Replace Reflective Tape with Lights

   / Replace Reflective Tape with Lights #11  
But you still have the reflective metal triangle right? Maybe that is only a state specific law?
 
   / Replace Reflective Tape with Lights #12  
But you still have the reflective metal triangle right? Maybe that is only a state specific law?
 
   / Replace Reflective Tape with Lights #13  
Sure you can - then the tree limbs will remove your lights /forums/images/graemlins/grin.gif
 
   / Replace Reflective Tape with Lights #14  
Sure you can - then the tree limbs will remove your lights /forums/images/graemlins/grin.gif
 
   / Replace Reflective Tape with Lights
  • Thread Starter
#15  
Yes I still have the reflective triangle on the rear. Just want to remove the reflective tape and replace with lights for more exposure.

Thanks
Randy
 
   / Replace Reflective Tape with Lights
  • Thread Starter
#16  
Yes I still have the reflective triangle on the rear. Just want to remove the reflective tape and replace with lights for more exposure.

Thanks
Randy
 
   / Replace Reflective Tape with Lights #17  
Randy I believe that I understand what you want to accomplish and think your lamps not only a good idea safety wise but also much better protected than the OEM lamps.

Take pictures of your project, please.
 
   / Replace Reflective Tape with Lights #18  
Randy I believe that I understand what you want to accomplish and think your lamps not only a good idea safety wise but also much better protected than the OEM lamps.

Take pictures of your project, please.
 
   / Replace Reflective Tape with Lights #19  
I think the lights would be a nice addition - it appears the fenders were actually molded with lighting in mind - some engineer must have introduced a cost savings in the production process to replace with reflective tape.

Hopefully you can route the wiring in a protected area.

I agree with Pineridge that the fender lights would be better protected than the ROPS lights - I had a tree limb rip the entire housing off on side of my TN - but nothing a little duct tape couldn't take care of.

BTW - Nice looking tractor you have - I like your FEL handle
 
   / Replace Reflective Tape with Lights #20  
I think the lights would be a nice addition - it appears the fenders were actually molded with lighting in mind - some engineer must have introduced a cost savings in the production process to replace with reflective tape.

Hopefully you can route the wiring in a protected area.

I agree with Pineridge that the fender lights would be better protected than the ROPS lights - I had a tree limb rip the entire housing off on side of my TN - but nothing a little duct tape couldn't take care of.

BTW - Nice looking tractor you have - I like your FEL handle
 

Tractor & Equipment Auctions

AUCTION STARTS HERE @ 9AM (A51406)
AUCTION STARTS...
1982 MACK RD685S HOTOILER (A50854)
1982 MACK RD685S...
2010 Keystone Cougar 5th Wheel T/A Travel Trailer (A48082)
2010 Keystone...
2012 MACK GU713 DUMP TRUCK (A51406)
2012 MACK GU713...
2019 Komatsu PC490LC Hydraulic Excavator (A49461)
2019 Komatsu...
2015 Chevrolet Silverado (A50323)
2015 Chevrolet...
 
Top