JD 1020 power steering

[Tx Jim]

Benedek
Happy Easter to you & all other members.

"L" is designed to be utilized for all ground engaging implements such as plows/disk harrows & allow tractor hyd mechanism to control 3 pt/implement height. "D" is designed for all other functions such as operating a mower or blade where operator desires to control height of 3 pt & attached implements. "L/D" is a less sensitive setting than "L".
Jim

PS: your last sentence is incorrect

 

[historyan1975]

Thanks, Tx JIm...

So I going to select the level D position and do my job... When, rarelly I going to plough, I repush in positon L...

Sincerelly, Benedek Joseph

 

[Tx Jim]

Benedek
You're welcome
Jim

 

[historyan1975]

Hi,
I have a new problem with a stering arm from the front axle as you can see on the attached short video.

The triangle shaped bellcrank is clicking very much on its own hole/caliber.
What could I do?
I suppose I should repair/replace the bush between the stearing arm pin and the caliber/ or I need a pair of new needle bearing acording to the photo?

Thanks, Benedek J

 

[Tx Jim]

Whether your 1020 will need bushings or needle brgs on bellcrank shaft will be determined by tractor serial #. Bushings up to SN _-062660 & needle brgs SN 062661-

 

[historyan1975]

Thanks.. On my tractor I cant see the serial number plate.. But its made in 1972, theoratically the serial number sholud be starting from the number 134700.... Am I right_?!
According to your advice I need to buy the needle bearing?

 

[Tx Jim]

How did you determine your 1020 was built in 1972 without having access to tractor serial #? Did you look on RH side of trans case for serial # tag? I agree 1020's built after mid-1968 should have needle brgs in this application.

 

[historyan1975]

How did you determine your 1020 was built in 1972 without having access to tractor serial #? Did you look on RH side of trans case for serial # tag? I agree 1020's built after mid-1968 should have needle brgs in this application.

I have the original tractors papers from Germany (register, stud book).

 

[Tx Jim]

So registry book doesn't contain tractor serial #? I'll guess your tractors serial# is not legible or missing!

My German heritage didn't allow me to know tractors built in Germany had a book of origin. My grand parents immigrated from Germany to USA & spoke very fluent German.

 

[historyan1975]

So registry book doesn't contain tractor serial #? I'll guess your tractors serial# is not legible or missing!

My German heritage didn't allow me to know tractors built in Germany had a book of origin. My grand parents immigrated from Germany to USA & spoke very fluent German.

You have right... I will check it... I live in Romania, but I am hungarian... I understand Englush but I cant speak... Here also lived germans.. . Transylvania, Siebenbürger... My grandgrandfather worked in USA, between 1909 and 1928, in Detroit, but he returned. We have relatíve in USA