John Deere 5103

   / John Deere 5103 #1  

redfin00

Member
Joined
Feb 11, 2014
Messages
41
Location
Navasota Tx.
Tractor
5103 John Deere
just joined today lots of good info.I am having trouble restarting after tractor died positive nut on clamp deteriated making loose connection.Battery was tested bad so got new battery changed fuel filter and cannot get to start.I would like to understand the bleeding procedure as have been told different ways to perform.I am just frustrated and cold will wait for warmer tomorrow?Checked fuse and is good on fuel shut off solenoid.
 
   / John Deere 5103 #2  
   / John Deere 5103 #3  
welcome sir! I have a PDF of the Deere Tech manual if you want it. Shoot me your email if so

Joe
 
   / John Deere 5103
  • Thread Starter
#4  
Here is a link to the operators manual would start there as how to bleed. Here is a YouTube video that may help. Also it helps to fill the new filter before putting it on. Can not hurt to double check the fuses, starting with the 30amp key fuse.

Are you getting any smoke coming out?

Hope this helps.

http://manuals.deere.com/omview/OMRE268160_19/?tM=FR

JD 5203 John Deere tractor fuel filter change - YouTube

After reading threads and looking for smoke don't see any,engine is turning over like normal?
 
   / John Deere 5103 #5  
Loosen screw(parts key #4) and pump hand pump(parts key #7) until fuel comes out under screw head then tighten screw and attempt to crank. I'll bet you won't have to bleed inj lines.
 

Attachments

  • PUP128_________UN24MAY00.gif
    PUP128_________UN24MAY00.gif
    41.8 KB · Views: 2,235
   / John Deere 5103 #6  
Following the manual and what was suggested in the video do you feel you have the system bleed? Having you stand by the injection pump and having someone turn the key just to the run position (no need to try and try to start it) can you hear the fuel solenoid click?
 
   / John Deere 5103
  • Thread Starter
#7  
Thanks will check out though looks different than mine?
 
   / John Deere 5103
  • Thread Starter
#8  
Have not but makes sense will try thanks,fuse checked good though
 
   / John Deere 5103
  • Thread Starter
#9  
yes like always checked fuel solenoid fuse it is ok am going out to turn key listen for click and check diagram received to see if same.Lots of good help here thanks to all!
 

Tractor & Equipment Auctions

2006 Husqvarna YTH2148B 48in Riding Mower (A51694)
2006 Husqvarna...
2013 Husqvarna YTH18542 42in Riding Mower (A51694)
2013 Husqvarna...
JOHN DEERE 560M LOT NUMBER 15 (A53084)
JOHN DEERE 560M...
6"x8' Treated Post,  Approx. 28 Piece Bundle  (A52384)
6"x8' Treated...
JOHN DEERE 7300 LOT NUMBER 18 (A53084)
JOHN DEERE 7300...
2012 CATERPILLAR 304E CR EXCAVATOR (A51242)
2012 CATERPILLAR...
 
Top