Greasing suggestion needed

/ Greasing suggestion needed #1  

rthrbhntg

New member
Joined
Mar 11, 2012
Messages
9
Location
Delaware Co NY
Tractor
Kubota MX5100
Any advise on after how many hours to grease the pto shaft and best methods for a mx5100?
 
/ Greasing suggestion needed #2  
i grease my mowers after every use.. that includes the telescoping frive shafts and joints and yokes.. pushes dirt out.. good lub for a high stress area..
 
/ Greasing suggestion needed #3  
My Woods RD7200 mower suggest 25 hours. I adhere to that.
 
/ Greasing suggestion needed #4  
I grease about every 10 hours of mowing use, Which where I live is only 2 or 3 times a year at most. When I mowed 7 acres at another location, I greased every mowing session.

James K0UA
 
/ Greasing suggestion needed #5  
Were you referring to the PTO stub on the back of the tractor? If so, a cleaning to get the grit off and a very light coat of grease once in a while is enough. You don't want gobs of grease hanging off and attracting dirt. I use the rubber cover it came with most of the time to keep it clean when I'm not using the PTO.

Sean
 
/ Greasing suggestion needed #6  
Were you referring to the PTO stub on the back of the tractor? If so, a cleaning to get the grit off and a very light coat of grease once in a while is enough. You don't want gobs of grease hanging off and attracting dirt. I use the rubber cover it came with most of the time to keep it clean when I'm not using the PTO.

Sean

Ditto that

Charlie
 
 
Top