Box Scraper Land Leveler Build

   / Land Leveler Build #21  
I have a Land Pride GS2584. At 800# it is a lightweight compared to what the OP is building. The replaceable cutting blades( 2 ) are mounted on angle iron. So the cutting blades are at a 45 degree angle - relative to the ground. Their angle across the unit would be 15 to 20 degrees - a guess. Angled across the unit because it's probably a more efficient way to cut into the dirt.

Mine has scarifiers. ABSOLUTELY NECESSARY to get anything accomplished on my rock hard gravel driveway. Otherwise - without first using the scarifiers - the unit just bounces along behind the tractor. For three years I tried to get the LPGS to work - no joy. Then in desperation I used the scarifiers. It is now a very useful implement.

I drop the scarifiers about an inch and a half below the following blades/side skids. It scarifies and the blades level it out very nicely. In my situation there would be no need for a rear gate.

As an experiment - I've put 400#( a big pine log ) on top of the LPGS. It DID make the unit cut into the driveway - somewhat. Not near as good as using the scarifiers.

JMHO - if you are dealing with soft soil or a "soft" driveway - scarifiers may not be required. Otherwise - it will be a required addition.

BTW - what is your estimate of the final weight??
 
 

Tractor & Equipment Auctions

2016 Toro Groundsmaster 3505D 72in Rotary Mower (A51691)
2016 Toro...
John Deere 970 Cultimulcher (A52128)
John Deere 970...
2012 INTERNATIONAL DURASTAR 4400 4X2 SERVICE TRUCK (A51406)
2012 INTERNATIONAL...
SpotWeld RockerRite 480V Arm Type Spot Welder (A50322)
SpotWeld...
Tandem Axle Silage Cart (A50774)
Tandem Axle Silage...
Wolverine Mini Skid Steer Combination Bucket (A50514)
Wolverine Mini...
 
Top