Box Scraper Land Leveler Build

/ Land Leveler Build #21  
I have a Land Pride GS2584. At 800# it is a lightweight compared to what the OP is building. The replaceable cutting blades( 2 ) are mounted on angle iron. So the cutting blades are at a 45 degree angle - relative to the ground. Their angle across the unit would be 15 to 20 degrees - a guess. Angled across the unit because it's probably a more efficient way to cut into the dirt.

Mine has scarifiers. ABSOLUTELY NECESSARY to get anything accomplished on my rock hard gravel driveway. Otherwise - without first using the scarifiers - the unit just bounces along behind the tractor. For three years I tried to get the LPGS to work - no joy. Then in desperation I used the scarifiers. It is now a very useful implement.

I drop the scarifiers about an inch and a half below the following blades/side skids. It scarifies and the blades level it out very nicely. In my situation there would be no need for a rear gate.

As an experiment - I've put 400#( a big pine log ) on top of the LPGS. It DID make the unit cut into the driveway - somewhat. Not near as good as using the scarifiers.

JMHO - if you are dealing with soft soil or a "soft" driveway - scarifiers may not be required. Otherwise - it will be a required addition.

BTW - what is your estimate of the final weight??
 
 

Marketplace Items

2017 ISUZU NPR 18 FT  BOX TRUCK (A59905)
2017 ISUZU NPR 18...
Bobcat MT85 (A60462)
Bobcat MT85 (A60462)
Atlas Copco Air Compressor & Air Dryer (A62613)
Atlas Copco Air...
2014 Bobcat T650 (A60462)
2014 Bobcat T650...
2023 NISSAN ALTIMA SEDAN (A59912)
2023 NISSAN ALTIMA...
2019 Ford F450 4x4 Service Truck w/ Tommy Gate (A62613)
2019 Ford F450 4x4...
 
Top