JD 750 Stops Moving

/ JD 750 Stops Moving #1  

jgbanshee

Gold Member
Joined
Sep 16, 2004
Messages
316
Location
PA
Tractor
JD 310SE, 325G, 35G, 4300, 5300, 5210, 445, 450 Crawler, CAT D3B, Ford 2N, 7000, 5000, 4000su, 3610, 445D, 345C, 340B, 1100
Neighbor of mine has a JD 750 and he pulls a finish mower behind it. When he turns the PTO on the tractor will not drive. If the PTO is disengaged, it drives slowly. Is this a burnt out clutch disk?
 
/ JD 750 Stops Moving #2  
To possibly be of some help, I'd need more info about some history and what things he or you have checked out. Maybe others can pinpoint it without more info.
 
/ JD 750 Stops Moving
  • Thread Starter
#3  
I took the 750 for a test drive today.

Here is what I noted:
1. Clutch pedal has a lot of freeplay
2. Low Range - all gears will drive tractor. Engage PTO with mower on and in any gear, tractor will not move. PTO shaft can be seen trying to turn.
3. High Range - all gears, tractor hesitate to move but slowly starts moving. Engage PTO and nothing.
4. Low Range and 1st gear in 2wd with turf tires - pushed into a pile of dirt with loader and it got about a half of bucket and stopped moving, no tire spinning either.

Are all of these symptoms of a worn out clutch?
 
/ JD 750 Stops Moving #4  
Sure sounds like worn out clutch to me. The pto is not dual stage, so it is adding to the load on worn out clutch.
 

Marketplace Items

Komatsu PC138USLC Excavator (A64047)
Komatsu PC138USLC...
78in Caterpillar Skidsteer Tooth Bucket (A65579)
78in Caterpillar...
2022 EZ-GO ELITE ELECTRIC GOLF CART (A63276)
2022 EZ-GO ELITE...
Skid Steer Blank U-Plate (A65640)
Skid Steer Blank...
Craftsman 16in Variable Speed Scroll Saw (A64553)
Craftsman 16in...
New/Unused Landhonor Mini Skidsteer (A65583)
New/Unused...
 
Top