Rounded off drain plug

[Semper Paratus]

Retrieve suction tube? That's easy...

Step 1) Remove drain plug.

Bad Bad Bad:laughing:

 

[Diggin It]

Have we tried a Romulan Nut Disruptor yet?

Or an Illudium Q36 Explosive Nut Modulator?

 

[YLee Kioti]

Yah know fellas yah gots the right tools listed but you failed to include the right technician for Kandu!


OK which way to the drain plug???



OK, now what...I've used all the TBN recommended tools?!?!

 

[airbiscuit]

What a relief...I thought this thread had died!

I'm hoping this surpasses the Pallets in Fields thread :laughing:

 

[goeduck]

This is as perplexing as removing a drain plug on a pallet.

 

[Diggin It]

How do you drain a pallet?

Put it in a shed with a wooden floor and let 'them' remove the plug.

 

[TheMan419]

Don't you guys have anything better to do....

Oh wait.....

 

[Kando]

Don't you guys have anything better to do....

Oh wait.....

It all entertains me. Keep going by all means.

 

[ddbackhoe]

have you tried clamping a vise tightly to it?.(put it on a floor jack) once clamped on, you should be able to turn the vise to loosen the nut, it has a much higher clamping force than what you have previously tried. if you know someone in your fire department, they may be able to get that loose with the "jaws of life", if it has clamping capability..

:applause: Since the rescue service will be there anyway from trying the first suggestion....:laughing:

 

[airbiscuit]

have you tried clamping a vise tightly to it?.(put it on a floor jack) once clamped on, you should be able to turn the vise to loosen the nut, it has a much higher clamping force than what you have previously tried. if you know someone in your fire department, they may be able to get that loose with the "jaws of life", if it has clamping capability.. I need to say, that keeping bad oil, possibly with metal flakes in it, is not good at all for the transmission, that small amount on the bottom of the pan that you can't pump out will get stirred up!..

:applause: Since the rescue service will be there anyway from trying the first suggestion....:laughing:

Radios1 has it wrong. Once you have the floor jack set, and the vice tightened on the drain plug, then you rotate the tractor.