Mitsubishi D1350FD

[MickD1350]

I am new to this, so any and all reply's are welcomed. I have a D1350FD with K3A engine. Need repair manual so I can fix the hydrolic lift which is stuck in top position. Mike at <a href="]magr1129@bellsouth.net[/url]

 

[MickD1350]

I am new to this, so any and all reply's are welcomed. I have a D1350FD with K3A engine. Need repair manual so I can fix the hydrolic lift which is stuck in top position. Mike at <a href="]magr1129@bellsouth.net[/url]

 

[oliver28472]

Mike, you might look down below in the Mitsubishi forum. There are several dealers there that can supply manuals and phone assistance. I have dealt with Bill Rodgers at Valley Power and Len Shaeffer at Shaeffer's Town and Country. Both are good. There are probably several other good ones too. You can scroll down until you find where they have replied to somebody. Click on their name, which will give the profile and usually the phone number. Sometimes that will be in the post as well.

 

[buppy69]

Try loosening the valve under the front of the seat.

Eugene

 

[lens12]

If it was working fine & quit it could be a broken piston rod to rockshaft pin. I can supply you with manuals.

 

[MickD1350]

Len, Thanks for your response. I would like repair/ parts manuals before I begin taking the tractor apart. How do I go about getting them?