Rounded off drain plug

   / Rounded off drain plug
  • Thread Starter
#1,091  
Lets not get ahead of ourselves now, we have to discuss the plan some more. There may be a better tool for the job. :D

Hammer an undersized socket on, weld it. Attach and weld breaker bar to socket. Weld pipe wrench to breaker bar. Then, finally, turn the tractor to loosen?
 
   / Rounded off drain plug #1,092  
Now this thread is really going downhill. Next Geoduck will be asking if the refrigerator light really does shut off!

Of course the light shuts off... there's a little man in there that does it.

My Dad told me so. :eek:ath:
 
   / Rounded off drain plug #1,093  
Hammer an undersized socket on, weld it. Attach and weld breaker bar to socket. Weld pipe wrench to breaker bar. Then, finally, turn the tractor to loosen?

Close enough to a Rube Goldberg solution that I'll allow it... as long as at least one of the components is made by ACME.
 
   / Rounded off drain plug #1,094  
   / Rounded off drain plug #1,095  
Run cord from across the room for new light inside. If door doesn't shut, drill hole. Use outside flood light with motion detector on it. We don't want it to stay on all the time and heat the beer.
 
   / Rounded off drain plug #1,096  
My wife wants to know why I have to check the internet 3 times a day. I HAVE TO SEE ABOUT THE DRAIN PLUG!
 
   / Rounded off drain plug #1,097  
This is the easiest way...
1) remove exhaust pipe & steering wheel
2) Chock back wheels, put in neutral
3) drain gas & coolant
4) remove trans fill plug
5) have a keg party inviting 40 strong guys
6) after an hour or so...say "I bet we could flip that tractor upside down, up and backwards".
7) after draining, flip it back up.
 
   / Rounded off drain plug #1,098  
My wife wants to know why I have to check the internet 3 times a day. I HAVE TO SEE ABOUT THE DRAIN PLUG!

Kando actually got it removed by the time we hit page three; but found the thread so entertaining that he didn't want to tell us.
 
   / Rounded off drain plug #1,099  
Hammer an undersized socket on, weld it. Attach and weld breaker bar to socket. Weld pipe wrench to breaker bar. Then, finally, turn the tractor to loosen?

You forgot to work a vice in there :laughing:
 

Tractor & Equipment Auctions

3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
2021 Ford F-250 4x4 Ext. Cab Pickup Truck (A49461)
2021 Ford F-250...
2004 Dodge Dakota Ext. Cab Pickup Truck (A50323)
2004 Dodge Dakota...
Ford Super Duty 4x4 Pickup Truck Bed (A49461)
Ford Super Duty...
2003 MACK RD688S T/A DUMP TRUCK (A51406)
2003 MACK RD688S...
Deere 9970 Cotton Picker (A51039)
Deere 9970 Cotton...
 
Top