kokopelli2
Gold Member
hey guys i was just wondering if there was a better way to keep snow from caking up on my blade and in my bucket than waxing? we are finally expecting some snow here in md.
thanx
thanx
Snow Attachments snow removal
- Thread starter kokopelli2
- Start date
- Views: 2051
rja
Bronze Member
Try spraying it with a mixture of diesel fuel and oil. I tried this under my mower this past summer and had good results. I haven't tried this for snow, but I will......
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,834
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
I heard kerosene works well...but..
Do you scape and prime or paint your bucket and plow before each snow plowing season,for that helps.
Thomas..NH /w3tcompact/icons/wink.gif
Do you scape and prime or paint your bucket and plow before each snow plowing season,for that helps.
Thomas..NH /w3tcompact/icons/wink.gif
Rowski
Veteran Member
- Joined
- May 18, 2000
- Messages
- 1,474
- Location
- North Central Vermont, Jay Peak Area
- Tractor
- 2004 New Holland TN70DA with 32LC loader, 2000 New Holland 2120 with Curtis cab, 7309 loader
Try letting the blade and/or bucket get to the same temp as the ambient temp. I do this with my snowplows (for the trucks) and work well. Also keeping the surface very smooth by having fresh paint at the begining of the season.
Derek
Derek
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
I live in NW Montana. Lots of snow and very cold temps. I had considered using a spray-on wax, but thought I would try spraying WD40 on my rear blade, rear snowthrower, and FEL this winter. After about a month, and several uses, it is still working. Makes all the difference.
