is there a standard/conventional inside width of a SSQA implement receiver? Specifically the inside width of the angled top lip that hangs on the loader arms.

If so - what is that number?

if "sorta kinda, but not really" - what is the "range"?

 

[Hay Dude]

Pretty sure it’s 45”

 

[Shawn T. W.]

How about this?

https://www.tractorbynet.com/forums/threads/skid-steer-quick-attach-plate-specs.112570/

 

[TMGT]

This should give you all the dimensions, although some manufactures have some variations.

Sent from my SM-S921U using TractorByNet mobile app

 

[FlyFishn]

It appears the answer is the "sorta kinda, but not really" version. Thats what I figured.

The SAE J2513 standard and what appears, perhaps, to be european or asian is 1131mm. This translates to 44.5".

The dimensions @TMGT references show 45".

So it appears I got an implement built to SAE J2513 and I have a machine that is built to the other. Thats wonderful. I wont modify a new machine, but it appears some cutting and welding is on the agenda for the implement.

 

[TMGT]

It appears the answer is the "sorta kinda, but not really" version. Thats what I figured.

The SAE J2513 standard and what appears, perhaps, to be european or asian is 1131mm. This translates to 44.5".

The dimensions @TMGT references show 45".

So it appears I got an implement built to SAE J2513 and I have a machine that is built to the other. Thats wonderful. I wont modify a new machine, but it appears some cutting and welding is on the agenda for the implement.

What's the current width of your QA on the machine?

Sent from my SM-S921U using TractorByNet mobile app

 

[Hay Dude]

Guys, guys…..

Relax…..It’s 45”, ok????

As TMGT showed on his diagram.

Don’t make me call Dr Rick……

 

[FlyFishn]

Guys, guys…..

Relax…..It’s 45”, ok????

As TMGT showed on his diagram.

View attachment 4948576

Don’t make me call Dr Rick……


View attachment 4948577

Unfortunately, that is not what an implement/adpter is that I got. It is the 1131mm version and my loader arms dont clear it. I can post a more exact "as meaaured" figure later. But the issue is there is about 1/4" of no-go. I use a large clamp to pull the loader arms to squeeze it to fit - I dont want to keep doing that.