woodsleeboy
New member
I'm thinking about installing in floor heating in my pole barn. My building is 28x40x12. Does anyone have any info on how to do it (without spending a fortune on a commercial system?) Can I use a domestic hot water tank?
in floor heating
- Thread starter woodsleeboy
- Start date
- Views: 1317
midlf
Platinum Member
Do a google search on "radiant floor heat" and "hydronic floor heat" and you will get a lot of good hits.
also try the radiant panel association at:
radiant panel
Water heater use as a source depends on your local code. In WI you cannot use a water heater unless the mfr has listed radiant heat as an approved usage.
also try the radiant panel association at:
radiant panel
Water heater use as a source depends on your local code. In WI you cannot use a water heater unless the mfr has listed radiant heat as an approved usage.
midlf
Platinum Member
I'm planning on doing the same thing this year in my 30X75 building. PM me and I will send you my favorites listing for my radiant floor project. I think I have about 30 listings.
marks
Silver Member
Assuming that you intend on installing a concrete floor, not too long ago I saw a class action suit against the manufacturer of the tubing as it had a tendency to rupture after some period of time. Just something to think about.
Overall, I hear that the heating is even and comfortable, yet slow to respond to heating demands.
Overall, I hear that the heating is even and comfortable, yet slow to respond to heating demands.
PineRidge
Super Member
While it is possible for a remote leak on the non metallic tube like Wirsbo, in all the years I was in the HVAC industry I saw but one leak under a concrete floor and it was plumbed with copper.
drzmatt
Member
This is how I did it. F/BB/WP reflective insulation underneath, wire to tie the tubing to and 600' of PEX tubing for a 24' by 24' area. I will be heating it with an outside wood boiler.
