I have yet to even sit in the seat and will not until I read all these manuals from front to rear. It has been over 30 years since I drove a tractor and plan to take it slow. I had loggers come in and cut me out a road and clear about 10 acres so I could build the wife a new house and they left a mess so after clearing over 300 stumps by hand this will make it easier.
I got my new tractor
- Thread starter ArmyPair2
- Start date
- Views: 6048
xring100
Veteran Member
- Joined
- Dec 9, 2012
- Messages
- 1,540
- Location
- Livingston County, Michigan
- Tractor
- Kubota M8540, ZD1211 60"
Congrats what did you get? We need pictures 
Marveltone
Veteran Member
- Joined
- Jun 20, 2010
- Messages
- 1,483
- Location
- Somewhere north of Roseau, MN
- Tractor
- Fordson Major Diesel, McCormick Deering W4, Ford 1510, John Deere L111
Pics or it didn't happen!
Oh, by the way, CONGRATS! :applause:
Joe
Oh, by the way, CONGRATS! :applause:
Joe
- Joined
- Jan 15, 2013
- Messages
- 13,694
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Good on you.
Pics, pics, pics!roposetoast:
Pics, pics, pics!
roposetoast:
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,522
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
congrats on the new machine
- Joined
- Jan 15, 2013
- Messages
- 13,694
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
If the pictures are loaded on you computer, when you "+ Reply to Thread", click the "Go Advanced". In there you will see the icon (paperclip) for downloading & attaching your pictures to the reply.
It's pedantic, but eventually you'll get used to the procedure.
Heck, if I can do it, anyone can. :laughing:
It's pedantic, but eventually you'll get used to the procedure.
Heck, if I can do it, anyone can. :laughing:
- Joined
- Jan 15, 2013
- Messages
- 13,694
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Thanks for the pics, Mate! Very pretty looking rig.
It's got enough flashy decals to run in one of your NASCAR races! :thumbsup:
It's got enough flashy decals to run in one of your NASCAR races! :thumbsup:
DutchHenryBrown
Platinum Member
Very NICE looking, now get out there and get her dirty!
PhysAssist
Elite Member
- Joined
- Aug 22, 2011
- Messages
- 2,639
- Tractor
- Kubota B2320
Hi ArmyPair2,
So you got a new ride, and now a new skill too!
I'm glad you got pics, and wish we had.
That's a nice rig, and I envy you your roof, though we prolly don't need the shade up here as much as you do down there in 'Bama-land.
Congratulations, and good-on-ya for reading the destructions first!
Keep your manual close by and at hand, because if the manuals are anything like Kubota's, you will have to refer to it a bunch of times before you get all the grease zerks, maintenance milestones, and various arcane procedures and rituals you will need to perform on a hourly, daily, weekly, and seasonal basis.
Tractor on in good health, and watch out for tipping points!
Thomas
So you got a new ride, and now a new skill too!
I'm glad you got pics, and wish we had.
That's a nice rig, and I envy you your roof, though we prolly don't need the shade up here as much as you do down there in 'Bama-land.
Congratulations, and good-on-ya for reading the destructions first!
Keep your manual close by and at hand, because if the manuals are anything like Kubota's, you will have to refer to it a bunch of times before you get all the grease zerks, maintenance milestones, and various arcane procedures and rituals you will need to perform on a hourly, daily, weekly, and seasonal basis.
Tractor on in good health, and watch out for tipping points!
Thomas
Baby Grand
Elite Member
- Joined
- Nov 12, 2007
- Messages
- 4,663
- Location
- Windsor, CT.
- Tractor
- Kubotas: L3240GST B2320HST B5100D & G5200H
Goodbye stumps!
Congratulations on your new beast of burden.
Good luck with the new place - send us progress updates (with photos).
In case you hadn't noticed, the gang loves photos.
Your back is going to thank you.
Congratulations on your new beast of burden.
Good luck with the new place - send us progress updates (with photos).
In case you hadn't noticed, the gang loves photos.
Your back is going to thank you.
NativeSon
Veteran Member
Congrats! Now the fun starts.
Charlie
Charlie
jet7271
New member
- Joined
- May 30, 2013
- Messages
- 4
- Location
- rogersville, MO
- Tractor
- John Deere 790 w/ FEL & 5' brushhog. 64' MF 65 w/ 7' brushhog
congrats on new tractor! file:///C:/Documents%20and%20Settings/Owner/My%20Documents/My%20Pictures/florida%20june%20%2713/florida%20june%20%2713%20157.jpg. i'm trying to learn to post pics too.
GManBart
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 4,976
- Location
- Detroit, Michigan
- Tractor
- Massey Ferguson 241, Kubota SVL90-2
Always a fun day when the new machine arrives! :cool2:
wmonroe
Elite Member
Congrats on the new tractor! Why is it on a semi in one picture and a flatbed in another?
zonta223
Platinum Member
- Joined
- Aug 26, 2009
- Messages
- 538
- Location
- Adelaide South Australia
- Tractor
- Foton FT404, International 444 with forklift, International B250, Kubota L2000DT, Truck converted to all terrain forklift and lots of other junk
Congratulations on the new tractor......from the photos it looks like a Foton or Foton copy........Happy tractoring
wmonroe
Elite Member
That's a good point, could be. Didn't want to derail the thread just was curious.
