Big Hammer
Bronze Member
- Joined
- Jul 1, 2009
- Messages
- 66
hello
My Yanmar excavator needs a new part! (solonoid) Hoping someone here might be able to help.
The machine is a ViO50, ser # 10825B, 1998 year
The starter solonoid is remotely mounted up near the battery tray. The solonoid is 'married' to some sort of relay; the relay(?) is actually the suspect component. I beleive that if one were to order the solonoid, it would come with the relay.
The relay is approx 2"X3"X1/2" thick. There are 3 wires comeing from the solonoid into the relay. The relay has a 6" long set of wires that plugs into the harness.
On the relay is part # AST1-11 Hitachi
Any suggestions as far as source to purchase?
Many thanks
Mark
My Yanmar excavator needs a new part! (solonoid) Hoping someone here might be able to help.
The machine is a ViO50, ser # 10825B, 1998 year
The starter solonoid is remotely mounted up near the battery tray. The solonoid is 'married' to some sort of relay; the relay(?) is actually the suspect component. I beleive that if one were to order the solonoid, it would come with the relay.
The relay is approx 2"X3"X1/2" thick. There are 3 wires comeing from the solonoid into the relay. The relay has a 6" long set of wires that plugs into the harness.
On the relay is part # AST1-11 Hitachi
Any suggestions as far as source to purchase?
Many thanks
Mark
Attachments
Last edited: