kubota LA352 loader stuck in float position

[mya]

kubota la352 loader stuck in float position still after having detent replaced with new , any thoughts or help appreciated

 

[Peter 315]

Did you replace the parts or the dealer maybe its not back together correct.

 

[mya]

A very reputable hydraulic repair shop rebuilt detent

 

[mya]

i have seen posts with this same problem but no solutions

 

[Peter 315]

It might just be hard to pull it out of detent.

 

[mya]

its normally harder to pull out but now it will only come out if i hit the bottom of the control lever with a hammer, and dont want to make worse

 

[Peter 315]

Id try a light spray oil to the parts. I see that its a common problem with that loader valve.

 

[mya]

Id try a light spray oil to the parts. I see that its a common problem with that loader valve.

where would you spray oil specifically? everything is well lubricated externally, are you thinking inside the valve ? thanx

 

[Peter 315]

The cup on the bottom some people drill a little hole to let the water out I'd take that off and spray up in inside that the balls and spring.

 

[Peter 315]

messicks shows a break down of that valve.