PHD on 790

edgaines · Mar 22, 2004

I got a PHD for the 790, then found that the 3PH wouldn't go high enough to get it off the ground. I ordered another adjustable link to replace the fixed "down link" on the left side of the 3PH, to get it higher. I realize I will have to drill the hole, then, with the auger down, adjust out the links to get to the right depth. Anyone else have this situation?? /forums/images/graemlins/tongue.gif

JerryG · Mar 22, 2004

Does the yoke not have any adjustment holes in it?

edgaines · Mar 22, 2004

It only has 1 "extra" hole in it, and it raises only about 1".

The price of the adjustable is $179, but I gues I gonna have to bite the bullet anyhow.

JerryG · Mar 22, 2004

Can you add plates like in this picture?

Bellville · Mar 26, 2004

Ed,

Do you have an extra long auger bit? I have a PHD and it is probably 6 to 8 inches off the ground when raised all the way up?

edgaines · Mar 27, 2004

I got it fixed, and working by drilling holes in the down link forks from the lift arms 1.5 inches up from original. Works great now.
Thanks for all the suggestions.