JD 750 Stops Moving

   / JD 750 Stops Moving #1  

jgbanshee

Gold Member
Joined
Sep 16, 2004
Messages
316
Location
PA
Tractor
JD 310SE, 4300, 5300, 5210, 450 Crawler, CAT D3B, Ford 2N, 5000, 4000su, 3610, 345C, 340B, 1100
Neighbor of mine has a JD 750 and he pulls a finish mower behind it. When he turns the PTO on the tractor will not drive. If the PTO is disengaged, it drives slowly. Is this a burnt out clutch disk?
 
   / JD 750 Stops Moving #2  
To possibly be of some help, I'd need more info about some history and what things he or you have checked out. Maybe others can pinpoint it without more info.
 
   / JD 750 Stops Moving
  • Thread Starter
#3  
I took the 750 for a test drive today.

Here is what I noted:
1. Clutch pedal has a lot of freeplay
2. Low Range - all gears will drive tractor. Engage PTO with mower on and in any gear, tractor will not move. PTO shaft can be seen trying to turn.
3. High Range - all gears, tractor hesitate to move but slowly starts moving. Engage PTO and nothing.
4. Low Range and 1st gear in 2wd with turf tires - pushed into a pile of dirt with loader and it got about a half of bucket and stopped moving, no tire spinning either.

Are all of these symptoms of a worn out clutch?
 
   / JD 750 Stops Moving #4  
Sure sounds like worn out clutch to me. The pto is not dual stage, so it is adding to the load on worn out clutch.
 

Tractor & Equipment Auctions

2014 CATERPILLAR 279D SKID STEER (A51242)
2014 CATERPILLAR...
2025 JMR 36in Bucket Mini Skid Steer Attachment (A50322)
2025 JMR 36in...
Wolverine Mini Skid Steer Pallet Forks (A50514)
Wolverine Mini...
(INOP) BROCE RT350 SWEEPER (A51243)
(INOP) BROCE RT350...
Barn Wood Picnic Table (A50515)
Barn Wood Picnic...
2000 CATERPILLAR 140H MOTOR GRADER (A51406)
2000 CATERPILLAR...
 
Top