Max26XL Hydraulics

   / Max26XL Hydraulics #43  
38megs. Maybe I could upload it to DropBox and establish a link.
You should also be able to do an "Export" of the image as a Jpeg and adjust the image size down to 2-3MB, which is plenty clear on a monitor.
 
   / Max26XL Hydraulics
  • Thread Starter
#44  
Thank you everyone for your research and input. I removed the cap today and found a plug in the port. I removed it, replaced the cap and the 3 point went up. My elation was short-lived since now the 3 point will not go down. Any thoughts?
 
Last edited:
   / Max26XL Hydraulics
  • Thread Starter
#45  
You should also be able to do an "Export" of the image as a Jpeg and adjust the image size down to 2-3MB, which is plenty clear on a monitor.
I'll do that. See my comment above.
 
Last edited:
   / Max26XL Hydraulics #46  
Thank you everyone for you research and input. I removed the cap today and found a plug in the port. I removed it, replaced the cap and the 3 point went up. My elation was short-lived since now the 3 point will not go down. Any thoughts?
you moved the lever down and put weight on the 3pt right? its gravity down
 
   / Max26XL Hydraulics
  • Thread Starter
#47  
you moved the lever down and put weight on the 3pt right? its gravity down
I actually stood on it with the lever down and it wouldn't budge. It seems locked in the up position.
 
   / Max26XL Hydraulics
  • Thread Starter
#48  
I was able to fertilize two pastures today with the 3 point in the up position. I will be spraying for weeds tomorrow, but won't be able to use the rake in the lower position. Should I reinsert the plug I removed to see if the 3 point will lower?
 
   / Max26XL Hydraulics #49  
The dial that controls your 3 point lowering speed, what position is it in. If it's all the way closed 3pt won't go down.
 
   / Max26XL Hydraulics
  • Thread Starter
#50  
The dial that controls your 3 point lowering speed, what position is it in. If it's all the way closed 3pt won't go down.
I normally keep it in the middle but with the current situation I have it all the way open.
 

Tractor & Equipment Auctions

2013 PETERBILT 367 DAY CAB (INOPERABLE) (A50854)
2013 PETERBILT 367...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
2016 SDLG L948F WHEEL LOADER (A51242)
2016 SDLG L948F...
2013 Nissan Pathfinder (A50324)
2013 Nissan...
INGERSOLL RAND G25 GENERATOR (A50854)
INGERSOLL RAND G25...
 
Top