Hydraulic SSQA idea

   / Hydraulic SSQA idea #21  
Yes exactly. I swap between forks and bucket attachments quite a bit and that's really what it will be used for. The valve will be mounted right by the seat for easy operation.
Are you taking about mounting the manual diverter by the seat?
 
   / Hydraulic SSQA idea #22  
What about changing back and forth between buckets and forks and other inplements that have no hydraulics? I would rather be able to operate it from the seat otherwise I can just flip the levers if I am up front anyway...
You still wouldn't have to get of the tractor to switch implements, only when connecting something that's going to use the 3rd function, which you would have to get off to connect the hoses anyway.
 
   / Hydraulic SSQA idea #23  
I don't have the additional hydraulic circuit on my tractor yet, but its on my list of things to do because I do want a grapple, and being able to hydraulicly articulate my snow plow would be NICE! With that said, I think this is what I want to do for operating the SSQA.


Inexpensive, easy to install, easy to revert back to manual, easy to maintain, easy to replace, and seems to be holding up well.
 
   / Hydraulic SSQA idea
  • Thread Starter
#25  
I don't have the additional hydraulic circuit on my tractor yet, but its on my list of things to do because I do want a grapple, and being able to hydraulicly articulate my snow plow would be NICE! With that said, I think this is what I want to do for operating the SSQA.


Inexpensive, easy to install, easy to revert back to manual, easy to maintain, easy to replace, and seems to be holding up well.

I thought about doing the electric version of it, but think I would rather do it with hydraulics.
 
   / Hydraulic SSQA idea #26  
Getting off and on my tractor to lock the QA pins is a big part of my exercise program :LOL:
 
   / Hydraulic SSQA idea #28  
I don't have the additional hydraulic circuit on my tractor yet, but its on my list of things to do because I do want a grapple, and being able to hydraulicly articulate my snow plow would be NICE! With that said, I think this is what I want to do for operating the SSQA.


Inexpensive, easy to install, easy to revert back to manual, easy to maintain, easy to replace, and seems to be holding up well.
What's your total cost with wiring relays connector etc. end up being?
 
   / Hydraulic SSQA idea
  • Thread Starter
#29  
I would mount it on the loader at the 3rd function quick couplers, save you from running additional hoses.

I plan to do a manual valve. I suppose I could do an electric one and mount the valve on the loader.
 
   / Hydraulic SSQA idea
  • Thread Starter
#30  
What's your total cost with wiring relays connector etc. end up being?
It can be done pretty cheap with an electric actuator.


 

Tractor & Equipment Auctions

2015 FORD F-250 XL SUPER DUTY TRUCK (A51406)
2015 FORD F-250 XL...
2019 Ford Explorer AWD SUV (A50324)
2019 Ford Explorer...
2011 L3 GENERATOR SET (A51222)
2011 L3 GENERATOR...
2006 GENIE GTH6622 TELESCOPIC FORKLIFT (A51242)
2006 GENIE GTH6622...
Caterpillar 730 Articulated Dump Truck (A49346)
Caterpillar 730...
2014 CATERPILLAR CT6605 SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
 
Top