MF35 stuck in reverse
- Thread starter FrankT
- Start date
- Views: 2208
-
- Tags
- massey ferguson 35
JerryG
Super Member
FrankT,
Go to this page and it will tell you how to fix it.
http://hometown.aol.com/bigdean62/page2.html
Go to this page and it will tell you how to fix it.
http://hometown.aol.com/bigdean62/page2.html
rlk
Gold Member
Frank, the link JerryG gave is a good one, and tells exacatly how to correct the problem. Mine got stuck several years ago, and I freed it up. I was also nervous about putting too much pressure on the gears and breaking something else.
It takes a good size screw driver, or pry bar. It also took some trial and error - it's hard to see in that little access hole. Finally out of desperation, I gave it a good shove, and the gear moved where it was supposed to be. Have never had the problem since.
Good luck, and let us know if you get it fixed.
It takes a good size screw driver, or pry bar. It also took some trial and error - it's hard to see in that little access hole. Finally out of desperation, I gave it a good shove, and the gear moved where it was supposed to be. Have never had the problem since.
Good luck, and let us know if you get it fixed.
rdbrumfield
Veteran Member
I used to have that problem, but it stuck in first. I would open the fill hole and with a heavy screw driver slip the fork back. I can't remember the shift pattern, but if you move the stick forward to go to reverse, you will move the fork forward to take it out.
